Bench drill

STANKO

Condition: good (used), Year of construction: 1984, functionality: fully functional, Table size 2000 x 650 mm Table longitudinal travel 2000 mm Stone transverse travel 650 mm Max. working height 550 mm Stone scraper integrated in the head Machine weight approx. 15,500 kg Ffsdpfx Asyr Iqmsdpow Dimensions (L x W x H) = 6000 x 2400 x 2900 mm Accessories - Magnetic table - Built-in dresser unit - Wheel with flange - Hydraulic unit - Separate control cabinet Good condition. The machine will be sold due to company liquidation.

Condition: used, Year of construction: 1988, operating hours: 1 h, machine/vehicle number: V 516, total width: 2,000 mm, total length: 7,000 mm, total height: 1,800 mm, operating pressure: 300 bar, pressing force: 90 t, sheet thickness aluminum (max.): 5 mm, power: 11 kW (14.96 HP), empty load weight: 16,000 kg, cutting force: 90 t, year of last overhaul: 2025, Bale size 400x400 mm Force 1 Step 900 KN Fjdpfslhqd Rsx Adpsfw Force 2 Step 900 KN Steel max. 2500-3500 Kg/Std. Aluminium max. 2000 - 3000 Kg/Std. Driving Power 11 KW Arrangement Surface 7x2x2,5 m x m Machine weight 16 to Place: Austria Aviable: 30.01.2025

Condition: used, Year of construction: 1975, STANKO - 7B56 - 1975 Fjdeyrq Iuspfx Adpjfw - used condition as shown on photos - under power, can be tested

Condition: used, Technical details: bore capacity in steel (diameter): 23 mm throat: 250 mm bore stroke: 150 mm Fodpfx Adsynhmmepofw speeds:: 180-2000 U/min spindle taper: MK2 total power requirement: 1,5-2,2 kW weight of the machine ca.: 500 kg

Condition: excellent (used), Year of construction: 2003, Deckel Maho DMU200P Year: 2003 Control Heidenhain iTNC530 Travels X: 2000 mm, Y: 1800 mm, Z: 1100 mm B-axis: 0.001° C-axis: 0.001° Number of controlled axes: 5 Table size 1700 mm x 1400 mm Spindle max speed 12000 rpm Spindle nose SK50 Tool changer 60 Positions Accessories/options: Through spindle coolant, (IKZ) 40 bar Swarf conveyor Touch probe Heidenhain TS642 elektr. Handwheel Heidenhain Fsdpfox Swbcox Adpsfw Tool measuring system Blum Laser

Condition: used, Year of construction: 1987, faceplate diameter 2200 mm swing diameter 2500 mm turning height 1600 mm Fsdpfxsyqty De Adpofw Control Siemens total power requirement 100 kW weight of the machine ca. 35 t vertical lathe with two RAM; faceplate Ø 2000 mm; SPS supported control for storable cycles; RAM/channel 1 two Capto recordings C8 with Internal tool cooling, RAM/channel 2, two Capto mounts C8 with internal tool cooling; Chip conveyor / spindle Z-axis as new The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: repair required (used), STANKO 2 A 554 The machine is in perfect working condition except for the clamping of the boom lifting device and is currently still in operation. The clamping would have to be reassembled and readjusted, all parts are present. For safety reasons, the boom is secured with a tensioning strap, the clamp for the lift is in clamped condition. Technical data: - Drilling capacity 60 mm - Projection 1600 mm - Drill spindle holder MK 5 - Drill spindle stroke 390 mm - Spindle speed, 20 steps 20 - 2000 rpm - Clockwise and counter-clockwise rotation - Feed rate, 12 steps 0.056 - 2.5 mm/rev - Drive 400 V / 12.8 kW - Clamping of the arm and drilling unit electromechanical - Distance machined machine bed - drilling quill - min. approx. 900 mm - max. approx. 1600 mm - usable machine bed with 4 T-slots 950 x 1700 mm - Coolant device - Cube table - Space requirement approx. W 2600 x H 3000 x D 1000 mm - Weight approx. 4500 kg Ffodpfjtpu Tqjx Adpsw

