Measuring Plate

STOLLE

Condition: good (used), Cast iron marble plate Length: 3500 mm Width: 2500 mm Thickness: 300 mm Bwedpfx Ajzg Hc Nsfmop Height on feet: 900 mm Delivered with 12 leveling feet Weight : 6,3 T

Condition: used, Year of construction: 2017, Working hours laser on: 28.313 h Working hours beam on: 8.421 h Laser power: 6000 Watt Working range laser: 3048 x 1524 x 70 mm Max. steel: 25 mm Max. stainless steel: 30 mm Max. aluminium: 30 mm Max. copper: 12 mm Max. brass: 12 mm Length: 11000 mm Width: 6050 mm Height: 2565 mm Machine weight: 12000 kg Electrical connected load: 31 kW Bsdjyrfxzepfx Afmswp Standard configuration - Maximum positioning speed parallel axis x, y: 120 m/min- Maximum simultaneous positioning speed: 170 m/min- Positioning accuracy Pa: +/- 0,05 mm- Repeatability Ps: +/- 0,025 mm- Maximum workpiece weight: 1100 kg- Operation via panel: ByVision Touchscreen and manual control unit Extended machine accessories - nozzle changer 40 positions- Detection Eye - Cut Control- Power Cut Fiber Automation - ByTrans Extended

Condition: excellent (used), overall weight: 4,800 kg, total height: 390 mm, total length: 4,660 mm, total width: 2,100 mm, T slotted bed plate STOLLE - SDT Cast iron floorplates 4660 x 2100 x 390 mm (5x) there is a 3e (shorter) plate avaielebl in size 3050 x 2100 x 390 mm    Vloerplaat lengte: 4660mm Vloerplaat breedte: 2100mm Vloerplaat dikte: 390mm Aantal T gleuven: 7 Sprong / Hart op Hart: 300mm Bodpfxjzc Im Nj Afmewp T -slot size: 28mm Gewicht per plaat ca.: 4800kg Number of matching pieces:2,5 Lengte: 4660mm Breedte: 2100mm Hoogte: 390mm Gewicht: 4800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1995, overall weight: 8,800 kg, total height: 400 mm, total length: 4,000 mm, total width: 2,100 mm, T slotted bed plate STOLLE - RTS Cast iron floorplates 4000 x 2100 x 400 mm (2x) MACH-ID 6442 Make: STOLLE Bodpfxozc Ihtj Afmjwp Type: RTS Year: 1995 Floorplate Length: 4000mm Floorplate Width: 2100mm Height: 400mm No. Of T-slots: 7 Distance from T to T-slot / Jump:300mm T -slot size: 36mm Weight a plate approx.: 8800kg Number of matching pieces: 1 Length: 4000mm Width: 2100mm Height: 400mm Weight: 8800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2025, functionality: fully functional, Specialised press built from the ground up for briquetting of iron, steel and similar alloys. Includes integrated oil collection pads. Does not include packing table – only briquette guides (slides). Comes with see through bunker doors & oil heating elements as standard. Machines are controlled by Siemens KTP-400 touchscreens. 2nd generation available for purchase from February 2024. For this press please first contact us! Bjdpfx Ajtmugcofmjwp Technical Data : Throughput: Up to 600 briq/h* Main motor: 30kW Infeed motors: 2.6kW Cooling system: 1.6kW Total power: 34.2kW Oil tank: 260l Filters: 4 Length: 2000mm Width: 2000mm Height: 2200mm Weight: 3500kg Briquette size: 40-110, D80mm Warranty: 2 years / 2 000 workhours

