Injection mold

SUNRAY

Condition: used, Year of construction: 1998, Automatic PET bottle blowing machine Manufacturer: SIDEL Type: SBO 16/16 S1 Year of manufacture 1998 Djdpeutni Rjfx Aiiecp Capacity: 16,000 for 1.5 L bottles and up to 19,000 bph for 0.5 L bottles Installed power: 347 kW Includes 1.5 L moulds Preform feeder Chiller cooling unit Technical condition: used machine, functional until dismantled. The machine is currently dismantled, assembled in elements and prepared for transport. Full and original technical documentation.

Condition: good (used), Year of construction: 2004, Peripheral devices Brand: Tool - Temp Type: TT - 157E Available: 14 pieces Dedpfx Aijh Hbpwoiscp

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2198535, overall weight: 2,409 kg, fuel type: diesel, tank capacity: 600 l, color: red, power: 160 kW (217.54 HP), output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 160 kW (217.54 HP), nominal power (apparent): 220 kVA, continuous power: 160 kW (217.54 HP), continuous power (apparent): 220 kVA, total length: 3,300 mm, total width: 1,200 mm, total height: 1,970 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: FPT/Iveco, type of cooling: water, fuel consumption (combined): 42.1 l/100km, fuel consumption (urban): 24 l/100km, fuel consumption (extra-urban): 32.87 l/100km, fuel: diesel, fuel tank capacity: 600 l, battery capacity: 100 Ah, battery voltage: 12 V, input voltage: 12 V, input frequency: 50 Hz, input current: 32 A, operating temperature: 25 °C, ambient temperature (min.): -25 °C, ambient temperature (max.): 45 °C, control cabinet height: 1,970 mm, control cabinet length: 3,300 mm, control cabinet width: 1,200 mm, protection type (IP code): IP65, rotational speed (min.): 1,500 rpm, temperature: 25 °C, type of input current: three-phase, warranty duration: 12 months, Equipment: documentation/manual, mobile diesel tank, De Bredenoord 200 KVA generator is een betrouwbare en veelzijdige oplossing voor tijdelijke en langdurige stroombehoeften in diverse omgevingen. Het aggregaat is ideaal voor mobiel gebruik en voldoet aan de emissie-eisen van Stage-V. De efficiënte PFT/Iveco motor, gecombineerd met een Stamford generator, levert uitstekende prestaties en lage operationele kosten. De generator is uitgevoerd in een geluidsisolerende omkasting die zorgt voor een minimale geluidsuitstoot, ideaal voor gebruik in geluidsgevoelige omgevingen (super silent). De kast is voorzien van dikke, oliebestendige geluidsisolatie en externe stekkerdozen met zekeringautomaten voor extra veiligheid. Met een brandstoftank van 600 liter heeft de generator een autonomie van maximaal 14 uur bij continu gebruik. Het systeem werkt op diesel, HVO of GTL brandstof, wat zorgt voor flexibele brandstofopties. Technische Specificaties: - Model: Bredenoord 200 KVA - Nom. vermogen: 220 KVA - Max. vermogen: 220 KVA - Motor: FPT/Iveco NEF67TM7 - Generator: Stamford borstelloze alternator (AVR) - Vermogen: 220 KVA - Voltage: 230/400 V, 50 Hz - Toerental: 1500 tpm - Geluidsniveau: 68 dB(A) op 7 meter - Brandstoftank: 600 liter - Autonomie: - 100% PRP: 14 uur - 70% PRP: 18 uur - Motorvermogen:160 KW - Batterijlader en motorverwarming: Standaard aanwezig - Control panel: Comap MRS16 (auto start/stop) - Afmetingen (L x B x H): 3.30 m x 1.20 m x 1.97 m - Gewicht: 2409 kg - Emissieklasse: Stage-V Brandstofverbruik: - 100% PRP: 42,1 L/h - 70% PRP: 32,87 L/h - 50% PRP: 24 L/h Opties: - Motorverwarming - Batterijlader - 3-weg brandstofkraan - XXL brandstoftank Geluidsdemping: De generator is ontworpen met geoptimaliseerde luchtinlaten en speciale isolatiematerialen die geluid minimaliseren. De geluidsisolatie is versterkt met wol van verschillende diktes om geluid over een breed frequentiespectrum te reduceren. Dit maakt het ideaal voor gebruik in geluidsgevoelige gebieden. Duurzaamheid: De omkasting is bestand tegen corrosie dankzij een verflaag die getest is voor meer dan 2000 uur (C5I-H). Dit zorgt voor een lange levensduur, zelfs in de meest uitdagende omstandigheden. Veiligheid: De generator is uitgerust met versterkte sloten en roestvrijstalen scharnieren. De deuren zijn ontworpen met een afgeschuinde hoek van 20 graden om waterophoping te voorkomen en oxidatie te minimaliseren. Dcodpfx Aiewf Nkcjiep Transport en Verplaatsing: De generator is gemakkelijk te verplaatsen dankzij versterkte hijsogen en stalen balken, die zorgen voor eenvoudig transport op bouwlocaties. Het ontwerp zorgt voor een stabiele en veilige verplaatsing van de generator zonder risico op schade. Klantspecifieke Aanpassingen: De Bredenoord 200 KVA generator is beschikbaar in verschillende uitvoeringen, van 20 KVA tot 600 KVA. Klantspecifieke aanpassingen zijn mogelijk, waardoor de generator kan worden aangepast aan specifieke eisen en toepassingen. Certificeringen: - CE-gecertificeerd - Europese makelij Toepassingsgebieden: De generator is geschikt voor diverse sectoren, waaronder de bouw, industrie en andere toepassingen waar betrouwbare en efficiënte stroomvoorziening vereist is.

