Used Vacu for sale (1,284)

Condition: used, Year of construction: 2010, machine/vehicle number: 1000017741, inner dimension length: 1,000 mm, inner dimension width: 840 mm, inner dimension height: 815 mm, operating temperature: 1,700 °C, usable tank capacity: 685 l, No minimum price – guaranteed sale to the highest bidder! The machine was professionally dismantled and stored. All parts and connections are labeled for reassembly. An on-site inspection is possible at any time. TECHNICAL DETAILS Furnace chamber and usable space Usable batch space (W × H × L): 840 × 815 × 1,000 mm Total length of the graphite box: approx. 1,100 mm Usable volume: approx. 685 l Djdpfoz I Tt Ijx Al Ajwc Operating temperature: max. 1,700 °C Operating temperature under partial pressure: max. 1,500 °C Operating temperature under vacuum: max. 1,700 °C Temperature uniformity: ± 10 K Temperature fluctuation in the steady state: ± 5 K MACHINE DETAILS Process pressure range: 1 × 10⁻² < p < 1,040 mbar Final pressure in the empty, clean, and cold furnace: < 1 × 10⁻² mbar Leak rate: < 5 × 10⁻³ mbar·l/s Power supply: 3 × 400 V, 50 Hz Permissible voltage fluctuation: max. ± 5 % Installed heating power: max. approx. 190 kW Electrical power of the pump station: approx. 14 kW Cooling water flow rate: approx. 150 l/min Cooling water temperature: 20–30 °C Cooling water pressure: 2–4 bar Cooling water quality requirements: according to specification PW 800 943 ND Compressed air for valve operation: 4–5 bar Nitrogen inlet pressure: 5–7 bar Hydrogen inlet pressure: 5–7 bar EQUIPMENT Double-walled furnace chamber made of stainless steel with water cooling Internal graphite box for precise guidance of the process gases Post-cleaned graphite components Automatic control of the entire process Pump station Labeled lines and connections for easier recommissioning Note: Two internal graphite heating elements were damaged during dismantling and must be replaced.

Condition: used, mileage: 214,000 km, power: 245 kW (333.11 HP), first registration: 02/1990, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: mechanical, Year of construction: 1985, Equipment: ABS, Int. No.: 221 Well-maintained SCANIA with KAISER superstructure Suction-pressure combination flushing unit Dedpfx Alsz Nuggj Aowc Scania * P112 * 6x4 * Suction-pressure combination flushing unit * KAISER sewer jet * High-pressure pump KDU 300 * Vacuum pump KAISER M13 * Kaiser suction nozzle * Hose reel 120m 1" * Hand reel * First owner * Municipal ownership Good condition Trade-in possible Financing from 4.99% Errors and prior sale excepted! The information in this advertisement is a non-binding description and does not constitute guaranteed characteristics. The seller assumes no liability for typographical and data transmission errors. Listed equipment must be checked separately. All information in the advertisements is non-binding! Delivery throughout Germany upon request Opening hours: Monday to Thursday from 9:00 a.m. to 5:00 p.m. Friday from 9:00 a.m. to 2:00 p.m. and by appointment!!!

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Vacuum lifter from Schmalz for handling flat materials with a suction cup. Maximum lifting capacity: 125 kg. Schmalz model: MOD-VM-BASIC-125/250, BB-VM-BASIC-600-HI Adjustable suction cup, maximum dimensions: 1600 x 750 mm Suction cup diameter: 220 mm Vacuum pump: EVE-TR 4 AC 3 Dodpoz Nplksfx Al Aowc Operating lever Mounted on a stand with 4 wheels.

