Belt Grinding Machine

Timesavers 42-Serie-1600-WWB

Condition: like new (used), Year of construction: 2021, functionality: fully functional, overall weight: 5,500 kg, compressed air connection: 6 bar, table length: 1,600 mm, input frequency: 50 Hz, input voltage: 400 V, workpiece width (max.): 4,000 mm, workpiece length (max.): 1,500 mm, Used TIMESAVERS Model 42-Series-1600-WWB -- LIKE NEW -- For grinding and satin finishing stainless steel sheet surfaces. Wide belt sanding machine featuring two top-mounted wide belt sanding units and one brush unit. This is a dry-operating machine equipped with a Wandres production cleaning brush. Please note: The roller table shown in the gallery image is NOT included with the above-mentioned machine! Technical Data: Year of manufacture: 2021 Minimum workpiece dimensions: 750 mm x 1000 mm x 2 mm Maximum workpiece dimensions: 4000 mm x 1500 mm x 6 mm Abrasive belt dimensions (W x L): 1630 x 2620 mm Table opening: 2-100 mm Adjustment accuracy: 0.01 mm Flat feed belt Feed speed: 4-20 m/min Electrical: Main motor 1st unit, frequency controlled: 22 kW Main motor 2nd unit, frequency controlled: 22 kW Main motor 3rd unit, frequency controlled: 15 kW Feed motor: 3 kW Electrical connection: 400 V Frequency: 50 Hz Compressed air: Required air pressure: 6 bar Air consumption per unit: 30 l/min Wandres air consumption: 235 l/min Dust extraction PER unit: Required capacity at 125 mm water column: 10,000 m³/h Wandres brush: 600 m³/h Machine weight: 5,500 kg Hsdpfx Amsq Tp H Hoyer Extraction and/or on-site installation services can be offered upon request. Please note: The roller table shown in the gallery image is NOT included with the above-mentioned machine!

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 55,771 h, laser hours: 35,157 h, laser power: 3,200 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 8 mm, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 150 mm, positioning speed: 140 m/min, positioning accuracy: 0.02 mm, year of last overhaul: 2024, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 150 mm, Equipment: cooling unit, documentation/manual, safety light barrier, The laser is in operation, can be inspected and tested. Regularly serviced in good technical condition. Mirrors completely replaced in 2024. Hsdpev Hxbbjfx Amysr

Condition: new, Year of construction: 2025, Metal picket fence roll forming machine MFP-1 was designed by our company to produce semi-round shape picket metal fence profile. This profile is widely used and popular among companies with business in manufacturing, installation and selling of metal fences. The production of the profile goes gradually, at first hemming forms on edges from the flat metal, and then the height of the profile and the semi-round shape are formed, at the last stage of rolling machine forms the rib in the profile center. Such number of forming stages makes it possible to ensure smooth sheet changes during rolling, as well as high quality of the final product. As a blank, you can use a strip of required width and length, to prepare it with pre-cut on other equipment – sheet metal slitting machine or guillotine shear. After roll forming, to make fence picket end look better, you can use special cutting press of our production. The working tools of such press have special round configuration and are the same as semi-round metal picket shape to make appropriate cutting. Those tools are made from special tool steel, and goes through process of hardening so ensure high requirements for the cutting tools of the equipment. Hedpfx Amsm Twnloyor Our company can produce as semi-automatic rolling machine for the metal fence pickets manufacturing and a manual punching press for it, as well as a fully automatic line. Such metal fence automatic line can have following components: console metal decoiler, a rolling machine equipped with an automatization system with the ability to program the number of required pickets for rolling and their lengths, automatic electric shear for cutting metal at the end and stacker part. Thus, cooperating with us, our customers can choose the best option for their manufacturing process according to their planned production volumes, budget, etc. For more details about metal picket fence roll forming machine MFP-1 please contact our sales department

