Swiss CNC lathe

STAR Micronics SR32J

Condition: good (used), Year of construction: 2007, Control: FANUC 18i-TB Max. bar diameter: 32 mm Max. spindle head stroke: 310 mm Spindle speed: 350 - 7,000 rpm Max. bar diameter on sub-spindle: 32 mm Max. sub-spindle speed: 350 - 7,000 rpm Number of usable tools: 21 Turning tools in multi-tool holder: 6 Driven tools for cross machining: 3 Front drilling tools: 4 Rear drilling tools: 4 Back machining: 4 Driven tool speed: 5,000 rpm Bar feeder: FMB turbo 3-36 Gsdpfx Afoxcx D Dekjtt

Condition: excellent (used), Year of construction: 2009, CNC controller: M720BM Capacity X-axis travel mm: 260 Y-axis travel mm: ±50 (100) Z-axis travel mm: 795 Turning length mm: 705 Max. turning diameter mm: ø 356 Swing over bed mm: ø 923,8 Swing over cross-slide mm: 755 Bar work capacity mm: 80 C-axis degree: 0,001° Upper turret Number of tool slots St .: 12 Godsxcqz Iopfx Afkjtt Speed ​​driven tools RPM: 6.000 Drive power driven tools kW: 5,5/3,7 (3 min/cont) Indexing time s: 0,25 Main spindle Speed ​​spindle rpm: 4.000 Drive power spindle kW: 18,5/15 (25% ED/cont) Spindle bore mm: ø91 Tailstock Tailstock travel mm: 734 Holder: MT5 Equipment Chip conveyor Tool measuring arm

Condition: ready for operation (used), Year of construction: 2007, General Data Measurements width 1275 mm Measurements depth 2711 mm Measurements height 1705mm Main Drive Spindle speed range 7000 Spindle motor power 5.5kw Stroke 310 mm Number of axis 3 Movement X-Axis Rapid Traverse 24m/min Y-Axis Rapid Traverse 24m/min Gtodpfxsx D Etnj Afkst Z-Axis Rapid Traverse 24m/min Additional Equipment With FMB bar loader The Star SR32J is sold together with an FMB trubo 3-36 stage loader. The bar loader was built in 2008, and the machine itself is from 2007. The machine features a JBS guide bushing system for increased precision thanks to flexible guide bushings. It also features a Star ER 16/ER11 front-end drilling unit with three spindles for front and rear machining. This 3-axis Star SR-32J swiss type turning machine was manufactured in 2007. It features a FANUC control system, FMB bar loader, and a maximum machining diameter of 32mm. The machine offers a rapid feed rate of 24m/min and a main spindle speed up to 7,000min. Ideal for high precision turning, it includes a coolant tank capacity of 174 liters. Contact us for more information about this machine. Application Types Turning

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 32 [mm] - Travel : 310 [mm] - Spindle speeds : 7.000 [rpm] - Spindle power : 7,5 [kW] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Max. bar diameter : 32 [mm] - Spindle speeds : 7.000 [rpm] - Spindle power : 3,7 [kW] - C axis indexing precision : 0,001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 11 - Number of motorized positions : 5 - Live tools speed : 5.000 [rpm] - Live tools power : 1,2 [kW] END ATTACHMENT - Number of positions : 4 SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 6,2 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.711 x 1.275 [mm] - Machine height : 1.705 [mm] - Machine weight : 3.100 [kg] MACHINE HOURS - Number of working hours : 35.367 [h] Gedpsuhazaofx Afkett EQUIPMENT - CNC : Fanuc 18i-TB - 3 colors status lamp - Coolant tank * with high-pressure pump - Bar loader : FMB Turbo 3-36/3200/A (2008)) - Ejection of workpiece - Parts catcher - Parts conveying strip - Chips conveyor - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: used, Year of construction: 2012, Technical details: turning diameter over bed: 20 mm spindle passage: 3-20 mm turning length: 250 mm control: FANUC 31 i-A main-spindle speed: 10.000 1/min subspindle speed: 10.000 1/min Main spindle capacity: 3,7 kW subspindle power: 2,2 kW number of tools: 35 weight of the machine ca.: 3,3 t dimensions of the machine ca.: 2,11 x 1,2 x 1,89 m CNC sliding headstock turning/milling centre with B-axis Control system: Fanuc 31i-A Machining length: max. 250 mm Number of controlled axes: 7 axes and max. 5 axes simultaneously B-axis: 0°-130° freely programmable Rod passage: Ø 3 mm to max. Ø 20 mm Drive power main spindle: 3.7 kW Drive power counter spindle: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: Main and counter spindle Number of linear supports: 2 pieces Total number of tools: 35 pieces Dimensions (LxWxH) in mm: 2,110×1,200×1,885 Weight: 3,300 kg Conversion from long to short turning Deep hole drilling stations NAKANISHI high-speed spindle Rear slide with Y-axis Cross drilling rear side Chip conveyor Fire extinguishing system FMB bar loader Minimag 20, year 2012 Approx. 7.200 working hours Gtodpovivx Nsfx Afkot *