Condition: used, Semi-automatic PET bottle blow molding machine Manufacturer: FERENC Dcjdpfx Aeugu E Reiisp Model: F-1400 Year of manufacture: 2006 Output: approx. 800 pcs/h Number of molds in the machine: 2 x 5 L (48 mm cap) Oven dimensions: - Length: 900 mm - Width: 900 mm - Height: 1200 mm Blow molder dimensions: - Length: 1800 mm - Width: 750 mm - Height: 2000 mm Set weight: 1200 kg Technical condition: used machine

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 9,300 h, load capacity: 3,500 kg, lifting height: 4,700 mm, free lift: 1,500 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,200 mm, gearing type: automatic, battery voltage: 80 V, battery weight: 1,580 kg, fork length: 1,150 mm, tire condition: 95 %, front tire type: superelastic tires (black), rear tire type: superelastic tires (black), empty load weight: 6,400 kg, total height: 2,200 mm, Equipment: cabin, full service history, lighting, pallet forks, sideshift, trailer coupling, For sale: Used Toyota electric forklift, type 8FBMT 35, year 2018, with triplex free lift mast! Overall height: 2.2 m Lift height: 4.7 m Dedpfx Aioxzr E Esiscp Load capacity: 3,500 kg Solid rubber tires, 95% Hydraulic sideshift Fork length: 115 cm Includes charger Both drive motors and the rear axle have already been overhauled on the forklift, and the battery has also been replaced! Forklift is immediately available! Forklift is ready for immediate use! Forklift can be inspected and test-driven at our premises! Transport can be organized on request!

Condition: used, Stretch blow molding machine by Etek ISBM line = Injection stretch blow molding Stretch blow molding machine for single-use PET bottles made from PET preforms Stretch blow molding machine for production using the rotary process Manufacturer: ETEK / GF-Industries, Type Supra 800 sv 1 Serial number: 22000225 Year of manufacture: 2012 Power: 90 kW Dcedpfx Aiekucxloijp Mains connection: 400 volts, 50 Hz Weight: approximately 6000 kg In like-new condition

Condition: like new (used), Year of construction: 2023, Technical Data: Maximum clamping force: 3,500 kN Maximum locking force: 3,850 kN Opening stroke: 725 mm Minimum mold installation height: 400 mm Maximum mold installation height: 900 mm (extended) Clamping plate dimensions (h x v): 1,168 x 1,144 mm Clear tie bar spacing (width x height): 830 x 830 mm Maximum mold weight: 6,600 kg Maximum weight on moving platen: 3,800 kg Maximum weight on fixed platen: 5,100 kg Ejector stroke: 250 mm Ejector force (increased): 100 kN Max. ejector speed: 270 mm Screw diameter: 60 mm Injection pressure: 2,426 bar Max. injection volume: 891 cm³ Max. injection speed: 160 mm/s Max. dosing stroke: 315 mm Max. nozzle stroke: 520 mm Nozzle immersion depth: 20 mm Back pressure over dosing stroke programmable Installed cylinder heating: 23.1 kW Material hopper capacity: 110 l Machine weight: approx. 21 t Accessories: Robot: Manufacturer: SEPRO ROBOTIQUE (France) Model: 5T35 2000/900/TE-1800 Year of manufacture: 2023 Stroke: 2,000 mm Speed: 3.5 m/s Horizontal demolding stroke Y-axis: 900 mm Vertical demolding stroke X-axis: 1,800 mm Robot console on fixed platen Gripper function R1 (C) axis pneumatic 0° - 90°, including quick-change plate Weight: 583 kg MuCell Integration: The special option includes: • Plasticizing cylinder with pneumatic shut-off nozzle without mixing element and without non-return valve; • Interface (communication, emergency stop interface); • Software with functional display pages for controlling the MuCell function; • Adapted nozzle guard; • Position-controlled high-speed screw (analog ZE388) Dcedpfjy Hmfyox Aiisp Conveyor belt: Width: 870 mm Usable width: 800 mm Length: 3,500 mm Height: 880 - 1,220 mm Load capacity: 38 kg/m² Belt speed: 5.7 m/min Number of frames: 2 Clear tunnel height: 500 mm This injection molding machine is fully equipped!! Condition: As new condition, only 5,290 operating hours.

