Year of construction: 2021, condition: new, Cantilever rack, one-sided, 3m height, 1.20m arms, 500kg per arm - new -: Price ex location including loading! 1 shelf unit with 4 stands 1.833.- € (net)! Price for transport within Germany (excluding islands): € 500 (net)! Of course, you can also build longer or shorter shelving units from them by omitting or buying additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: Shelf uprights on one side approx. 3,000 mm high, hot-dip galvanized, IPE 160 Leg and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity at a load center of 600mm 500 kg per arm / 2250 kg per stand Itsdpsddmpvefx Aktjg with 4 uprights per arm level 4 x 500 kg = 2,000 kg, arms IPE 80, with longitudinal and diagonal bracing e = 1300 mm, the standard is 1.30 m - so if you do not have any deviating information, we will deliver the rack with a center distance of 1.30 m. Other center distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard delivery, the length of a row of shelves with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without ground anchors. Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us!

Year of construction: 2021, condition: new, Cantilever rack, double-sided, 5.18m height, 1.20m arms, 860kg per arm - NEW -: Price ex location including loading! Ijdpjddmqyjfx Aktotg 1 shelf unit with 4 stands € 4.185 (net)! Price for transport within Germany (excluding islands): € 550 (net)! Of course, you can also build longer or shorter shelving units from them by omitting or buying additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: 4 uprights, double-sided, approx. 5.18 m high, hot-dip galvanized IPE 180/100 each with 2 x 3 adjustable Arms 1.20 m, 860kg load capacity per arm with bandages approx. 1.30 m Shelf uprights on both sides approx. 5180mm high, hot-dip galvanized Leg and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity with a load center of 600 mm 860 kg per arm / 2600 kg per stand side with longitudinal and diagonal bracing e = 1300 mm, the standard is 1.30 m - so if you do not have any deviating information, we will deliver the rack with a center distance of 1.30 m. Other center distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard delivery, the length of a row of shelves with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without ground anchors. Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us!

Year of construction: 2021, condition: new, Cantilever rack, one-sided, 4.16m height, 1.20m arms, 750kg per arm - new -: Price ex location including loading! 1 shelf unit with 4 stands € 2.300 (net)! Ijdpfx Ajddmp Ujktotg Price for transport within Germany (excluding islands): € 550 (net)! Of course, you can also build longer or shorter shelving units from them by omitting or buying additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: Arms: IPE 100 Frame: IPE 160 Shelf uprights on one side approx. 4160 mm high, hot-dip galvanized Leg and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity at load center of 600 mm 750 kg per arm / 2250 kg per stand with 4 stands per arm level 4 x 750 kg = 3,000 kg with longitudinal and diagonal bracing e = 1300 mm, the standard is 1.30 m - so if you do not have any deviating information, we will deliver the rack with a center distance of 1.30 m. Other center distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard delivery, the length of a row of shelves with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without ground anchors. Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us!

Year of construction: 2021, condition: new, Cantilever rack, single sided, 3m height, 1.20m arms, 750kg per arm - New - : Price ex location incl. loading! 1 racking unit with 4 uprights 1.988.-€ (net)! Surcharge for cantilevers with deflectors for this rack: 40.-€ Transport costs within D (without islands): 430.-€ (net)! Of course they can also build longer or shorter shelf units from it by omitting or buying more frames (or also by different axle distances), this example with 4 frames is only the most common shelf solution!!! A cantilever racking system, hot-dip galvanized, consisting of: Shelf uprights one-sided approx. 3,000 mm high, hot-dip galvanized, IPE 160 base and arm depth 1200 mm with 3 height adjustable shelf arms each load capacity at load center 600mm 750 kg per arm / 2250 kg per upright with 4 uprights per arm level 4 x 750 kg = 3.000 kg, arms IPE 100, with longitudinal and diagonal bracing e = 1300 mm, standard is 1.30m - so if you do not specify otherwise we deliver the rack with a center distance of 1.30m. Other center distances are possible e.g. 1m, 1,25m against small surcharge also 1,50m or special dimensions! As a standard delivery, the length of a shelf row with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without floor anchors. Itededdmp Aopfx Aktog Other configurations (frame height, arm lengths, arm types etc.) selectable! Please contact us!

