Swiss-type cnc lathe

TORNOS GAMMA 20/6

Condition: used, Year of construction: 2002, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm dimensions of the machine ca. 3,6/3,5 m Photos of identical machine with centre height 225mm Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding head UR with T1-T2-T3 Basic equipment: -T1 500mm grinding disc diameter -T2 400mm grinding wheel diameter -Infinitely variable, high-resolution axis -Marposs measuring device for tool measurement -Active longitudinal positioning -GAP on T1 and T2 from ELASO contactless integrated in the control interface Semi-automatic balancing from ELASO integrated into the control interface -Tailstock with manual retraction -MK5 workpiece headstock with short taper DIN 55026 Belt-driven internal grinding device Options at an extra charge: - New high-precision workhead with torque drive - Internal grinding device for high-frequency spindles diameter 120mm -HF internal grinding spindle Fischer MFM-1224/42/31 D-21 -HF spindle with HSK holder 24,000 rpm with integrated GAP sensor. (delivery time) -CNC-controlled C-axis non-circular grinding -hydrostatic threaded spindle in x -new hydrostatic unit with only 1 pump and pressure accumulator thus better energy efficiency. -monitoring of the water content in the hydrostatic system -Suction system Further options available on request Mechanical overhaul: -Complete machine overhauled according to Kellenberger measurement protocol -New service-friendly cab -repainting Electrical overhaul: -New modern CNC CIRCULAR GRINDING MACHINE control with BEMA rough grinding surface -New control cabinet -New drive technology -Replacement of all electrical cables Berus pressure switches etc. -New absolute glass scales in x and z -New absolute rotary encoder (for B-axis) Control system: The grinding software consists of a basic licence and various options that are possible depending depending on the equipment of the machine. Basic software - External and internal pendulum grinding - External and internal plunge-cut grinding - External and internal pendulum grinding - External and internal plunge-cut grinding - External and internal taper pendulum grinding - External and internal radius grinding, radius dressed on disc - Semi-automatic pendulum grinding - Workpiece zeroing - Grinding wheel zeroing - Measuring the dressing diamonds - 2 moulding diamonds - 1 shaped diamond or dressing roll (dressing roll required) - Moulding roller (dressing roller required) - 3 Flat dresser - Corrections - Z-position measurement (probe required) - GAP probing (grinding device required) OPTIONS at an extra charge: Software profile plunge-cut grinding: - External and internal profile plunge-cut grinding with profile disc Profile grinding software: - External and internal profile grinding with straight disc Software thread grinding: - Single and multi-start external and internal thread grinding with thread on the disc disc Dressing. Dressing of single and multi-groove discs. Flank angle freely selectable. Njdsuxfucopfx Afrsdd Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge-cut grinding: - External and internal non-circular plunge-cut grinding Non-circular grinding software: A prerequisite for non-circular grinding is that the workpiece axis is equipped with a high-resolution rotary encoder so th...

Condition: new, Year of construction: 2024, Oy Foudila Ab is a company, in Kaskinen, Finland with over 45 years of experience in equipment for timber handling. For the past 15 years, we have also been active in pallet industry and have developed a lot of machines over the years for nailing, automatic timber feeding and stacking. We manufacture both standard machines and customized solutions for the customer's purposes LNM3500 is a flexible, compact and efficient pneumatic nailing machine for manufacturing legs for pallet production. User-friendly program, which means the changeover takes place very quickly and the machine can save settings for over 100 different legs. Three Bostitch nail guns with magazines for jumbo coils equipped with indicators. Possible to produce legs with 2-30 blocks/leg. Equipped with large cassette for boards. Protective cover for sound attenuation and for a safe function. The machine is controlled from a 10" touch screen. Beckhoff control system. The machine can be equipped with an optimized block cutter, as well as automatic block feeding into the nailing machine. The block cutter can be mounted on the back side of the nailing machine or on the side. Dimensions for standard machine: - Boards: Length 600-3500mm, Width 60-125mm, Height 16-28mm - Blocks: Length 60-150mm, Width 60-125mm, Height 50-100mm Capacity: - 21 blocks/min Machine dimensions (without block cutter): Ndodpfxsi Hkqms Afrsd - Length 9000mm, Width 1000mm, Height 1900mm The machines is CE-marked. The leg nailing machine can also be equipped with automatic stacker for finished legs. Do not hesitate to contact us for more information, pictures and videos.

Condition: used, Wursten & Dietz mechanical nailer. Nsdpfjlvripex Afrsdd Prepared for nailing skates. The machine is sold as is.

Condition: like new (used), Year of construction: 2022, operating hours: 13,116 h, Max. bar capacity mm: 20 Max. Z-axis travel (sliding headstock/fixed headstock) mm: 205 / 80 Max. spindle speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 C-axis resolution degrees: 0.001 Max. rapid traverse Z m/min: 20 Tool stations: 8 Driven tools: 8 Max. tool speed rpm: 12,000 / 8,000 Tool holder diameter mm: 45 Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 / 165 Slide travel Y mm: ±25.4 Slide travel Z mm: 254 / 567.5 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 B-axis swivel angle degrees: 105 Lower turret: Tool stations: 8 Driven tools: 8 Max. tool speed rpm: 12,000 Tool holder diameter mm: 45 Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Nedpfxjwuddve Afredd Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 Slide travel Y mm: ±25.4 Slide travel Z mm: 155 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 Back working device: Tool stations: 4 Slide travel X/Y/Z mm: 120 / ±25.4 / 155 Tool holder diameter mm: 25 Sub spindle: Max. spindle bore mm: 20 Max. spindle speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 Slide travel X mm: 235.5 Slide travel Z mm: 258 C-axis resolution degrees: 0.001 Rapid traverse X/Z m/min: 20 / 40 Coolant system basic unit: Pump pressure bar: 3 / 8 Tank capacity l: 250 Flow rate at 3 / 8 bar l/min: 80 / 120 Filtration degree µm: 200 Machine dimensions Length x width x height mm: see installation plan* Weight kg: 5,000* Connected load kW: 40 (47 kVA)

