Welding machine

TECNA 4625N

Condition: used, Year of construction: 2007, functionality: unexamined, overall weight: 240 kg, type of cooling: water, welding power (max.): 35 kVA, Equipment: type plate available, Brand: Tecna Model: 4625|N Year of manufacture: 2007 Serial number: 01530 Capacity (kVA): 35 Lhsdpfxjwt S Ads Ag Rjp Voltage: 400 Frequency (Hz): 50 Dimensions LxWxH (mm): 1150 x 400 x 1650 Weight (kg) approx.: 240 Quantity in stock: 1 Manufactured in: Italy Max. stroke (mm): 400 Digital brand & model: Yes Comments: Optic in very well maintained condition, untested, water cooling not included

Year of construction: 2017, condition: ready for operation (used), Laser power: 10kW (10000W), working range: 3000mm/1500mm, max. material thickness: mild steel: 25mm, stainless steel: 30mm, aluminum: 30mm, copper: 12mm, brass: 15mm. Positioning speed: 120m/min, positioning accuracy: +/-0.05mm, max. workpiece weight: 1100kg. Machine dimensions X/Y/Z: approx. 9500mm/3500mm/3500mm, suction dimensions X/Y/Z: approx. 1500mm/1500mm/4000mm, machine weight: approx. 12000kg, operating hours: approx. 17000h. Documentation available. On-site inspection is possible. Expected to be available from June 2025. Lhjdpovyiqgjfx Ag Rop

Year of construction: 2023, condition: new, - modern ergonomic design - manual test with analogue Measuring Clock (Reading accuracy 0.2 HR) - easy to use and quick test process - Height Capacity approx. 185mm - Hepth Capacity approx. 160mm - Dimensions 545x182x755mm Test loads: 60 / 100 / 150kg Test method: HRA/HRB/HRC Standard delivery: - Hardness tester - V-Anvil - Flat Anvil Ø150mm - Flat Anvil Ø50mm - Ball Indenter 1/16" with ball - Diamond indenter 120° Rockwell - Spindle protection Lsdpfopbbc Hjx Ag Rjhp - Accessory case

Condition: used, CNC flame cutting machine BACH type ACW 2500 Lhjdpfx Aef Ncadeg Rop Flame cutting machine with CNC control NBS 400 Machine. No. 14 561-06 Year of construction 2006 Cutting area 2500 x 6500 mm track length 8000 mm Track width 3345 mm Track height 650 mm 2x machine cutting torch with cutting table

Condition: good (used), Year of construction: 2020, machine/vehicle number: 2022, Offer 24542 Contact Belt Grinding Machine – Centerless Cylindrical Grinding Machine with Extraction Technical Specifications: - Workpiece diameter: 85 – 170 mm - Feed speed: 0 – 7 m/min - Abrasive belt dimensions approx.: 4000 x 75 / 100 mm Lhedpfsvb Uquox Ag Rsp - Pneumatic belt tensioning - Possible contact wheel diameter up to approx. 400 mm - Possible drive wheel diameter: 100 – 280 mm - Pendulum-mounted, pneumatically adjustable contact wheel / grinding roller - Extraction pipe for connection to central extraction system - Infinitely variable abrasive belt speeds - Frequency converter with electronic brake - Motorized grinding attachment for external tube grinding - With pneumatic foot switch for opening and closing - Compressed air connection: 6 bar - Speed: 1400 / 2800 rpm - Drive: 400 V / 3.2 / 4.0 kW - Space requirement approx.: W 500 x H 2050 x D 900 mm - Weight approx.: 250 kg - Left and right supports with rollers - Separate motorized dust extraction unit, make MIX, type SFCV 280 A, year 2010

