Vertical machining center

TAKUMI V18A

Condition: ready for operation (used), Year of construction: 1998, operating hours: 26,000 h, functionality: fully functional, machine/vehicle number: J0124, travel distance X-axis: 1,800 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 750 mm, controller model: Heidenhain iTNC 426, rotational speed (max.): 6,000 rpm, TECHNICAL DETAILS Travel range X-axis: 1,800 mm Travel range Y-axis: 850 mm Travel range Z-axis: 750 mm Spindle nose to table distance range: 200 mm - 950 mm Spindle center to column distance: 920 mm Table dimensions X: 2,000 mm Table dimensions Y: 800 mm Max. table load: 2,200 kg Tool interface: SK50 Magazine capacity: 30 Spindle speed: 6,000 rpm Feed rate: 5 m/min Rapid traverse: 12 m/min MACHINE DETAILS Control system: Heidenhain iTNC 426 Dimensions & Weight Dimensions (L x W x H): approx. 5,700 x 3,850 x 3,350 mm Weight: approx. 16,500 kg Operating Hours Total operating hours: approx. 51,000 h Spindle operating hours: approx. 26,000 h Dsdpfxozdpqwe Ac Hsck EQUIPMENT 4th axis installed as a rotary table Documentation/Manual Spindle speed infinitely adjustable Chip conveyor Coolant system Vices

Year of construction: 1980, condition: good (used), A used, very well-maintained cycle-controlled lathe from Weisser Heilbronn with a SIEMENS control system. Distance between centers 2000 mm Center height 295 mm Swinging diameter over bed 600 mm Swinging diameter over cross slide 260 mm Swinging diameter in the crotch 800 mm Total length of the crotch 375 mm Bed width 450 mm Travel of X-axis 350 mm Travel of Z-axis 1850 mm Spindle nose DIN 55022, size 8 Spindle speed, number 18, 14 – 1400 rpm Spindle bore 71.5 mm Diameter of front bearing 110 mm Feed range 0.01 – 40.95 mm/rev Rapid traverse 8 m/min DC drive 15 kW 400V 50Hz Max. permissible torque on the spindle 2500 Nm Tailstock quill 80 mm Quill stroke 250 mm Internal taper in quill MK 5 Length x width x height Machine weight 5500 kg Accessories: Tailstock Pneumatic three-jaw chuck with replaceable jaws, 315 mm Quick-change tool holder "MULTIFIX" in front of the center, size "C" Four-position turret behind the center Tool holder Coolant system Follow rest, pneumatically actuated Technical data and dimensions: Subject to change without notice. Video conference via WhatsApp possible after scheduling an appointment. Dedpfx Aogyy I Ajc Hjck

Condition: reconditioned (used), Year of construction: 2006, travel distance X-axis: 5,500 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 15 rpm, table width: 1,200 mm, table length: 6,000 mm, RepairFIT by Dornhöfer The difference. Including installation & commissioning! Machine year of manufacture: 2006 Capacities / Travel: Longitudinal (X): mm 5,500 Vertical (Y): mm 1,400 Lateral (Z): mm 1,000 Work table: Length: mm 6,000 Width: mm 1,200 Number of T-slots on the table surface: pieces 12 Width of T-slots: mm 22 Distance between slots: mm 100 Max. workpiece weight: kg 13,500 NC rotary table: Position: Right, flush integrated into the table surface Clamping surface: Ø mm 1,000 Positioning accuracy: ° 360x0.001 Max. workpiece weight: kg 3,500 Number of T-slots: pieces 9 Size of T-slots: mm 22 Distance of T-slots: mm 100 Paint finish: Dsdpfx Ajy Tkgbec Hsck RAL 7035 light gray / RAL 5011 steel blue Tool interface: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power: 100% ED KW28 Spindle speed range: Spindle speed: min-1 15 - 5,000 Torque: Nm 815 Feeds: X, Y and Z axis mm/min 2 – 10,000 Max. rapid traverse speed: X, Y and Z axis mm/min 25,000 Max. feed force: N 10,000 Footprint FLC6000: m (approx.) 11.0 x 5.6 Overall height: m (approx.) 3.5 Weight: kg approx. 35,000 HEIDENHAIN iTNC 530 HSCI Automatic MTE milling head, diagonal Automatic tool changer Chip conveyor Coolant system with 70 bar & (IKZ) RepairFIT is our proven offer for a profitable entry into our product lines. The machines available in this line are procured by us after a strict selection process and undergo a thorough inspection (deep-dive check). After intensive cleaning, the identified obvious defects and errors were professionally repaired by our expert service team.