Condition: used, functionality: fully functional, Year of construction: 2000, overall weight: 1,000 kg, total height: 3,500 mm, load capacity: 2,500 kg, throat depth: 5,000 mm, working height: 3,000 mm, DGUV certified until: 06/2025, Equipment: documentation/manual, Column-Mounted Jib Cranes & Wall-Mounted Jib Cranes TAUCHA / DEMAG / LIFTKET – 50 kg to 2,500 kg – Electric Chain Hoist – Multiple Systems Available For sale are several column-mounted and wall-mounted jib crane systems from Mechanik Taucha Fördertechnik GmbH, Demag, and Liftket. The systems offer a load capacity range from approximately 50 kg up to 2,500 kg, making them suitable for use in workshops, manufacturing plants, assembly workstations, as well as in in-house logistics. Some of the cranes are designed as classic column-mounted jib cranes with a single jib arm, while select models feature a double-jib column design, allowing coverage of two separate working areas. All cranes are equipped with electric chain hoists and trolley carriages, operated via pendant controls. The systems can be purchased individually. Inspection by appointment is possible. Taucha Column-Mounted Jib Crane – Load capacity 2,500 kg Heavy-duty column-mounted jib crane with floor-mounted steel column and jib arm for industrial lifting and assembly applications. Taucha Column-Mounted Jib Crane – Load capacity 2,000 kg Column jib crane with pivoting jib for material handling in production and assembly areas. Taucha Column-Mounted Jib Crane – Load capacity 1,600 kg Industrial crane with column base and pivoting jib, suitable for medium to heavy loads. Taucha Column-Mounted Jib Crane – Load capacity 1,250 kg Column jib crane with jib arm and trolley for precise material movement. Taucha Column-Mounted Jib Crane – Load capacity 1,000 kg Column jib crane with electric chain hoist and pivoting jib for assembly workstations. Taucha / Liftket Column-Mounted Jib Crane – Load capacity 1,000 kg Column jib crane with Liftket electric chain hoist, suitable for industrial lifting operations. Taucha Column-Mounted Jib Crane – Load capacity 800 kg Column jib crane with pivoting jib and trolley, ideal for workshop and production areas. Taucha Column-Mounted Jib Crane – Load capacity 800 kg (Double Jib) Column jib crane with two opposing jib arms, suitable for servicing two workstations. Taucha / Liftket Column-Mounted Jib Crane – Load capacity 500 kg Column jib crane with electric chain hoist, ideal for lighter lifting tasks. Liftket Column-Mounted Jib Crane – Load capacity 500 kg Column jib crane with Liftket chain hoist and pivoting jib. Demag Wall-Mounted Jib Crane – Load capacity approx. 315 kg Wall-mounted jib crane with Demag electric chain hoist, suitable for workstations with limited space. Taucha Column-Mounted Jib Crane – Load capacity 250 kg Compact column-mounted jib crane for light loads. Taucha Column-Mounted Jib Crane CS KD 250-6 – Load capacity 250 kg Column-mounted jib crane with pivoting jib and electric chain hoist. Liftket Column-Mounted Jib Crane – Load capacity 250 kg Column jib crane with Liftket electric chain hoist for assembly tasks. Taucha Column-Mounted Jib Crane – Load capacity 200 kg Column jib crane for light material handling. Taucha Column-Mounted Jib Crane – Load capacity 125 kg Lightweight column jib crane for smaller components and tools. Hedoyt Hc Dopfx Amyjr Taucha Column-Mounted Jib Crane – Load capacity 100 kg Compact workshop crane for light loads. Taucha Column-Mounted Jib Crane – Load capacity 50 kg Very light jib crane for small lifting applications.