Condition: used, Year of construction: 2000, functionality: fully functional, overall weight: 12,000 kg, Equipment: documentation/manual, FOUR IPSEN TQ 2/7 Dwsdpfx Alez Iayue Ajc - Completely refurbished in 2010 - Usable dimensions: 910*610 H=500 - Gas-fired heating with radiant tubes - Control (load and atmosphere) via PROTHERM 500 system PRICE (incredible!): €32,000 EXW (excluding VAT) ENDOTHERMIC GENERATOR IPSEN 2018 (new retort in 2023) - Gas-fired heating - Reaction gas = natural gas PRICE: €32,000 EXW (excluding VAT) Equipment to be dismantled by the buyer (We can provide a quote for dismantling and loading onto a truck) Equipment available immediately Inspection possible (Saint Etienne 42)

Year of construction: 2015, operating hours: 1,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: M15090L, For sale is a high-quality vacuum membrane press from Columbus Presstechnology. Type: Multimat Sonder Model: M15090L Year of manufacture: 2015 The machine is in good, well-maintained condition and is immediately ready for operation. Technical data: Voltage: 400 V / 50 Hz Power: 19 kW Suction capacity: 40 m³/h Vacuum: up to -0.9 bar Temperature range: up to 140 °C Equipment / Condition: Fully functional and ready for use Robust industrial design Dodpfxey I Ugue Al Ajwc Membrane included (used but functional condition) User-friendly controls Ideal for woodworking, furniture, or plastics processing Applications: Veneering Foil lamination Mold making / plastics processing Prototype production Inspection is possible – the machine is ready for use.

Condition: used, Year of construction: 2009, functionality: fully functional, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, suction capacity: 6,000 m³/h, intake manifold diameter: 300 mm, filter area: 28 m², total height: 2,500 mm, total length: 3,150 mm, total width: 1,030 mm, overall weight: 900 kg, Wood chip extraction system, dust extraction system, self-cleaning filter, vacuum system – Hoecker Polytechnik brand. Model: Vacumobil JT 300 – with pneumatic cleaning of filter bags using compressed air during operation. Dodpfjz Nxxaox Al Ajwc Year of manufacture: 2009 Fan power: 7.5 kW Capacity: 6,000 m3/h Filtration area: 28 m2 Air return Dust tank capacity: 495 liters Equipped with an automatic fire suppression system Inlet diameter: 300 mm Stock number: 1172

Condition: used, mileage: 266,711 km, power: 410 kW (557.44 HP), first registration: 03/2019, fuel type: diesel, overall weight: 40,000 kg, axle configuration: > 3 axles, gearing type: automatic, emission class: euro6, The vehicle is in transit. Mercedes-Benz 1845 ?? ?First registration: 03/2019 ?? ?Auxiliary heater ?? ?Adaptive cruise control ?? ?Automatic climate control ?? ?Reinforced engine brake ?? ?Premium/comfort package ?? ?Driver's seat in leather ?? ?Sleeper cab with mattress ?? ?Electric sunroof ?? ?Other extensive equipment Leistikow suction/tank semi-trailer ?? ??? Year of manufacture/first registration: 03/2019 ?? ?Total capacity: approx. 28,500 liters ?? ?of which separate fresh water tank: approx. 1,000 liters ?? ?Suction and discharge nozzles at the lower edge ?? ?Additional suction and discharge nozzle at approx. 2/3 of the height of the discharge flap ?? ?Large discharge flap ?? ?Odor neutralization system ?? ?Professional design for suction and discharge operations HD pump ?? ?Manufacturer: Pratissoli ?? ?Type: KEH 30 ?? ?Working pressure: 130 bar ?? ?Flow rate: 70 l/min Dwedez N Rhyspfx Al Ajc ?? ?Speed: 1,450 rpm Vacuum pump ?? ?Manufacturer: Gardner-Denver (Wittig) ?? ?Type: RFW 200 DVR ?? ?Speed: 1,500 rpm