Condition: excellent (used), Year of construction: 2008, operating hours: 40,255 h, functionality: fully functional, For sale is a DMG DECKEL MAHO DMF 220 linear, a 5-axis universal travelling-column machining center. The machine was built in 2008 and was modernized / totally retrofitted in 2022 with Siemens Sinumerik 840D Solution Line control. Equipped with 5-axis simultaneous machining license, Siemens Sinamics drive technology, Siemens OP15 Black Operator Panel, MCP control panel and electronic handwheel. Technical data: Manufacturer: DMG DECKEL MAHO Type: DMF 220 linear Machine type: 5-axis universal machining center / travelling-column machining center Year of manufacture: 2008 Control: Siemens Sinumerik 840D Solution Line Modernization / Total Retrofit: Siemens CNC / drive modernization in 2022 5-axis simultaneous operation: License available Serial number: 15115223244 Dedpfxsyuzg Hs Ac Hjck Machine number: 2499093 Travel X: 2,200 mm Travel Y: 560 mm Travel Z: 720 mm Tool taper: SK 40 Table load: 2,500 kg Main spindle speed range: 20 - 14,000 rpm Connected load: 80 kVA Max. rated current: 115 A Fuse protection: 125 A Supply voltage: 400 V Frequency: 50 Hz AC control voltage: 230 V DC control voltage: 24 V Power-on hours: approx. 40,255 h Spindle / working hours: approx. 13,082 h CNC / drive technology: X-axis: Siemens Sinamics 160 A, 2 x SMC20 encoder module Y-axis: Siemens Sinamics 50 A, 2 x SMC20 encoder module Z-axis: Siemens Sinamics 80 A, 2 x SMC20 encoder module B-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module A-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module Spindle axis: Siemens Sinamics 26 kW, 2 x SMC20 encoder module Operator panel: Siemens OP15 Black Operator Panel MCP control panel: Siemens Electronic handwheel: Siemens Magazine technology: Magazine A: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine B: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine C: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Software / licenses: 5-axis simultaneous machining license Axis licenses Operator software license Equipment: Integrated swivelling table / trunnion-type table setup Paper band filter unit Coolant / filter unit Electrical cabinet Full enclosure Working area lighting Siemens control panel Condition: Machine in well-maintained condition Modernized Siemens control and drive technology 5-axis simultaneous machining available

Condition: good (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 800 mm, table load: 12,000 kg, total height: 3,900 mm, total length: 7,200 mm, total width: 5,200 mm, table length: 1,800 mm, table width: 1,600 mm, feed rate X-axis: 8,000 m/min, feed rate Y-axis: 8,000 m/min, feed rate Z-axis: 8,000 m/min, rotational speed (max.): 2,000 rpm, Table type boring mill TOS VARNSDORF - WHN 13 CNC MACH-ID 9612 Dedpfx Aey H Dahsc Hjck Make: TOS VARNSDORF Type: WHN 13 CNC Control: Heidenhain TNC415 X - Travel: 3500mm Y - Travel: 2000mm Z - Travel: 800mm W - Travel: 1000mm Table Length: 1800mm Table Width: 1600mm Table load: 12 Speeds / ranges:2000Rpm Power: 37kW Spindle Taper: ISO50ISO/Bt/Mk Feed rate X-Axis:8000mm/min. Feed rate Y-Axis:8000mm/min. Feed rate Z-Axis:8000mm/min. Feed rate W-Axis:8000mm/min. Length: 7200mm Width: 5200mm Height: 3900mm Weight: 34500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1973, spindle diameter 130 mm x-travel 3000 mm y-travel 2000 mm total power requirement 4,5 kW weight of the machine ca. 30 t Spindle Ø 130 mm Spindle taper SK 50 Working range: X = column, longitudinal 3,000 mm Y = headstock, vertical 2,000 mm Z = spindle stroke 1,000 mm Lower table 3,300 x 2.400 mm Max. weight on table 10 tons/m² Min./ max position of work spindle above table 770 / 2,770 mm Feeds 0.9 - 2,000 mm/min Quick feed for headstock and column 5,000 mm/min Quill feed 0.5 - 1,200 mm/min Speed range, partially infinitely variable 4.5 - 1,250 rpm Weight, approx. 30,000 kg Accessories / Special Features * HEIDENHAIN Digital Display for 3 axes. * Hardened guideways. * Ball screw spindles. * Infinitely variable spindle speeds and feeds. Feeds can be individually driven with motor. * Moving operating platform. * Hanging control panel. * Manual operating control. * Platform. * Hydrostatics in the column displacement. * Mounting plate 3,200 x 2,500 mm, planed, with t-slots. * Top table approx. 1,400 x 2,600 x height 900 mm, one face is handled. * Hydraulic clamping of column and slides. * Motor driven tool clamp. Dsdpfet Hwt Sjx Ac Hsck * Lots of accessories, including tool holders with and without tools, separate chip extractor, clamping aids, 1 angle plate, and other plates. Lots of other accessories. This is a strong machine which is very suitable for heavy cuts and therefore ideal for the machine tool industry and for tool manufacturers. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Thank you for your interest. We have other horizontal borers on stock. Please let us know what you need.