Year of construction: 2001, condition: like new (used), Double-aggregate grinder, two lower aggregates 2 x7.5 kW main power, 4 kW feed, lifting and lowering 2 kW, the machine after renovation, conveyor belt in very good condition. New graphite shoe. The machine has two aggregates from the bottom, contact rollers rubber first shaft second Combi system with graphite runner. Working width 630 mm. Two feed speeds slower faster. Length of grinding belt 1900 mm. Pneumatic oscillation. Tensioning the belts pneumatically. Speed of grinding belt 18 m / s. grinding shoes 1. Declaration of conformity CE power 21 kW nominal whole. Machining height 160 mm. Maszyan has two lower working shafts. Transport tape top system. Hodpjfxpbmjfx Amyjr

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, operating hours: 1,000 h, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller model: CypCut FSCUT 3000DE, laser type: fiber laser, laser source manufacturer: Reci, laser hours: 1,000 h, laser power: 2,000 W, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, pipe diameter (max.): 245 mm, pipe length (max.): 6,000 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 1,500 mm, travel distance Y-axis: 3,000 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 15 bar, Equipment: centralized greasing system, cooling unit, dust extraction, fume extraction, 2 kW Fiber Laser for Sheet Metal Cutting + Pipe Cutting Attachment Ø245 mm – Complete HOYSOOK Set, Model 3015, in Excellent Condition – Used Only for Short Production Test Series, Year of Manufacture: 2024. Manufacturer: HOYSOOK Model: 3015 Year of Manufacture: 2024 Fully Industrial Set Reason for Sale: Change in Production Profile Operating Hours: < 1000 h Description: For sale: Modern fiber laser (2,000 W) for cutting sheet metal and pipes. The machine is in a full industrial configuration, manufactured in 2024, and the laser source has less than 1,000 hours of operation – practically as new. The machine is fully operational and ready for immediate commissioning at its new location. The unit was used exclusively for small batch production and has only gone through the break-in period (picture of the meter available in the gallery). The sale is due to a change in production profile – the device will not be used as frequently as originally planned. Working Parameters: Hedpfxeytccgo Amyer • Sheet metal cutting area: 3000 x 1500 mm • Maximum pipe length with attachment: 6000 mm, diameter Ø245 mm • Power supply: 380 V, 3-phase, 50/60 Hz • Positioning repeatability: ±0.03 mm • Maximum cutting speed: 50 m/min • Cutting examples: mild steel up to 12 mm, stainless steel 2 mm, aluminum 1 mm Industrial-Grade Equipment: Mechanics and Drives: • Welded steel bed, hardened and tempered – maximum durability and stability • Gantry beam made of aluminum profiles • Veichi servo motors and drivers • France Moto gear reducer • Taiwanese YYC gear rack • TBI ball screw • HIWIN (Taiwan) or SMAGIC (Japan) linear guides Laser Head and Source: • Raytools BM110 laser head with autofocus and automatic height tracking function • Reci laser source, total hours