Condition: used, mileage: 547,604 km, power: 338 kW (459.55 HP), first registration: 08/2003, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2027, brakes: retarder, gearing type: mechanical, emission class: euro3, Equipment: parking heater, Well-maintained MAN 27.460 suction and flushing combination unit from Müller Canalmaster F130 EG, including a remote control, a boom, and a Rottec Tec 200 vacuum pump with a Uraca high-pressure pump (P3-45/60). - Müller combination suction/high-pressure flushing unit - Canalmaster F130 EG - Rottec Tec 200 vacuum pump, rotary compressor vacuum pump, water-cooled - Max. 1500 rpm, 1170 m3/h max. flow rate in free flow - Uraca P3-45 high-pressure pump with 205 bar and 330 l/min - Piston extension - pneumatic - Combination cassette boom - Remote control - Tank capacity 13,000 liters - 10,500 l sludge - 2,500 l fresh water - Discharge/emptying piston as an adjustable partition between - Sludge and water chamber (3-stage, pneumatically adjustable) - Suction/emptying nozzle DN 100 (shut-off plate slide valve) - Ball valve as a second shut-off valve, external. Level indicator at the rear - Flushing system: HD hose reel DN 25, hydraulically swiveling approx. 180° to the left, - HD hose reel DN 13 - Cassette boom: Suction hose cassette DN 100, hydraulically telescoping approx. 1250 mm - Approx. 17 m hose length, approx. 8 m lifting height. Connection arm fittings with tanker couplings (brass) DN 100 - Storage compartments: Hoses on both sides, tool/equipment cabinets with approx. 140 liters capacity - 6x2 drive axles - German vehicle, second owner - Leaf spring suspension - Air-suspended cab - Cruise control - Differential locks - Radio Djdpfx Alszuq U Eo Ajwc - Auxiliary heater - Bed - Dual H-gear shift - Financing options available through our partner banks; we will be happy to assist you. We expressly reserve the right to sell the vehicle in the meantime, as we are also offering it on other platforms. The information on accessories is without guarantee. Subject to change, prior sale, and errors. We strongly recommend and offer an inspection and test so that the buyer does not have any false ideas about the condition and suitability. Inspections and tests are possible at any time by appointment and are expressly desired.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total height: 2,000 mm, total length: 1,600 mm, total width: 1,600 mm, type of input current: three-phase, controller manufacturer: Union Dialog electronic control, compressed air connection: 6 bar, water pressure: 2 bar, Used 2018 Union MDMV 1 closed-circuit vacuum solvent degreaser, 50kg basket, Dialog control, Industrial Frigo chiller and 2 Safechem units. Manufacturer: Union Model: MDMV 1 Machine Type: Closed-circuit vacuum solvent metal degreasing / component cleaning machine Year: 2018 Condition: Excellent Includes: Industrial Frigo GR2A 30/Z industrial water chiller & 2 x SAFECHEM SAFE-TAINER chemical storage/handling units Machine Description Used 2018 Union MDMV 1 industrial metal degreasing and component cleaning machine, designed for precision cleaning of small and complex metal components using super-stabilised perchloroethylene (PCE / PER / tetrachloroethylene). This is a closed-circuit hermetic vacuum solvent cleaning system incorporating washing, rinsing, vapour degreasing, solvent recovery/distillation and vacuum drying within an enclosed process. Technical Specifications Maximum Basket Capacity: 50 kg Solvent Type: Perchloroethylene / PCE / PER / Tetrachloroethylene – C₂Cl₄ Solvent Load: Approx. 397 kg / 248 litres Main Electrical Supply: 400 V / 3 Phase / 50 Hz Installed Power: Approx. 23 kW Rated Current: Approx. 46 A Steam Pressure Requirement: Approx. 4–5 bar Compressed Air Requirement: Approx. 6–8 bar Water Pressure Requirement: Approx. 2–3 bar Floor / Ground Loading: Approx. 549 kg/m² Control: Union Dialog electronic control This particular machine also has a substantial integrated solvent-management system incorporating working and recovery tanks, solvent pump, fine filtration, swarf filtration, still/distillation system, condenser, heat exchanger, separator, decanter, vacuum pump and active-carbon treatment. Continuous Solvent Recovery A particularly useful feature of the MDMV design is the continuous solvent distillation/recovery system. Union states that MDMV machines operate under vacuum for rapid washing cycles and use continuous vacuum distillation with automatic final stripping of residues, allowing contaminated solvent to be regenerated and reused during production. Industrial Frigo GR2A 30/Z Chiller Included The machine is supplied with a 2018 Industrial Frigo GR2A 30/Z air-cooled industrial water chiller. Refrigerant: R407C Refrigerant Charge: Approx. 5 kg Electrical Supply: 400 V / 3 Phase / 50 Hz Rated Current: Approx. 23 A Nominal Water Pressure: Approx. 3.2 bar Dwodpfx Aloz Itlwo Asc Temperature Set-Point Range: -10°C to +25°C Weight: Approx. 390 kg The complete installation includes: 2018 Union MDMV 1 metal degreasing machine 50 kg maximum basket capacity Union Dialog control Closed-circuit solvent cleaning system Vacuum cleaning/drying system Rotating / oscillating basket system Spray cleaning capability Immersion cleaning capability Solvent vapour degreasing Integral solvent distillation and recovery Working solvent tank Recovered-solvent / waiting tank Solvent circulation pump Fine solvent filtration Swarf filtration Vacuum pump Condenser Heat exchanger Water / solvent separation Decanter Active-carbon vapour treatment system Floor safety / spill-containment tank 2018 Industrial Frigo GR2A 30/Z industrial chiller 2 x SAFECHEM SAFE-TAINER chemical handling/storage units Stainless steel containment trays Use and maintenance handbook Electrical documentation Please Note: All specifications, dimensions, capacities and descriptions are approximate and provided in good faith.