Condition: excellent (used), Year of construction: 2010, overall weight: 3,200 kg, total height: 353 mm, total length: 4,000 mm, total width: 1,000 mm, T slotted bed plate STOLLE - TRD Cast iron floorplate 4000 x 1000 x 355 mm MACH-ID 6445 Make: STOLLE Type: TRD Year: 2010 Floorplate Length: 4000mm Floorplate Width: 1000mm Height: 355mm No. Of T-slots: 4 Distance from T to T-slot / Jump:250mm T -slot size: 42mm Weight a plate approx.: 3200kg Number of matching pieces: 1 Bjdpfx Aszc Igvsfmewp Length: 4000mm Width: 1000mm Height: 353mm Weight: 3200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1995, overall weight: 4,000 kg, total height: 300 mm, total length: 4,500 mm, total width: 1,000 mm, T slotted bed plate STOLLE - 4500 x 1000 Bwedpfx Afszc If Eomsp Cast iron floorplate 4500 x 1000 x 300 mm Floorplate Length: 4500mm Floorplate Width: 1000mm Height: 300mm No. Of T-slots: 4 Distance from T to T-slot / Jump:250mm T -slot size: 30mm Weight a plate approx.: 4000kg Number of matching pieces: 1 Length: 4500mm Width: 1000mm Height: 300mm Weight: 4000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2024, Used double-sided cantilever racking: hot-dip galvanized bolted system Scope of supply: 4 double-sided racking uprights, height 4,160 mm with base section 1,200 mm 24 cantilever arms with 1,200 mm depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments - Per upright, 6 screwable cantilever arms and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels on top of each other per upright side - Including longitudinal and diagonal bracing for 1,300 mm distance - Racking length 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time Bsdpfx Afsh Ek Daemjwp - On-site collection possible Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with prior notification before delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The subsoil must be made of concrete, level and suitable for dowels, and must be able to absorb the acting loads. The customer must check and ensure the ground conditions, load-bearing capacity, and any required official permits. The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: excellent (used), Year of construction: 2000, overall weight: 5,500 kg, total height: 365 mm, total length: 4,500 mm, total width: 1,750 mm, T slotted bed plate STOLLE - RDG Cast iron floorplates 4500 x 1750 x 365 mm (2x) MACH-ID 6452 Make: STOLLE Type: RDG Year: 2000 Floorplate Length: 4500mm Floorplate Width: 1750mm Height: 365mm No. Of T-slots: 5 Distance from T to T-slot / Jump:320mm T -slot size: 36mm Number of matching pieces: 2 Length: 4500mm Width: 1750mm Height: 365mm Weight: 5500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Bedpfx Aozc Idbefmowp

Condition: excellent (used), overall weight: 14,000 kg, total height: 455 mm, total length: 5,500 mm, total width: 2,420 mm, T slotted bed plate STOLLE - DT-4/2 T slotted cast iron floorplate 4000 x 2420 x 455 mm Floorplate Length: 5500mm Floorplate Width: 2420mm Height: 455mm No. Of T-slots: 6 Distance from T to T-slot / Jump:400mm T -slot size: 42mm Weight a plate approx.: 14000kg Number of matching pieces: 2 Length: 5500mm Bwsdszc Ibmspfx Afmjp Width: 2420mm Height: 455mm Weight: 14000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2025, sheet thickness steel (max.): 6 mm, cutting length (max.): 3,050 mm, Guillotine shears: Available immediately! General performance features: Cutting length: 3100 mm Maximum sheet thickness: 6 mm (mild steel), 4 mm (stainless steel) Projection in the side stand: 50 mm Number of strokes: 15 per minute Cutting angle: 1° Number of hold-down devices: 16 Hold-down pressure: 14 tons Backgauge: Up to 1000 mm Backgauge speed: 200 mm/s Motor power: 15 kW Oil tank volume: 200 liters Support arms: 2 pieces Bwodpfx Aorx Sydjfmjp Table dimensions: 865 mm (height) x 500 mm (width) x 3515 mm (length) Dimensions and weight: Length: 4110 mm Width: 2200 mm Total width (with support arm and rear protective grille): 3700 mm Height: 2100 mm Weight: 7650 kg This guillotine shear is the ideal addition to your workshop, taking efficiency and precision to the next level. Get this high-quality machine for demanding metalworking projects. Contact us now for more information and a personalized quote!

Condition: excellent (used), Year of construction: 1996, overall weight: 4,200 kg, total height: 350 mm, total length: 3,500 mm, total width: 1,750 mm, plate height: 350 mm, plate width: 1,750 mm, groove spacing: 250 mm, T slotted bed plate STOLLE - DT Bsdpfx Ajzcn Iysfmewp MACH-ID 9373 Make: STOLLE Type: DT Year: 1996 T slotted bed plate STOLLE - DT MACH-ID 9373 Make: STOLLE Type: DT Year: 1996 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Inspection table / Measuring table Manufacturer: STOLLE Bedpfozavcaox Afmowp Tabletop dimensions: (mm) 3,000 x 3,000 x 350 TECHNICAL DATA Tabletop dimensions L x W x H: (mm) 3,000 x 3,000 x 350

Condition: as good as new (ex-display), A fully hydraulic demonstration bending machine WIEGAND with NC- 10 control system manual or automatic bending mode automatic mode: Close upper beam, bend set angle, open upper beam Bedjpgmqiopfx Afmewp bending beam or upper beam manually adjustable according to sheet thickness adjustable opening width of upper beam backgauge manually adjustable CE standard documentation bending length: 2500 mm bending capacity: 2,5 mm max. bending angle: 0 - 120°. backgauge manually adjustable min/max: 60/1000 mm power: 3,0 kW weight: 2500 kg Tech. Data and dimensions: Errors excepted Further tech. Data see pdf. Document

Condition: good (used), Year of construction: 2000, Cast iron measuring and marking table with under-table cabinet, STOLLE MT1000. Bodpfxewffz De Afmjwp Table: 1000 x 1000 mm Height: 1000 mm Weight: approx. 650 kg In good condition.