Year of construction: 2021, condition: new, The prices mentioned in this advertisement are the prices as of mid-2021. Iedpfjddmr Nox Aktstg Due to the current international situation, steel and transport prices are rising almost daily. The availability of steel raw material is tight and currently unpredictable. Therefore, we ask you to inquire the current prices and availabilities! We will be pleased to submit you a current offer! Cantilever rack, double-sided, 4.16m height, 1.20m arms, 500kg per arm - NEW - : Price ex location incl. loading! 1 racking unit with 4 uprights 2.395.-€ (net)! Price transport within D (without islands): 425.-€ (net)! Of course you can also build longer or shorter shelf units from it by omitting or buying more frames (or also by different axle distances), this example with 4 frames is only the most common shelf solution!!! A cantilever racking system, hot-dip galvanized, consisting of: 4 shelf uprights double-sided approx. 4.16m high, hot-dip galvanized IPE 160 / 80 with 2x3 adjustable arms each 1,20m, 500kg load capacity per arm with bracings approx. 1,30 m Shelf uprights two-sided approx. 4160mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 height adjustable shelf arms each load capacity at load center 600 mm 500 kg per arm / 2250kg per upright side with longitudinal and diagonal bracing e = 1300mm, standard is 1,30m. Other standard lengths available from stock: 1m / 1,25m / 1,50m / 1,70m / 1,90m! From the length of 1.50m is a small surcharge to the above price! Special dimensions (a

Condition: good (used), Year of construction: 2008, approx. 150 bays shelving racks, Dexion, frame height 2.10m, depth 40 and 50cm with many shelves - second-hand - : Price ex location: 7.500.- € (net), dismantled, packed and loaded! Manufacturer: Dexion Type: HI-280 Year of construction: 2008 Frame height: 2,10m Frame depth: 50cm = 155 pieces Frame depth: 40cm = 16 pieces Frame: open Shelf width: 0.95m Depth 50cm = 872 pieces Depth 40cm = 164 pieces Adjustment grid: every 25mm Itsdpfx Asrvi A Hektjg Shelf load: 150kg Bay load: 1,700kg Condition: good Available: immediately Location: 35463 Fernwald-Steinbach

Condition: good (used), Year of construction: 2016, 134 units, side protection / frame protection / impact protection / guardrail for pallet racking, single or double rows, Nedcon - used - : Price ex location: €95 / unit (net), dismantled, packaged and loaded! Manufacturer: Nedcon Model: Set Flank protection sigma 135deg Year of manufacture: 2016 / 2019 Type 1 (for single row): 6 units available Side protection sigma 135° L=1100mm Set Flank protection sigma 135deg L=1100 Length: 120cm Height: 40cm Depth: approx. 22cm Weight: approx. 31kg Original price: approx. €205 (net) / unit Type 2 (for double rows): Ijdpfx Akjy Aixustotg 124 units available Side protection sigma 135° L=2400mm Set Flank protection sigma 135deg L=2400 Length: 243cm Height: 40cm Depth: approx. 22cm Weight: approx. 41kg Original price: approx. €227 (net) / unit Condition: good – very good Available: immediately Location: Augsburg

Condition: excellent (used), Year of construction: 2024, 100 mesh shelves, 1 to. / pallet space, for pallet racking 1.20 m deep - New - : Price per piece from location: 20.- € (net)! Only complete purchase! Manufacturer: MantaMESH Type: MantaMESH Year of manufacture: 2024 Condition: very good Available: immediately Location: 58540 Meinerzhagen ANSI MH 26.2 - 2017 compliant Performance independent of the shelf beams Uniformly distributed load (UDL) (kg) 1000 Permissible deflection (mm) 7.3 Load at structural failure (kg) 2000 Characteristics ANSI MH 26.2 - 2017 compliant Made in Germany Pre-galvanized, seamed beams SafeEDGE® on grilles and joists Grille has over 70% open area EU Design Registration No. 002435099-0003 Specifications Beam type Box 50 Box 50 Itjdpfx Aksttv Tgstog Shelf depth (mm) 1200 Grid depth (mm) 1202 Grid width (mm) 879 Top wire spacing (mm) 25 Bottom wire spacing (mm) 100 Top wire Ø (mm) 4 Bottom wire Ø (mm) 5 Thickness of bottom beams (mm) 1.2 Number of beams 5 Pre-galvanized Pre-galvanized Weight (kg) 12.24 Front side Bending (mm) 30 Bending type External Bending direction downwards Rear side Bend (mm) 30 External bend type Bending direction downwards