Condition: excellent (used), Year of construction: 2018, Control Fanuc 32I-B, bar capacity 32mm, maximum cutting diameter 32mm, maximum cutting length 310mm, maximum drilling diameter 13mm, maximum tapping capacity M12, Godpjw Rct Hjfx Afkett milling speed 5,000rpm, spindle speed 7,000rpm, Sub spindle C axis 0.001 degree, FMB Turbo 3-36/3200 barfeed, number of controlled axis Z, ZB, X, XB, C1, C2, Y. swarf conveyor,

Condition: new, Year of construction: 2026, The ERBA Turbo 60 is a centrifugal finishing machine designed for deburring, smoothing, and polishing small to medium-sized workpieces. The machine features a digital process timer, a digital speed display, and a dosing pump (wet configuration). The turntable speed can be adjusted via a frequency converter. The Turbo 60 is available in both dry and wet configurations and can be ideally linked with the ERBA YE-60 separation unit shown in the images. Technical data: - Gross volume: 60 liters - Drive power: 3.0 kW - Turntable speed: 75 to 300 rpm - Optional equipment: tilting motor, soundproof cover, or separation box All prices are net, plus the currently applicable statutory VAT and shipping costs. The images may depict the machine with optional accessories, which are available separately and subject to additional charges. Godsn Ut Ilopfx Afkett If you are interested, we look forward to hearing from you. We are happy to advise you without obligation. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This listing serves solely as an online presentation of our goods. Contract negotiations take place via telecommunications (email, telephone, messaging portal). As an initial step, we will send you a non-binding offer, which will also provide details of our general terms and conditions with legal notice and your right of withdrawal before a purchase/contract is concluded.

Condition: used, Round-tub vibratory finishing machine WALTHER TROWAL Type CLS-230 Order No. 05.833/00 Year of construction 1969 Gtjdsfqpxijpfx Afkst Tub diameter 1100 mm Total tub height approx. 650 mm Working container / Gross volume max. 230 liters Usable volume approx. 115 liters Speed 1100 to 1800 rpm, stepless Motor power 7.5 kW Power connection 400 Volt, 50 Hz - Operating cycle manual and via timer - Stepless motor speed adjustment via variator gearbox - Manually adjustable eccentric imbalance weights - Container with polyurethane lining – lining partially damaged or worn - Sound-insulated lid - Manual separation flap - Built-in screening device after the separation flap - Liquid connection - Material discharge opening 180 x 150 mm - Control cabinet for wall mounting - Baffle lid with perforated screen Space requirement with base L x W x H 1800 x 1750 x 1700 mm Net weight approx. 1800 kg In good condition Function description: Workpieces and abrasive media are set in motion by the generated vibration and are recirculated extremely gently. The constant relative movement between workpieces and abrasive media results in deburring and surface finishing of the workpieces.

Condition: used, Year of construction: 2017, Absolutely as good as new Consists of 1 measuring case 12-20mm Gtjdpfevvxvdsx Afkjt Consists of 1 measuring case 20-50mm Consists of 1 measuring case 50-100mm

Condition: excellent (used), Year of construction: 2014, operating hours: 14,500 h, functionality: fully functional, machine/vehicle number: 11779, turning length: 700 mm, turning diameter: 250 mm, spindle motor power: 26,000 W, spindle speed (min.): 3,200 rpm, spindle speed (max.): 3,200 rpm, spindle bore: 65 mm, overall weight: 8,500 kg, incl. 2x Hainbuch/Ortlieb chucks, conveyor belt, swiveling measuring probe with 2 heads, MANUAL GUIDE_dialog programming, high-pressure pump 18 bar/20 l/min, SBS tool breakage monitoring and wear control. Machine year 2013 – Commissioned 05/2014 Good & well-maintained condition Original price approx. €300,000 Gtodpfx Ajrdy Uqsfkjt !!! ATTENTION -> Sale without loader!!!