Condition: used, mileage: 237,000 km, power: 300 kW (407.89 HP), first registration: 02/2009, fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, gearing type: semi-automatic, emission class: euro5, Year of construction: 2009, Equipment: ABS, electronic stability program (ESP), * Mercedes Benz Actros 4141 suction and pressure tanker * Registered: 02-2009 * EURO 5 * EPS with clutch * SPRING / SPRING * Tank body by KOKS * Capacity: 12,000 liters Dsdpfezn E Slex Al Ajwc * High-pressure pump * More pictures and videos available via WhatsApp * Information without guarantee and subject to prior sale.

Condition: used, filling valves: 40 capacity / hour ca.: 10000 Dwsdpfxjz Ibvwe Al Aec capping heads: 8 working direction: right-left (CCW)

Year of construction: 1996, condition: excellent (used), TUBE BLASTING MACHINE.Machine is used to clean the inner surface of the copper tube in a continuous process of blasting. Dwsdpfxopmtb Rj Al Asc

Condition: used, Conveyorized chamber vacuum packaging machine for industrial food processing This VC999 K7B2 is a conveyorized chamber vacuum packaging machine, built by VC999 Verpackungssysteme in Switzerland, with a stainless steel, all-enclosed construction that avoids sharp edges and corners where dirt could collect. The machine runs two to three cycles per minute and features bi-active sealing bars with electronic temperature control and adjustable contact pressure, allowing secure sealing even with greasy or moist products. The B-version adds a perforation blade with bag waste suction on both sides, so trim is removed automatically during the cycle. Evacuation stops at the evaporation point, protecting product quality throughout the process. Dodpfx Aloz Nc Nns Aewc Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Conveyorized chamber vacuum packaging machine (belt) Output: 2–3 cycles per minute Sealing: Bi-active sealing bars, electronic temperature control, adjustable contact pressure Trim removal: Perforation blade with bag waste suction on both sides (B-version) Vacuum control: Evacuation stops at the evaporation point Construction: Stainless steel, all-enclosed