Year of construction: 1999, condition: ready for operation (used), Working width: 230mm, working height: 160mm, number of spindles: 5, spindle diameter: 50mm, spindle power: 4x 5.5kW/2x 11kW, feed rate: 24m/min, input table length: 3000mm, vertical spindle axial stroke: 80mm, horizontal spindle axial stroke: 45mm. Connected load: 126kW, air requirement: 8400-9600m³/h, machine dimensions X/Y/Z: approx. 3500mm/2000mm/1800mm, weight: approx. 3500kg. Including Weinig EM-11 slide-in unit and suitable distributor for the extraction system. Documentation available. On-site inspection is possible. Ndedpfxeu Damde Afred

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 20 [mm] - Max. machining length : 210 [mm] - Spindle speeds : 12000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 12000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.001 [°] - Number of guide bush holders : 2 GUIDE BUSH HOLDER 1 - Number of positions : 8 Ndjdpfeuha Nwex Afrsd - Number of motorized positions : 3 - Live tools speed : 8000 [rpm] GUIDE BUSH HOLDER 2 - Number of positions : 5 - Number of motorized positions : 2 - Live tools speed : 8000 [rpm] END ATTACHMENT - Number of positions : 5 SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 POWER SUPPLY - Supply voltage : 400 [V] MACHINE HOURS - Number of spindle hours : 18849 [h] EQUIPMENT - CNC : Fanuc 31i-model A - Rotating tool motor on : S11,S21,S51 - Rotating guide bush - Parts catcher - Parts conveying strip - Ejection of workpiece - Chips conveyor - Coolant tank * with high-pressure pump : 20 [bars] - Bar loader : TORNOS SBF320 - Electric transformer - Number of turning tool holders : 5 - Double turning/milling tool holder : 1

Condition: ready for operation (used), Year of construction: 2021, General Data Machine weight 2500–2950 kg This 12-axis Citizen Cincom M16-4M8 was manufactured in 2021, featuring a robust configuration with up to 38 tools, including gang, turret, and back tool post options. It supports a rapid feed rate of 32 m/min, with specialized rates for X2, Y2, and B axes. The main spindle motor outputs 2.2/3.7 kW, ensuring efficient operations. Consider the opportunity to buy this Citizen Cincom M16-4M8 Swiss type turning machine. Contact us for more information about this machine. Nsdpfxextgldo Afredd Application Types Turning

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 20 [mm] - Max. machining length : 170 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 2.2 [kW] - C axis indexing precision : 1 [°] - Number of guide bush holders : 1 - Number of positions : 8 - Number of motorized positions : 3 - Live tools speed : 5000 [rpm] END ATTACHMENT - Number of positions : 4 SECONDARY OPERATION - Number of positions : 7 POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 11 [kW] WEIGHT & DIMENSIONS - Machine floor space : 1640 x 1200 [mm] - Machine height : 1725 [mm] - Machine weight : 1950 [kg] MACHINE HOURS - Number of working hours : 21523 [h] EQUIPMENT - CNC : Fanuc Oi-TD - Rotating guide bush - Parts catcher - Parts conveying strip - Ejection of workpiece - Coolant tank - Predisposition for barfeeder Nedpfx Aouha Tvjfredd - Bar loader : fedek - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer

Condition: used, Year of construction: 1994, functionality: fully functional, Working width : 220 mm Working hight : 140 mm Infeed speed : 6-60 mtr/min( Inverter controlled ) Infeed engine : 7,5 Kw Spindle diameter : 50 mm Configuration : Hydraulic infeed device 1. buttom 7,5 kw 2. Right 7,5 Kw 3. Left 7,5 Kw 4. Right 7,5 Kw 5. Top 7,5 Kw 6. Buttom 7,5 Kw 7. Top 7,5 Kw 8. Buttom 7,5 Kw 9. Right 15 Kw ( Multi rip/saw spindle ) 10 Left 15 Kw ( Multi rip/saw spindle ) Ndedpeq Dkknofx Afred Central Waxilit lubrication All tools on the machine included in the price Lots of extra tools/rings/heads included in the price Transport dimensions : L 5600 x W 1800 mm We offer a live video presentation of the machine on WHATSAPP

Condition: used, Year of construction: 2000, Weinig Unimat 23E planer and moulder for four-sided planing and profiling of wood, with a mobile spindle for automatic adjustment and a grooved bed (optionally without grooved bed) for short and curved workpieces, as well as a long planing table. Included: Set of grooved bed cutters Optional: Conversion to a conventional smooth table, available upon request. spindles: 5 spindle 1: Bottom / 40 mm / 5.5 kW spindle 2: Right / 40 mm / 7.5 kW spindle 3: Left / 40 mm / Common motor with spindle 2 spindle 4: Top / 40 mm / 7.5 kW spindle 5: Bottom / 40 mm / 5.5 kW working width: 230 mm Nedswztw Sopfx Afrodd working height: 160 mm