Year of construction: 1988, condition: ready for operation (used), Travel X/Y/Z: 1500mm/800mm/660mm, spindle speed: 10000rpm, table dimensions X/Y: 1740mm/750mm, tool capacity: 30, taper type: BT50, control: Mazatrol M-32, weight: approx. 11000kg. Dcedpjtpp H Nsfx Ac Hsk

Condition: excellent (used), MECOF AGILE CS 500 TNC 640 Boring Mill in technically flawless condition Technical Data: - Spindle taper: ISO 50 - Longitudinal travel: 6000 mm - Cross travel: 1250 mm - Vertical travel: 1700 mm - Table size: 7300×1090 + (2 CUBI 1520×1000) mm - Spindle speed: 4000 rpm - CNC model: fidia CXR Dcedpfx Aey Rzklsc Hjk - Tool changer capacity: PICK UP UTENSILI 10 POSITIONS (5 ISO 50 – 5 HSK 50 E) - Power: 30 kW spindle The MECOF AGILE CS 500 TNC 640 offers a wide range of features and technical specifications to meet the most diverse requirements. With a longitudinal travel of 6000 mm and a cross travel of 1250 mm, it enables precise drilling and milling operations on large workpieces. The 1700 mm vertical travel ensures maximum flexibility and allows for machining at various angles. The table has a size of 7300×1090 mm and is supplemented by two additional cubes measuring 1520×1000 mm each. In this case, the machine has been installed at floor level. The boring mill is equipped with a powerful 30 kW spindle motor with a maximum spindle speed of 4000 rpm. The fidia CXR CNC control provides precise programming and easy operation. The tool changer with 10 positions (5 ISO 50 – 5 HSK 50 E) allows for fast tool changes to optimize your production process. The machine has been regularly serviced and is in technically excellent condition. It can be inspected under power or during ongoing production. Extensive accessories included. Additional pictures available. Dismantling, removal, shipping, and reinstallation can be organized upon request.

Condition: used, Technical details: spindle diameter: 120 mm x-travel: 1250 mm y-travel: 1250 mm z-travel: 800 mm W-axis (spindle longitudinal): 600 mm Speed of boring spindles: 1- 2000 U/min. spindle taper ISO: 50 Dcodpfoxt El Aex Ac Hek table surface area: 1000 x 1000 mm total power requirement: 55 kW weight of the machine ca.: 18 t with CNC HEIDENHAIN TNC 426 autom. toolchnager 40-pockets coolant attachment *

Condition: used, machine/vehicle number: LC600, Technical Specifications & Performance DataThis used bottling line is configured for high-efficiency beverage production in 0.5L PET bottles. Optimized for sparkling and still water, the line delivers reliable throughput with robust end-of-line packaging and palletizing. The configuration is non-combi, featuring a separate blow molding machine upstream of the filling monoblock section, ideal for flexible maintenance and line balancing.Production speed: 25,000 bphBottle formats: Compatible with 0.5L bottle formatContainers: Designed for PET bottle handlingConfiguration: Non-combi (separate blow molding and filling)Main components and years: Sidel Universal SBO 14 blow molder (2007), Sarcmi 70-10 ISO Filling Monoblock (1988 – Overhauled in 2025), Labeling machine Sarcmi (2011), Shrink wrapper Zambelli (2004), Handle applicator (2004), Palletizer ACMI double-head (1992).Advanced Automation & Control SystemsThe line benefits from a modernized conveyor and control system, with the conveyor management and electrical panels refurbished in 2010–2011. This upgrade improves synchronization between modules, enhances safety interlocks, and supports stable high-speed performance across forming, filling monoblock, labeling, and packaging stations.Refurbished conveyor control and electrical panels in 2010–2011Integrated interlocks for safe operation at high throughputNon-combi architecture simplifies maintenance and phased upgradesProduction Line Integration CapabilitiesEngineered as a complete production solution for water bottling, this second-hand bottling equipment integrates seamlessly from blow molding to end-of-line palletizing. The non-combi layout enables independent operation and optimization of the blow molder and filling monoblock, facilitating changeovers and maintenance without halting the entire line.Inline flow: Blow molding → Filling Monoblock → Labeling → Shrink wrapping → Handle application → PalletizingConveyor system reworked for reliable accumulation and transferSuitable for sparkling and still water applications in PETMachine Condition & Maintenance HistoryThis used bottling line has benefited from targeted upgrades to the conveyor management and electrical panels completed in 2010–2011. A key highlight of the line is the Sarcmi 70-10 ISO Filling Monoblock, which, despite its original 1988 manufacture, has been completely overhauled in 2025 to ensure peak operational reliability. The line is described in working configuration and is presented as a ready-to-run second-hand industrial packaging solution.Filling Monoblock Sarcmi 70-10 ISO: Overhauled in 2025Conveyors and electrical panel management refurbished: 2010–2011Well-known OEM components across the lineReady for operation with existing 0.5L PET water setupOperational Performance & VersatilityOptimized for beverage production with a focus on water, the line manages both still and carbonated profiles effectively. The Si... Dcsdpoyk E Srsfx Ac Hjk