Condition: like new (used), Year of construction: 2025, COLUMBUS MOVE – The space-saving professional vacuum press for maximum flexibility Full performance. Minimal space requirements. The COLUMBUS MOVE was specifically developed for operations wishing to work professionally with vacuum technology—even with limited space available. Thanks to its mobile and compact design, the press can be easily stored after use, freeing up valuable workshop space. Ideal for: * Veneering * Laminating/form gluing * Coating * Curved workpieces * Flexible custom production Your benefits: * Space-saving MOVE system * Mobile and flexible use * Heavy-duty industrial construction * Lifetime guarantee on the machine structure Dwodpfx Aljz Iz Dze Aec * Premium BECKER vacuum pump * Quick-change membrane system * Connection for external vacuum bag * Simple operation and high operational safety COLUMBUS 360° included: With a practical manual, Master Manual, and AI support, you benefit not only from state-of-the-art technology but also from decades of application expertise. Technical specifications: * Usable area: 3050 x 1350 mm * Maximum payload: 1.0 t * Maximum workpiece height: 600 mm * Vacuum pump: BECKER 40 m³ * Weight: 670 kg Particularly attractive for companies seeking flexible production while making efficient use of valuable workshop space. COLUMBUS has been developing professional vacuum technology for woodworking operations for nearly 50 years. Viewing and personal consultation gladly by appointment.

Condition: good (used), Year of construction: 2011, functionality: fully functional, overall weight: 142 kg, total width: 760 mm, total length: 855 mm, total height: 1,985 mm, input voltage: 380 V, type of input current: three-phase, power: 3 kW (4.08 HP), noise level: 60 dB, volume flow: 320 m³/h, Equipment: type plate available, Ringler RI 331 D3-IS-M Atex Industrial Vacuum Cleaner, Chip Collector Power: 3.0 kW, 400 V Year of manufacture: 2011 Atex Zone: 22 Accessories: - Suction hose - Replacement filter - Bag for fine dust Shipping via freight forwarder is possible or collection in 06112 Halle. Very good condition. Used for dry vacuuming in a printed circuit board production facility. Sale to commercial businesses only, excluding any warranty. Dedoz Iqzcjpfx Al Aowc

Condition: used, mileage: 123,000 km, power: 206 kW (280.08 HP), first registration: 06/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: red, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: ABS, air conditioning, electronic stability program (ESP), Manufacturer Scania Model P280 4x2 Simon Moos SLS1648 8.000 l. Kombi Year 2021 Condition Very good Serial Number YS2P4X20005600542 Ref. nr. 268214 Reg. date: Last seen: 25-06-2026 Hk: 280 Km: 123000 Gearbox: Opticruise GRS895 Eurotype: 6 Diesel tank: 1 Tank liter: 350 Rear view camera: ? Air conditioning: ? Cabin type: CP14L Radio: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 315/70R22,5 Cover% left 60 - 80 % Front suspension: Air Suspension rear: Air Wheelbase: 4350 mm. Toolbox: ? Dodpfx Alsz Nurio Aowc Hydraulic system: ? Total weight: 18000 kg. Net weight: 13300 kg. Load capacity 4700 kg. Manufacturer: Simon Moos SLS 1648 Tank capacity: 8000 l. High pressure pump: Pratissoli KF36A High pressure capacity: 120 bar - 120 l/min High pressure pump hours: 475 Vacuum pump: CVS Vacustar W1300 Vacuum capacity: 1300 m3/h Vacuum pump timer: 1241 Remote control: ? Winter circulation: ?

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, Vacuum Press – Ready for Immediate Use | Excellent Condition | Versatile Applications For sale: High-quality vacuum press in excellent condition – ideal for joineries and woodworking companies seeking to work more efficiently and flexibly. This press enables you to: - Perform precise veneering - Carry out form bonding Dsdpfez Iz Dnjx Al Aowc - Shape mineral-based materials and plastics - Achieve efficient production even for single pieces and custom solutions What this means for you: Expand your service portfolio and take on jobs that were previously not feasible or profitable. Technical Specifications: Vacuum Press Pioneer Vertical L Usable area: 3050 x 1350 mm Frame internal dimensions: 3130 x 1430 mm Max. workpiece height: 850 mm Overall dimensions: 3960 x 1640 x 1450 mm Weight: 880 kg Heater Pioneer Heat L Usable area: 2700 x 1100 mm Overall dimensions: 3110 x 1700 x 760 mm Weight: 685 kg Special features: - Easy operation - Low maintenance requirement - Versatile applications - Lifetime warranty (excluding wear parts) - Includes digital user manual and AI support! Inspection and test run possible at any time.