Condition: good (used), Approx. 1,400 shelving units, Tixit boltless shelving, shelf widths of 1.30m and 1m, depth 0.60m, frame height 2.40m and 4.80m – used – : Price ex location (net), dismantled, packed, and loaded. Frame height: Approx. 2.40m with 5 shelves: Min. 20 units: €79 / unit Min. 100 units: €69 / unit Approx. 4.80m with 10 shelves: Min. 20 units: €149 / unit Min. 100 units: €129 / unit Manufacturer: Tixit Iodpfextapvex Aktjtg Type: Boltless system Year of manufacture: unknown Frame height: approx. 2.40m and 4.80m Frame width: approx. 3cm Shelf load capacity: 100kg Unit bay load: unknown, but since the material comes from a multi-story installation, bay load should be relatively high. Bay width / shelf width: 1.30m and 1m, mainly 1.30m Bay depth / shelf depth: 60cm Shelf height: approx. 3cm Side frames: open Available: approx. 800 frames at height 4.80m or approx. 1,600 frames at height 2.40m Condition: Good, as the material comes from a multi-story installation Available: Immediately Location: Warehouse in Niedernberg, near Aschaffenburg

Condition: excellent (used), Year of construction: 2019, Pallet flow rack, Feralco, max. 1,200 kg per pallet, up to 640 pallet positions for Euro pallets and American pallets – used -: Price ex works: €59,500 (net), plus dismantling, etc.! Itsdpoxdx Dyofx Aktsg Manufacturer: Feralco Type: Dynamic / Pallet flow rack Year of manufacture: 2019 Capacity for approx. 640 pallet spaces System footprint: Width: approx. 14.22 m (bay width 2.70 m) Depth: approx. 20 m Frame height: approx. 10.65 m Height in current configuration with pallet height 2.30 m: max. 11.62 m Storage depth: 16 pallets deep 5 bays with 2 lanes each and 4 levels = 640 pallet spaces Suitable for Euro pallets and American pallets Pallet width: 800 and 1,100 mm, with load max. 1,200 mm Pallet depth: 1.20 m Pallet height max.: 2.30 m Max. pallet weight: 1,200 kg Incline: 4.5% Load per lane level: 20,000 kg Max. load per lane: 80,000 kg Condition: very good Available: immediately, still needs to be dismantled Location: Rhine/Main area

Condition: good (used), Year of construction: 2019, Pallet Racking, Nedcon, Height 2.50 – 2.70m, Beam Lengths 3m and 4m, 500kg per pallet, max. 5,600 pallet positions, - used - : Price ex location: only €65,000 (net), dismantled, packed, and loaded, for full purchase including numerous short beams and both short and long end-of-aisle protectors / guard rails (for double and single runs)! Price for partial quantities: Frames: €45 each Beams: 2m: €14 each 3m: €18 each 4m: €22 each Itjdpow D Ewvefx Aktog Manufacturer: Nedcon Type: Pallet Racking Year of manufacture: 2016 / 2019 Load capacity per pallet: 500kg Number of frames: approx. 900 units Most frames are equipped with upright protectors Frame height: 2.50m and 2.70m Frame depth: approx. 1.10m Beam lengths: 4m min. 624 units (beam height e.g. 12.5cm / support approx. 5cm) 3m min. 518 units (beam height e.g. 8.5cm / support approx. 4cm) Some 1m and 2m also available Condition: good Available: immediately Location: Rhine / Main region, later warehouse in Frankenberg / Saxony

Condition: new, Cantilever rack, one-sided, frame height 2.60m high, 80cm deep arms, 750kg per arm, hot-dip galvanized - New - : Price ex site incl. loading! Price: 1.480.-€ (net) Price transport / packaging costs within Germany (without islands): 400.-€ (net)! Of course, you can also build longer or shorter shelving units by omitting or purchasing additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: German brand manufacturer, new goods Description: - Shelving upright, one-sided 2,600 mm high, hot-dip galvanized - Base and arm depth 800 mm - with 3 height-adjustable shelf arms each - Load capacity with load center 400 mm - 750 kg per arm / 2..250 kg per upright with 4 uprights per arm level 4 x 750 kg = 3,000 kg Profiles: Frame (uprights): IPE 140, arms IPE 80 incl. longitudinal and diagonal bracing, The standard center distance between the frames is 1.30 m. Other standard center distances available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a length of 1.50m there is a small surcharge on top of the stated price! Special dimensions (other center distances) are also available on request, but also cost extra and have a longer delivery time as they have to be made separately! If you do not specify a different center distance, we will deliver the shelf with a center distance of 1.30m. Itsdpfxsnwmwvs Aktjg In this case, the length of a row of shelves with 4 uprights (3 bays) is approx. 4m. Supplied with all screws and nuts (dispatch within Germany by parcel directly from Würth), without ground anchors. When using additional arms per frame, please note that the specified maximum load capacity of the frames must not be exceeded, or the maximum usable load capacity per arm will be reduced! Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us! Available optional extras (at extra cost), photos enclosed: Footrest with load deflector Footrest with load deflector, large Foot section with tire guard Cantilever arm with load deflector Cantilever arm with plug-in roll-off protection Clampable roll-off protection Gratings Conversion for use for the storage of pallets Photos are examples of single-sided shelving and the material used!