Condition: used, turning diameter 260 mm turning length 280 mm control OSP500 1. Machine Specifications Item Unit Specification Number of controlled axes – 2 Fjdewm Rrdepfx Adpjfw Swing diameter over bed mm Ø 450 Swing diameter over slide mm Ø 350 Swing diameter over cross slide mm Ø 300 Maximum turning diameter × length mm Ø 260 × 280 Spindle diameter mm Ø 100 Spindle nose – JIS A2-6 Spindle taper mm Ø 70 × 1/10 Spindle bore mm Ø 62 Spindle speed range rpm 35 – 4,000 Z-axis travel mm 320 Z-axis rapid traverse mm/min 20,000 X-axis travel mm 155 X-axis rapid traverse mm/min 15,000 Turret type – V Number of tools – 8 (optional 12) Tool size (external turning) mm ¦ 25 Tool size (internal turning) mm Ø 40 (optional Ø 32)

Condition: excellent (used), Table length: 8000mm Table width: 2500mm Between columns: 3100mm Weight of workpiece: 65t Ffsdpeyn Awmjfx Adpsw Weight: 127t

Condition: used, functionality: fully functional, total height: 1,715 mm, total width: 735 mm, total length: 1,475 mm, power: 3.3 kW (4.49 HP), overall weight: 3,300 kg, Forging hammer is in excellent condition and could be checked under power at any time. Nominal mass of drop parts, kg 75 Impact energy, kj 1,4 Max number of blows per minute 210 Working zone daylight, mm 300 Die impression size, mm 130 x 63 Motor capacity, kW 3,3 Ffedpfjxwuv Eox Adpjw Hammer dimensions, mm 1475 x 735 x 1715 Hammer weight with anvil block, kg 3300

Condition: excellent (used), cutting height (max.): 120 mm, cutting width (max.): 700 mm, Right-hand machine, machine number 188 Electrically adjustable hydraulic width adjustment Infinitely variable feed rate from 0-80 m/min 37 kW drive motor with V-belt pulley, motor tensioning rail, Various saw heads, shims, and saws Fedsv Raqxepfx Adpjfw Infeed table with individual trestles Fixed outfeed table The machine has been completely overhauled and is in excellent condition.

Condition: used, Slotting head for milling machine, milling head, CCCP / UDSSR STANKO type 1502 No: 200 Year of manufacture 1974 Stroke size: max. 60 mm Stroke rate: approx. 200 - 500 strokes/min. Tool holder: 12 x 17 mm with clamping plate Hole spacing machine flange plate: 245 x 185 mm Mounting hole: Ø 17 mm Centering diameter on the machine flange plate: 190 mm - Stroke size adjustable via eccentric adjustment Fsdpfx Asd Dk A Aodpsfw - The drive is like the normal vertical head from the machine gearbox - Drive via driver, centric in the centering diameter - Degree scaling on the flange plate +/- 45° steplessly pivotable - This grooving head is flange-mounted in place of the normal vertical milling head (mounting in place of the vertical milling head, milling head) Weight: 42 kg good condition Slotting head bearing number 58166 and vertical milling head bearing number 58164 from identical STANKO milling machine.

Condition: used, Year of construction: 1986, total height: 2,900 mm, total width: 1,450 mm, total length: 1,500 mm, Empty weight: 5.500 kg Price: On request - Year: 1986 - Documentation available: Yes - CE certificate present: No - Serial number: 88 09-86 - Drive system: Conventional - Press force [ton]: 63 Ffodeylb Edopfx Adpjw - Min. stroke [mm]: 10 - Max. stroke [mm]: 100 - Table length [mm]: 710 - Table width [mm]: 480 - Ram width [mm]: 320 - Height adjustment [mm]: 80 - Transport dimensions: 1500mm x 1450mm x 2900mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2003, NAKAMURA TOME SUPER NTJ CNC LATHE MAKE NAKAMURA TOME, MADE IN JAPAN MODEL SUPER NTJ YEAR 2003 CONTROL FANUC 18 iT B CHUCK SIZE 210.0 mm MAX TURNING DIA. 200.0 mm BETWEEN CENTRES 780.0 mm DRAW TUBE DIA. 80.0 mm TRAVELS: X AXIS: 750.0 mm Z AXIS: 130.0 mm TURRET 2 x 12 STATIONS SPINDLE SPEED Up to 5,000 rpm SPINDLE BORE 65.00 mm SPINDLE NOSE A2-6 PLUS CNC SHORT MAGAZINE BARFEED TURRET TOOLING Ffjdsv I Tx Ropfx Adpew SWARF CONVEYOR MANUALS

Condition: used, Year of construction: 1989, centre distance 2000 mm 600 weight of the machine ca. 3,2 t Fjdpfx Adeyi Hvvjpjfw Passage 49 mm Digital Lynette