Condition: used, Year of construction: 2017, An unused Fezer sheet metal vacuum lifter is available. Load capacity: 1000kg, max. sheet dimensions X/Y: 3000mm/1500mm, weight: approx. 200kg. An on-site inspection is possible. Dedpfx Aoz Nh R Ssl Ajwc

Condition: like new (used), Year of construction: 2026, functionality: fully functional, volume flow: 100 m³/h, power: 2.2 kW (2.99 HP), Becker U5.101 rotary vane vacuum pump, oil-lubricated Manufacturer: Becker Type: U5.101 Dwodpsz Ikvtsfx Al Asc Suction capacity: 100 m³/h Motor power: 2.2 kW Ultimate pressure: 0.1 mbar (abs.) Includes: gas ballast, oil filter Upon request, the vacuum pump can also be delivered ready for operation, including oil filling, pre-filter (paper filter), motor protection, and phase converter.

Condition: used, mileage: 563,000 km, power: 228 kW (309.99 HP), first registration: 12/2005, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: blue, gearing type: automatic, emission class: euro3, Year of construction: 2005, Equipment: ABS, soot filter, Manufacturer Scania Model P310 4x2 Hvidtved Larsen Flexline 207 Year 2005 Condition Good Serial Number YS2P4X20002012270 Ref. nr. 698111 Reg. date: 14-12-2005 Hk: 310 Dwodpoy Ek Uvefx Al Ajc Km: 563000 Gearbox: Opticruise Eurotype: 3 + particulate filter Diesel tank: 1 Tank liter: 350 Rear view camera: ? Cabin type: CP16 Radio: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 315/80R22,5 Cover% left 80 - 80% Front suspension: Air Suspension rear: Air Wheelbase: 4500 Toolbox: ? Hydraulic system: ? Total weight: 18000 kg. Net weight: 12550 kg. Load capacity 5450 kg. Manufacturer: Hvidtved Larsen Tank capacity: 7000 l High pressure pump: Uraca KD 716G High pressure capacity: 330 l/min 170 bar. High pressure pump hours: 1471 Vacuum pump: Wittig RFW200 Vacuum capacity: 20.600 l/min Vacuum pump timer: 3060 Remote control: ? Water heater: ?

Condition: used, Three-pump vacuum unit with control cabinet for food processing plants This used unit consists of three Bora vacuum pumps, type SAP 450, mounted on a single shared frame. Each pump has a filter housing on top and all three are connected to a common manifold. The accompanying control cabinet holds three Omron Hitachi frequency inverters (JX series, 4 kW, 400 V). It also contains a Moeller controller with display and motor protection switches. Three rotary switches are fitted in the door. The frame stands on adjustable feet. Located in Emmeloord, the Netherlands. Immediately available, price on request. Dwodpfxez Nc Iqs Al Asc More photos and full specifications: / Type: Vacuum unit with three pumps and control cabinet Pumps: 3 × Bora SAP 450, on a shared frame with common manifold Frequency inverters: 3 × Omron Hitachi JX, 4 kW, 400 V Controller: Moeller controller with display, motor protection switches Frame: On adjustable feet