Condition: good (used), Shelves for shelving units, SSI Schäfer R3000 / R4000, depth 30cm, 40cm, 50cm, and 60cm, width 1m and 1.28m - used - : If you are interested, we can also offer you the corresponding frames as new goods! Width approx. 1m Price per piece: 30cm = €6 (net) 40cm = €6 (net) 50cm = €6 (net) 50cm = €8 (net) 60cm = €12 (net) 60cm = only €8 (net) – Condition with slight rust or slight zinc bloom on the approx. 4cm high shelf edges (both can be repaired – photos on request) 61cm = €8 (net) Price per Euro pallet: €10 (net)! Manufacturer: SSI Schäfer Type: R3000 / R4000 Year of manufacture: unknown 30cm x 1m = 204 pieces, painted 40cm x 1m = approx. 139 pieces painted 40cm x 1m = approx. 1,146 pieces 50cm x 1.28m = 38 pieces 50cm x 1.30m = 66 pieces 60cm x 1m = 94 pieces 60cm x 1m = 22 pieces painted 60cm x 1.30m = 190 pieces painted 60cm x 1.30m = at least 420 pieces (5 pallets of approx. 90 pieces) - condition with slight rust or zinc bloom on the 4cm shelf edges 61cm x 1.28m x 3cm height = approx. 1,500 shelves in stock in Austria Location: A-4774 St. Marienkirchen near Schärding (Please note special dimensions!!) Plus approx. 1,530 shelves in the Frankenberg warehouse (12 pallets of 120 pieces + 1 pallet of 90 pieces) The shelves also fit into 60cm deep fields, all you have to do is move the bulkheads in the frame. Itedpfoglk U Eex Aktsg Load capacity per shelf: 1m = at least 100kg 1.28m = at least 150kg Condition: good Available: from around mid/end October 2020 Location: Frankenberg warehouse (Saxony)

Condition: new, Year of construction: 2020, Cantilever rack, one-sided, 6.30m high, 1.20m arms, 900kg per arm - new - : Price ex location incl. loading! 1 shelving unit with 4 uprights 3.732.-€ (net)! Transportation costs within Germany (without islands): 490.-€ (net)! One cantilever shelving system, hot-dip galvanized, consisting of: Shelving upright, one-sided approx. 6,300 mm high, hot-dip galvanized Base and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity with load center 600 mm 900 kg per arm / 4,000 kg per upright with 4 uprights per arm level 4 x 900 kg = 3,600 kg Profiles: Frame: IPE220, arms: IPE 100 with longitudinal and diagonal bracing e = 1300mm, standard is 1.30m. Other standard lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a length of 1.50m there is a small surcharge on top of the stated price! Special dimensions (other center distances) are also available on request, but also cost extra and have a longer delivery time as they have to be made separately! If you do not specify a different center distance, we will deliver the shelf with a center distance of 1.30m. Isdpfx Aofivg Soktotg In this case, the length of a row of shelves with 4 uprights (3 bays) is approx. 4m. Supplied with all nuts and bolts (dispatch within Germany by parcel direct from Würth), without ground anchors. Other configurations (frame height, arm lengths, arm types etc.) available! Please contact us!