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, turning diameter over cross slide: 570 mm, spindle bore: 62 mm, turning length: 1,250 mm, turning diameter over bed slide: 365 mm, center height: 280 mm, overall weight: 4,000 kg, O F F E R We can offer you, subject to prior sale and errors excepted, ex-stock and without obligation: V D F - BOEHRINGER Cycle-Controlled Universal Lathe Model DUS 560 Year of Manufacture 1998 / completely overhauled in 2008 _____ Centre height 280 mm Max. swing diameter over bed 570 mm Max. swing diameter over cross slide 365 mm Hsdpfx Amoyqw Eqoyor Cross slide / top slide travel 345/125 mm Centre distance / max. turning length 1,250 mm Spindle bore 62 mm Spindle speeds, 2-step infinitely variable 3–500 / 15–2,500 rpm Infinitely variable longitudinal and facing feeds 0.01–50 mm/rev Rapid traverse longitudinal/cross 5 and 10 m/min Max. feed force facing/longitudinal 6.5 / 12.5 kN Workpiece weight max. between centers/with tailstock 400 / 1,000 kg Thread pitches 0.1 – 400 mm/pitch Spindle drive motor 15/21 kW Total drive 25 kW - 400 V - 50 Hz Weight approx. 4,000 kg Accessories / Special Equipment: • SIEMENS 2-axis cycle control, type 805, with direct input of all turning parameters via interactive user interfaces and suitable software, controller and monitor integrated in the sliding door, with memory extension and software for free contour entry, graphics, etc. • 2 electronic handwheels for fine adjustment of carriage movement in Z and X axes, and new joystick for rapid traverse +Z/-Z and +X/-X, joystick for main spindle with stepless forward and reverse speeds • Mounted 3-jaw chuck model SCA Ø 300 mm, faceplate approx. Ø 500 mm, 4-jaw chuck Ø 315 mm, driver plate approx. 250 mm, single faceplate 500 mm, various jaws • Mounted MULTIFIX toolpost type CD with 5 different Multifix holders • Separate toolpost block for mounting CAPTO toolholder with internal coolant supply, various holders, partially with collets • Tailstock with air bearing for easy movement, work light • Mobile chip trolley with coolant pump and oil skimmer, 2 rear sliding doors • Separate electrical cabinet, adjustable spindle end stop, work light, etc. Condition: very good – guides in very good condition, machine is under power and ready for demonstration Please click here for a video of the machine: Delivery: ex stock – as inspected Payment: strictly net before delivery We look forward to receiving your order. Further lathes of all sizes in stock – please enquire.

Condition: excellent (used), COSTA LEVIGATORS Series S model SN 5-groups first group electronic sectioned transverse belt second group 1 roller third group 1 roller fourth group electronic sectioned pad super finisher fifth group electronic sectioned transverse belt machine width 1350 vacuum inverter on all belt groups inverter on belt outfeed brush group Hedpfsr Iyvmex Amysr blower group on outlet

Condition: as good as new (ex-display), Year of construction: 2008, machine/vehicle number: LSP 100T, Productions-Hydraulic press with H-column 100t with guidance Manufacturer: Stenhoj Denmark Year of construction: 2008 Pressure force max. 1,000 kN / 318bar Hodpfxeg Rn Efo Amysr Press cylinder, stroke length: 400mm Press table with T-slot 1,500x900mm above 1,500x1,050mm below Stand passage 1,700mm Condition as good as new, the machine was only used for test runs and has been in stock since then. All statements without guarantee. Without transport costs.

Condition: ready for operation (used), Year of construction: 2013, This Okuma MCR-A5C30x65 gantry milling machine was manufactured in 2013. It features a robust 100 mm spindle, capable of speeds up to 4000 min⁻¹, and accommodates a maximum workpiece size of 2540 mm by 5540 mm. The machine supports a hefty 30,000 kg on its 2500 × 6300 mm table. Ideal for heavy-duty milling with a rapid feed rate of 20,000 mm/min. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Dimensions of machine (lxwxh): 2500 mm x 6600 mm x 6350 mm / weight (kg): 59000 kg • Max workpiece width: 2540 mm / max workpiece length: 5540 mm Hedsx D S Ekepfx Amysr • Table size (width × length): 2500 mm × 6300 mm /max load on table: 30000 kg table height from floor: 850 mm /effective width between columns: 3050 mm/ t-slot (width × number): 24h7 × 13 • Cutting feed rate: 1 to 10000 mm/min/ rapid feed rate: 20000 mm/min/ table movement x-axis: 6500 mm /x-axis travel: 6500 mm /y-axis travel: 3500 mm/ z-axis travel: 650 mm • Tool holder: bt50 + masz type/ tool storage capacity: 50 tools /max tool length: 300 mm • Power supply: 400v, 3 /phases, 50hz rated capacity: 513 kva /full load current: 741 a /peak current: 117/138 a /short circuit current: 18 ka • Spindle diameter: 100 mm /spindle speed: 30 to 4000 min⁻¹ • Large table size suitable for heavy loads. /extensive tool storage capacity. /high rapid feed rate for efficient operations.