Condition: used, mileage: 465,000 km, power: 279 kW (379.33 HP), first registration: 05/2008, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, gearing type: automatic, emission class: euro4, Year of construction: 2008, Equipment: ABS, soot filter, Manufacturer Scania Model P380 8x2?6 Hvidtved Larsen Flexline 414 Year 2008 Condition Good Serial Number XLEP8X20005199494 Ref. nr. 1438032 Reg. date: 30-05-2008 Hk: 380 Km: 465000 Gearbox: Opticruise GRS905 Eurotype: 4 + Particle filter Diesel tank: 1 Tank liter: 350 Rear view camera: ? Air conditioning: ? Cabin type: CP16 Radio: ? Refrigerator: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 385/65 - 385/65 - 315/80 - 385/65 Cover% left 40 - 60 - 80 - 50% Front suspension: Air Suspension rear: Air Wheelbase: 5300 mm. Dwjdoxzmzzspfx Al Aec Toolbox: ? Total weight: 32000 kg. Net weight: 18650 kg. Load capacity 13350 kg. Manufacturer: Hvidtved Larsen Tank capacity: 14000 l. High pressure pump: Uraca P3-10 High pressure capacity: 127 l/min. 160 bar. High pressure pump hours: 1072 Vacuum pump: Wittig RFW 200 Vacuum capacity: 20.600 l/min Vacuum pump timer: 5116 Remote control: ? Water heater: ?

Condition: used, mileage: 94,000 km, power: 382 kW (519.37 HP), first registration: 08/2015, fuel type: diesel, overall weight: 40,000 kg, axle configuration: > 3 axles, brakes: retarder, color: orange, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, Scania R 520 V8 Suction Excavator 10x4 Retarder Camera Euro 6 Full Service History For inquiries: 0326229 * Condition: Very good * Full service history * Engine hours: 9,972 h * Power: 382 kW / 520 HP * AdBlue * Retarder * ABS * EBS * Rear axle differential lock * PTO (Power Take-Off) Dwsdsyty Sxopfx Al Aoc * Hydraulic system * Air-suspended driver's seat * Driver's seat heating * Axle configuration: 10x4 * Exterior mirrors electrically adjustable and heated * Suspension: Full air suspension (air/air) * Electric windows * Automatic climate control * CD radio / AUX / USB / Bluetooth * Navigation system * Reversing camera * Permissible total weight: 40,000 kg * Roof-mounted beacon / orange * Fog lights * Fuel tank on the left side / aluminium 500 L * Lift axle * Steering axle Body: Suction excavator Manufacturer: RSP Saugbagger Produktions GmbH Type: ESE 32/10-3V-K 2x Radio remote control High-performance suction hose with hydraulically operated boom unit Flexible suction nozzle Hydraulic supports Tyres: 1st axle: 385/55 25% air-suspended 2nd axle: 385/55 40% air-suspended steering axle 3rd axle: 315/70 45% air-suspended 4th axle: 315/70 20% air-suspended 5th axle: 385/55 50% air-suspended lift/steering axle ---- Price: €179,000 + 19% VAT For further questions, you can reach us at the following phone numbers: We speak: German, English, French, Polish, and ????? Errors, mistakes and prior sale excepted.

Condition: used, mileage: 261,013 km, power: 294 kW (399.73 HP), first registration: 12/2013, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 10/2028, color: orange, gearing type: mechanical, emission class: euro5, total length: 10,000 mm, total width: 2,500 mm, total height: 3,700 mm, loading space volume: 15 m³, Year of construction: 2013, Equipment: air conditioning, Internal vehicle number: G400291 Available immediately at our location in Kaufungen. Djdpfx Ajz I Hmzjl Aewc For more information, please contact: * Luis Lucena * Viktoria Sologubova Leistikow 18/1741//11/13 Year of manufacture: 2013 15,000 liters Piston system Remote control URAKA KD-716-G Year of manufacture: 2013 170 bar 478 operating hours CVS VACUSTAR W 1600 R Year of manufacture: 2013 200 bar 2,083 operating hours Errors and omissions excepted We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC COMMERCIAL VEHICLES LTD. We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, Year of construction: 2005, Machine, and good Condition Inspektion in our warehouse Dwsdpfx Aloz Ibw Io Aoc