Condition: good (used), approx. 900 pieces shelf dividers (continuous) for shelf racks 30cm - used - : Prices per piece ex location: 2,50 € (net) disassembled, packed and loaded! Manufacturer: SSI Schäfer type: would have to TR 3330 Year of manufacture: unknown Height: approx. 33cm height incl. "lugs": ca. 36cm Depth: ca. 26cm - for shelf depth 30cm Galvanized Original price: ca. 7.-€ Iodpfxeki Tq Ij Aktetg Condition: good Available: immediately Location: Warehouse Frankenberg (Saxony)

Condition: good (used), approx. 24 pieces frame SSI Schäfer R3000, depth 30cm - used - : Price per piece: only 30.- € (net), packed and loaded ex site! Manufacturer: SSI Schäfer Type: R3000 Year of manufacture: unknown Frame height: approx. 2,28m Frame depth: 30cm Condition: good Available: immediately Location. Frankenberg / Saxony Ijdpfxeki Tz Ae Aktotg

Condition: good (used), approx. 870 pcs. shelves SSI Schäfer R3000, shelves approx. 1,m x 0,40m - used - : Price per piece: only 8,50 € (net), packed and loaded ex site! Itsdski T Akspfx Aktog Minimum purchase 1 pallet (approx. 180 pieces) Manufacturer: SSI Schäfer Type: R3000 Year of manufacture: unknown dimensions: approx. 1m x 0,40cm 870 pcs. shelves Load capacity per shelf: min. 100kg Condition: good Available: immediately Location. Frankenberg / Saxony

Year of construction: 2021, condition: new, Cantilever rack, one-sided, 6.30m height, 1.20m arms, 500kg per arm - new -: Price ex location including loading! 1 shelf unit with 4 stands € 4.115 (net)! Transport costs within Germany (excluding islands): € 490 (net)! Of course, you can also build longer or shorter shelving units from them by omitting or buying additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: Shelf uprights on one side approx. 6,300 mm high, hot-dip galvanized Leg and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity with a load center of 600 mm 500 kg per arm / 4,000 kg per stand with 4 stands per arm level 4 x 500kg = 2,000 kg Profiles: frame: IPE220, arms: IPE 80 Ijdpefivg Rjfx Aktotg with longitudinal and diagonal bracing e = 1300 mm, the standard is 1.30 m - so if you do not have any deviating information, we will deliver the rack with a center distance of 1.30 m. Other center distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard delivery, the length of a row of shelves with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without ground anchors. Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us!

Year of construction: 2021, condition: new, Cantilever rack, double-sided, 4.16m height, 1.20m arms, 750kg per arm - NEW -: Price ex location including loading! 1 shelf unit with 4 stands 3420,- € (net)! Price for transport within Germany (excluding islands): € 550 (net)! Of course, you can also build longer or shorter shelving units from them by omitting or buying additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: 4 shelf stands, double-sided, approx. 4.16 m high, hot-dip galvanized IPE 160/100 each with 2x3 adjustable. Arms 1.20 m, 750kg load capacity per arm with bandages approx. 1.30 m Shelf uprights on both sides approx. 4160mm high, hot-dip galvanized Leg and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity at load center of 600 mm 750kg per arm / 2250kg per stand side with longitudinal and diagonal bracing e = 1300 mm, the standard is 1.30 m - so if you do not have any deviating information, we will deliver the rack with a center distance of 1.30 m. Other center distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard delivery, the length of a row of shelves with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without ground anchors. Itedpfx Akjfivhfjteg Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us!

Condition: new, High quality grating supports with high load capacities, low priced alternative for grating - new -. Prices on request! Manufacturer: Delta Shelving Type: Manta Mesh Standard width: 885mm (for a 2,70m truss then 3 supports are needed = 2.655mm) 1335mm Frame depths: 1,05m 1,10 1,20m Other depths on request! Uniformly distributed load: between 250 and 1.500kg Standard (price applies to the standard version): 1.000kg, i.e. also per pallet Grid size: 50 x 100 or 25x100mm Please also indicate which type of beam (truss type) you have when making an inquiry! So whether box profile (or IPE beam) 50 or 40mm, or whether you have trusses with step. Advantages: no sharp edges 200% safety factor - independent of the rack beams Can be tested for permissible deflection and structural failure Wide range of standard sizes and load capacities MantaMESH is our market leading wire mesh shelving solution. MantaMESH delivers certainty with more than 70% open area and a 200% safety factor that exceeds the requirements for ANSI MH26.2 - 2007, NFPA 13 and the FM Global Approval Standard for ESFR Sprinklers. Compatible with ANSI MH 26.2 - 2007 Manufactured in Germany Pre-welded seamed support channels Pre-galvanized finish Itsdpfx Akoiuvxbstog Maximum deflection independent of rack beams: 1100 mm deep: 6.67 mm at 1000 kg load Load at structural failure independent of support beams: 1100 mm deep: 2000 kg Mesh has more than 70% open area Example configuration - we will be happy to create a configuration for your application!!! Depth 1102mm width 881 mm 4 pre-welded support channels 50x100mm mesh size 1000 kg UDL independent of the support beams Front: fold 30mm outwards Rear: Fold outside 30mm downwards Item weight 9.43kg

