Steel holder

STANKO

Condition: used, different types available Dodedc A Sbjpfx Ab Tewf

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 164 h, working width: 3,100 mm, operating speed: 8 mm/s, reverse speed: 75 mm/s, overall weight: 10,500 kg, total length: 4,500 mm, total width: 1,700 mm, total height: 2,500 mm, input voltage: 380 V, pressing force: 200 t, power of the servo motor: 15 W, With manual, part list and all available technical documents. Dwedpfx Abevm Elaj Tsf

Year of construction: 1992, condition: good (used), 21 rolls, Ø 80 mm Dwjdeg Iirnspfx Ab Tof strip width: 500 - 1.650 mm strip thickness: 1 - 5 mm

Condition: excellent (used), Year of construction: 2016, Technical Data: Capacity: 4000 x 7 mm Minimum diameter: 550 mm Maximum diameter: 4000 mm Maximum sheet thickness (steel): 7 mm Maximum sheet thickness (stainless steel): 4 mm Maximum edge radius: 300 mm Minimum edge radius: 20 mm Maximum bottom diameter: 4000 mm Minimum bottom diameter: 300 mm Maximum total height of bottom including straight section: 640 mm Maximum diameter of torispherical ends: 3000 mm Minimum diameter of torispherical ends: 300 mm Dedpfx Asw Tq Sisb Tewf Maximum diameter of semi-elliptical heads: 1950 mm Minimum diameter of semi-elliptical heads: 300 mm CE marking Working height: 640 mm Motor power: 15 kW Weight: approx. 5.5 t Accessories: various tools Condition: Very good condition, little used The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are appropriate for its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1986, plate thickness 6,0 mm pressure 18 t cutting angle - upper blade 90 ° blade length 225 x 225 mm voltage 380 V total power requirement 5,5 kW Dwjdpfog Ip Efox Ab Tjf weight of the machine ca. 650 kg dimensions of the machine ca. 1,10 x 0,80 x 1,05 m - Angular stops adjustable

Condition: good (used), Year of construction: 1963, Vertical lathe JUNGENTHAL Type: DK 1400 built in 1963 with 1 axis digital readout. turning diameter max : 1400 mm face plate : 1250 mm Automatic turret head spindle speed : 3,5-180 rpm Dwodpfxsvi Hryo Ab Tef feeds : 0,063 - 3,15 mm/rev rapid traverse : 1800 mm/min Further data see data sheet Machine documentation available . Dimensions : Length 4 m Width 2,4 m Height 3 m Weight 16t Good general condition .

Condition: used, turning diameter over bed 2400 mm turning diameter over slide rest 2200 mm turning length 10000 mm power capacity 185 kW faceplate diameter 1650 mm turning speeds 1,5 -150 U/min max. workpiece weight 70000 kg clamping diameter 1400 mm Technical data Working range Maximum turning diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in the headstock faceplate: 300 - 1,600 mm with special jaws up to 2,050 mm Clamping diameter in the tailstock faceplate: 300 - 1,400 mm Maximum workpiece weight: 70000 kg Main drive, faceplate Faceplate diameter: 2000 mm Faceplate speeds, continuously adjustable in 4 stages: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Drive power of main motor: 185 kW Flange centre point angle: 70° Dwjdpfx Aboxddvns Tjf Supports Travel of the plunge slide: 500 mm Travel of the face slide: 1400 mm Quick adjustment, longitudinal: 2000 mm/min Quick adjustment, face: 800 mm/min Infinitely variable feed, longitudinal: 0.6 - 300 mm/min Infinitely variable feed, face: 0.3 - 120 mm/min Max. cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Faceplate clamping diameter: 1400 mm Flange centre point angle: 70° Quick adjustment: 1250 mm/min Special equipment Copying device for first support Copying length 8500 mm Max. copying depth in one pass 500 mm Boring device: Boring bar 460 x 390 mm Drilling diameter 600 - 1000 mm Maximum drilling depth in one pass 2700 mm At Ks of 200 kp/mm² - s max. = 1.5 mm/rev a = max. chip cross-section 30 mm² at a projection of 1000 mm Reduced chip cross-section with increasing drilling depth A guide ruler for cone turning, adjustment angle up to 8° and a maximum cone length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide ruler for cone turning, adjustment angle up to 15° and a maximum cone length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle box.

Condition: used, Year of construction: 1995, turning diameter over bed slide: 500 mm, Universal lathe Make: ZMM Type 500 Year: 1995 Technical Data Manufacturer: ZMM Sliven Model: Universal 500 Year of manufacture: 1995 Centre distance: 1000 mm Swing over bed ø: 500 mm Spindle bore: 73 mm Dimensions (L x W x H): 2.7 x 1.2 x 1.8 m Weight approx.: 3100 kg Equipment • 3-jaw chuck Röhm ZS 350 mm • Quick-change toolpost • Live center • Coolant pump • Machine lamp All information subject to change. Dwjdswudhuepfx Ab Tef A live demonstration under power is possible at any time in our showroom.

Condition: good (used), Year of construction: 1989, machine/vehicle number: 01-15792, Offer 24194 Technical data: Dwjdpfotylgusx Ab Tof - max. working width 2040 mm - max. material thickness 2 mm - Bending angle approx. 0 - 135 ° - Bending angle lockable with end stop - Upper beam is operated with side hand crank - max. stroke upper beam 85 mm - Max. adjustment of bending beam 80 mm - Bending process is supported by eccentric weight - Space requirement approx. W 3250 x H 1250 x D 450 mm - Weight approx. 1620 kg

Condition: used, Year of construction: 1961, ram hammer weight 750 kg ram hammer stroke 660 mm no. of strokes 100 /min impact energy 2040 kJ distance lower die block / ram gudeway 6600 mm Throat 750 mm steel forging - rectangular up to 240 mm steel forging - diameter up to 270 mm power requirement 75,0 kW weight of hammer 16,5 t weight of anvil 15,5 t Dwedpfxjvuulle Ab Tjf weight 32,0 t dimensions (WxDxH) 3,2 x 1,45 x 3,45 m Forging hammer with pneumatic drive can only be offered without putting into operation in our warehouse video at seller's site before dismantling available