Condition: good (used), Year of construction: 2005, For sale: Lhodpfouii A Aex Ag Rop 1 used spot welding machine incl. cooling system Manufacturer: Tecna Model: 6125 Year of manufacture: 2005 Hyfra cooling VWK 50-1-S, year 2006 Documentation included The machines can be inspected at our warehouse in 09599 Freiberg.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, CNC punching machine with only approx. 11,600 operating hours, immediately available Manufacturer: TRUMPF Model: TruPunch 3000 - 1600(S11) Year of manufacture: 11/2013 Operating hours, approx.: only 11,600 h Sheet format: Large format TECHNICAL DATA: Working area: 3,000 x 1,500 mm, with repositioning Max. workpiece weight: 160 kg Punching and hold-down force: 180 kN and 20 kN Max. stroke rate: Punching: 800 1/min, Marking: 2,500 1/min Dimensions (L x W x H): 6,500 x 6,203 x 2,252 mm SPECIAL EQUIPMENT: - MultiTool function - MultiShear function - Marking / Fast embossing function - Deburring and roller technology - Adaptive stroke calibration - Punch slug breakage monitoring - Lowerable die - Spray degreasing for dies with fill level monitoring - Additional clamp - Sheet collision detection - Stop pin, outer side, left position outside STANDARD EQUIPMENT: Machine: - Working area 3,000 x 1,500 mm (with repositioning) - Rigid C-frame for easy access - Coordinate guidance for high-precision machining - Linear magazine with 17 tool stations and 3 clamps - Drives with maintenance-free 3-phase servo motors - Repositioning device with programmable hold-down - Ball tables - Parts chute - Programmable support table - Good parts container - Scrap container Lodpfsxn Tywox Ag Rehp - Automatic shut-off mechanism - Transport and installation device - Stop pin (right side, inside) - Foot switch for closing the clamps Punching head: - Servo-electric punching head - Rotatable single-tool adapter - Programmable hold-down - Tool length compensation - Spray degreasing for punch - Punch slug extraction - Forming - Manually adjustable pressing force - Stroke counter for punch - Monitoring of fill level for thread-cutting and tool lubrication Control: - Control system based on Bosch MTX CMP 70 - Operating panel with 17" touchscreen - NC program management - Integrated technology data - Teleservice via Internet - Integrated e-shop - Production planning - Programming - Advanced workshop programming - Data transmission - USB interface Safety: CE marking (ex works) Dual-beam light barriers

Condition: excellent (used), Year of construction: 2016, Centre height 200 mm Maximum swing over bed 400 mm Maximum swing over cross slide 235 mm Swing in gap 550 mm Bed width 320 mm Distance between centres 1000 mm Bar capacity 50 mm Lhsdpsxbzpmefx Ag Rep Spindle bore 52 mm Number of spindle speeds 12 Speed range 50–2240 rpm Number of feeds 80 Weight 1700 kg

Condition: new, Year of construction: 2024, load capacity: 300 kg, Protec KT 300 H welding turntable, 170/400 special version Horizontal load 300 kg, tilted 150 kg Power consumption 220 V, 50 Hz Table diameter 450mm Hollow shaft diameter 170mm Lhodpfxjrypmgj Ag Rjp Table height 500mm Welding current transmission 400 A Quick-action chuck diameter 300mm, surcharge 550.-€ Quick-action chuck diameter 400mm, surcharge 750.-€ Crank gear motor 0 - 90° stepless adjustment Infinitely variable speed 0.01 to approx. 5 rpm. incl. foot remote control Digital display with welding time limiter (if required)

Year of construction: 1992, condition: good (used), machine/vehicle number: 29-0288, Offer 04612 Technical data: - Cutting range at 90° round 260 mm - flat 450 x 240 mm - Cutting range at 45° round 230 mm - flat 240 x 200 mm - Machine is mounted on original turnstile - saw band dimension 3660 x 25 x 0,9 mm - cutting speeds 20 / 35 / 50 / 70 m/min - Hydr. lifting + lowering of the saw frame - cutting pressure infinitely variable 0 - 10 m/min - Total drive power 400 V / 0,8 kW - Coolant device - space requirement approx. W 2100 x H 1200 x D 1000 mm - weight approx. 500 kg Lhjdpjgin Ndefx Ag Rjp