Tote Bin Lifter Tipper

Syspal H2-1019

Condition: good (used), Year of construction: 2010, LZ-Lathe Fabr.JET Type :GHB-1330 Bj.2010 with 3 ash digital indicator, 3 jaws lathe chuck DM 160 mm tool holder Multifix size A, 2 steady rests coolant device. Turning diameter overbed: 330 mm Gkjdjqwgzqspfx Ag Dof Turning diameter over face: 197 mm Center width: 750 mm Spindle speeds: 70-2000 rpm spindle bore : 38 mm Machine in good condition from the training workshop Machine documentation available .

Year of construction: 1985, condition: good (used), FILLETING LINE FOR FISH Item: D-1640-Baader-FilletingLine Manufacturer: Baader Consist of Model: 478 Year of manufacture: 1985 Has been used for sardines Gkodpfx Aged Dtuhj Def Baader in feed line consisting of: Baader mobile automatic 5 lane infeeder, type: 478 . Baader mobile automatic feeder, type: 478, year of construction: 1985, 400 V, 3 Ph, 50 Hz, 5 A, 5 lanes, lane width: (5x) 40 mm, total dimensions: 3350 mm x 1300 mm x 2450 mm.

Year of construction: 2001, condition: excellent (used), Westfalia decanter Manufacturer: GEA Westfalia Separator AG Type: CA 365-010 Year of manufacture: 1978 bowl speed: 3.300 rpm Commissioning until: 2004 Field of application: In the production of base oils for the removal of solid particles. Decanters were taken out of operation after a production changeover in 2004 and is therefore fully functional. Goded Rwwxepfx Ag Dskf

Condition: new, NEW UNLOADER BOX, Length 4200 outside, width 2280 outside, tailboard height 600, with flagged rear tailboard, 4 mm. platform, with aluminum TR30 split tailboards Gedjrwl Nvopfx Ag Dekf

Condition: used, Used Alfa Laval model CT-6 "Centritherm" stainless steel contact parts centrifugal evaporation unit. Approximate water evaporation capacity 800 kg/hr. Evaporation unit consists of: 1) CT-6 Centritherm evaporator mounted on skid 2) Alfa Laval model P2-HL plate heat exchanger/condenser 3) Control panel 4) Duplex filter 5) Feed pump model 6) Concentrate pump model 7) Condensate centrifugal pump 8) Vacuum pump Pompe Travaini model TRMB 40-150/F 9) Flash cooler 10) Piping Gjdpfxjlc Dwvo Ag Djkf 11) Tools for lifting cones and the bowl 12) Original technical documentation in German.

Condition: new, Year of construction: 2021, Hiwell batter mixer II Hiwell DJJ100-II batter mixer utilizes ingenious mixer to evenly combine water and batter. This stainless steel mixer is applicable for high viscosity batters such as Tempura batter. Advantages 1. Our parry battering machine involves utilization of cutting-edge control system, thus realizing repeatable operation cycles of high-speed mixing, low speed mixing and alarm on application of batter. Therefore, batter is prevented from sedimentation. Godpfxog Unrps Ag Dokf 2. Mixing tank in this fruit battering equipment is endowed with separation layer, which is aimed to keep batter temperature between 10-20℃ by ice or cold medium. 3. Our batter mixing equipment comes with batter output pump, which offers excellent connectivity to battering equipment to form batter feeder. 4. Thanks to reliable protection system and Siemens electronic components, thisfruit processing equipment is operator and maintenance friendly. 5. The entire batter mixer is manufactured with quality stainless steel to meet HACCP standards. 6. Optional battering dosing device is available for more accurate viscosity control.

Condition: good (used), Multivac thermoformer currently setup to produce ‘hotel style’ jam packs, 14g and 20g. 32 portions per cycle. Could also be used to produce ice cubes, sauce packs, ketchup, stock etc. Can also be supplied as a line with M&P 32 head filler and end of line tray wrapper if required (at extra cost). Gkedpfx Ajtp N Ddsg Djf

Condition: excellent (used), machine/vehicle number: 040501, Henneken C2 vacuum tumbler in lovely condition. 3,650 litres, front and rear doors. Dimensions 2.55m wide, 2.04m long, 2.28m high. Also available (at extra cost) Henneken tote bin loader to match. Gsdpfoqwhiiox Ag Dekf

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, POLY-CLIP RCA ID.NO. 2708 Poly-Clip mod RCA automatic double clip machine handles calibers from 25 mm - 55 mm both natural casing & collagen casing. Pipe that comes with is 24 mm + associated brake. Dimensions 100 x 80 cm Height 195 cm. Gsdjtrf Egepfx Ag Djkf

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm Gkodpfxjqt Dmyj Ag Djf - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.