Year of construction: 1998, condition: good (used), functionality: fully functional, machine/vehicle number: 12254 B521 860, Overheadcrane ± 10.500 mm x 12.500 kg Dcjdpfev Ip Egsx Aiiep

Condition: good (used), Year of construction: 1999, operating hours: 95,239 h, functionality: fully functional, machine/vehicle number: 173937, clamping force: 2,000 kN, screw diameter: 55 mm, clearance between the columns: 520 mm, mold height (min.): 250 mm, total length: 5,100 mm, total width: 1,800 mm, total height: 2,200 mm, overall weight: 6,630 kg, Equipment: documentation/manual, The machine ran perfectly until the last day before the new machine was delivered to us. The machine is therefore in good used condition. Due to a lack of space in the injection molding shop, the machine is being sold and is no longer powered. The pump / injection unit / clamping unit are sealed. The machine manual is available Videos of the machine are available Pump operating hours: 95239 Automatic operating hours: 86082 Repairs from recent years: Dsdpfx Asv D Nxlsiiecp Filter replaced annually 05/2024 Fan in the control cabinet replaced 07/2023 New valve for Y201 and Y210 nozzle forward/backward 02/2023 New keypad installed. Field with motor and heater 12/2022 Ejector sealed. Injection unit sealed including new piston

Condition: new, Year of construction: 2025, Delivery ex works Turkey Bending length (A): 3050 mm Press force: 170 tons Sheet thickness 42kgf / mm: 8 mm Sheet thickness 72kgf / mm: 4 mm Upper tool: 1260 Top Tool 85 ° Lower tool: 50, 35, 22, 16 Distance between columns (B): 2550 mm Forward speed: 130 mm / s Working speed: 8 mm / s Retraction speed: 120 mm / s Crowning: manual (CNC-motorized available for an extra charge) X-axis travel: 750 mm X-axis speed: 250 mm / s Backgauge fingers: 2 pieces Front support arms: 2 pieces Oil tank capacity: 180 liters Main motor power: 11 kW Stroke length (C): 265 mm Installation height (D): 450 mm Projection stand (E): 410 mm Table height (F): 870 mm Table width (G): 170 mm Length (L): 4200 mm Height (H): 2800 mm Width (W): 2200 mm Weight: approx. 7500 kg Dcsdjgu N Aljpfx Aiiop Cybelec Cybtouch 12 2D Graphic CNC control 3 axes (Y1, Y2, X) expandable with optional R+Z-Axis Eurostamp 2067 lower tool (V: 50, 35, 22, 16) Eurostamp 1260 upper tool 85 ° Narrow table All-steel welded construction Promecam quick clamping system CNC-controlled motorized backgauge (X: 750 mm) Adjustable backgauge fingers Inch and metric system can be selected Ground and chrome-plated cylinders Swiveling control panel Foot control with anti-panic stop & emergency shutdown Lateral protective grille (secured with limit switch) Light curtain on the back of the machine (900 mm) DSP laser finger protection system at the front (CE) BOSCH / REXROTH or HOERBIGER / HAWE hydraulic system BOSCH / REXROTH or ECKERLE hydraulic pump Slidable front support arms (2 pieces) Electronics unit from: SIEMENS, SCHNEIDER, DELTA, ABB, OMRON 380 V 50 Hz Painting: RAL 7035, RAL 5015 Optional special accessories available at an additional cost: -CNC-controlled R-axis (250 mm) -CNC motorized crowning -Servo driven motors backgauge system for X + R axis (Mitsubishi) -Painting in special colors on customer request Documentation in German or English CE conformity