Condition: new, Year of construction: 2025, Cantilever racking for light loads, single-sided, frame height 2m, rack length approx. 3m, arms 50cm deep, 200kg per arm, hot-dip galvanized – new product: Price ex-works including loading: only €895 (net), plus packaging and freight. Price per additional upright: €225 (net) Transport cost on request! Manufacturer: Bruckamp Year of manufacture: New Model: Super Light Set components: 4 uprights with 5 arms / 3 bays with connectors Upright spacing: approx. 1m Total assembled length: approx. 3m Rack height: 2m Base and arm depth: 500mm Robust construction – made from IPE 100 with welded arms at approx. 330mm intervals. Load capacity per upright: 1,000kg Load capacity per arm: 200kg Includes floor anchors Includes load rating plate Description: Set of 4 uprights with 1m bay width, including all bolts. Iodpfxsxbz Dds Aktstg Key advantages: Easy assembly – the rack is designed for quick and straightforward installation. Versatile use – whether in the garage, workshop, or for small spaces, the rack adapts flexibly. Safe & practical – the rectangular arms feature plastic end caps to prevent injuries.

Condition: good (used), ca. 452 shelves Meta, 1m x 0,40m / 0,60m - used - : Price per shelf: 8.-€ (net)! Minimum purchase: 50 pieces Manufacturer: Meta Type: Meta Clip Year of manufacture: unknown Depth: 60cm width 1m = approx. 52 pieces Depth: 40cm width 1m = approx. 400 pieces Shelves are partly knocked out or slightly bent at the holders for the shelf supports. A blow with a hammer should be enough so that they can be hooked in again without problems. Height: approx. 4cm Load: unknown - should carry at least 100kg Itedpfx Akjki Txcjtog Condition: good Available: immediately Location. Frankenberg / Saxony

Condition: new, Year of construction: 2026, Approx. 360 starter bays (more available on request), boltless shelving racks, plug-in system, manufacturer: dalminels, dimensions: 1.30m x 0.60m (other sizes available), frame height: 2.20m (other heights available) – New equipment: Price per starter bay: €119 (net) Price per extension bay: €99 (net) Purchase only by the truckload, otherwise the transport costs may be disproportionately high! Approx. 360 bays fit per truckload (depending on configuration). Manufacturer: dalminels, Italy Model: Errex Year of manufacture: New Finish: Galvanized Frame height: approx. 2.20m (other heights, e.g., 2m available on request) Load capacity per level: 141 kg Isdpfxjyhxmne Aktetg 5 shelves per bay – additional shelves available at extra cost Shelves approx. 1.30m x 0.60m (shelves consist of 3 panels, each 20cm deep) This system features shelves that slot into rails on the sides. Condition: New delivery time: approx. 4 weeks, usually faster – please inquire for current lead times! Location: Delivery included within Germany Other shelf sizes available on request: For example: Widths: 1m and 1.30m Depths: 30cm / 40cm / 50cm / 60cm / 70cm / 80cm Accessories available at extra cost: e.g., drawers, dividers, bracing beams as an alternative to cross braces, etc. Also available as multi-level installations!

Condition: good (used), approx. 100 bays shelf racks, Dexion, frame height 2,20m, dimensions shelves 0,46m x 1m - used - : Complete sale only: Price ex location: only 6.500.-€ (net), disassembled, packed and loaded! Manufacturer: Dexion Type: unknown Year of construction: unknown frame height: approx. 2,20m Number of frames: 144 pieces shelves: 46×100cm number of shelves: 396 pieces Shelf depth: ca. 48cm Condition: good Available: immediately Location: warehouse Frankenberg Itsdpfx Aksi Nqdtjtsg P.S. ev. we would have to reorder the fit floor holders as new!

Condition: good (used), approx. 1.000 pieces depth ledgers / bulkheads for 80cm deep shelf SV, Bito - used - : Prices per piece ex location: 1,50 € (net) disassembled, packed and loaded! Minimum purchase: 200 pieces Itedpfxekhd Ufj Aktog Manufacturer: Bito Type: SV Year of manufacture: unknown Quantity: 1 box pallet full Condition: good Available: immediately Location: Warehouse Frankenberg (Saxony)