Electronics / Drive technology

STÖBER MDS5040A/L - NEU

Condition: used, Year of construction: 2014, Industrial robot Manufacturer: Kuka Model: KR210 R3100 ultra with 4.5 m linear axis Year of manufacture: 2014 Reach: 3,196 mm Weight: 1,154 kg Payload: 210 kg Kuka Control System KRC4 Year of manufacture: 2014 Weight: 163 kg Software: KSS 8.5.4 Kuka TouchPad KCP4 Kuka connecting cables Kuka linear axis Type: KL1500-3 T Year of manufacture: 2013 Length approx. 4.5 m Dsdpfx Ajxuwlwekcocg Travel stroke approx. 3.5 m KRC4 cable drag chain Weight: 2,200 kg ä17426

Condition: good (used), Year of construction: 2019, functionality: unexamined, machine/vehicle number: 10021711, overall weight: 1,400 kg, load capacity: 210 kg, controller manufacturer: KUKA, controller model: KRC 4, 1. Robot Arm Dcjdjv Tyw Dspfx Akceg • Manufacturer: KUKA Deutschland GmbH • Type: KR 210 R3100 Ultra (KR210R3100 ULTRA C4 FLR) • Item number: 10021711 • Serial number: 1239324 • Year of manufacture: 04/2019 • Weight: 1154 kg • Payload: 210 kg • Reach: 3096 mm • Country of origin: Germany 2. Robot Controller • Type: VKR C4 • Item number: 1106074 • Serial number: 3007941 • Year of manufacture: 10/2019 • Weight: 168 kg • Supply voltage: 3x400V • Mains frequency: 50/60 Hz • Full load current: 22 A • Mains fuse: 25 A • Country of origin: Hungary 3. Extraction system • Manufacturer: ESTA Apparatebau GmbH & Co. KG • Type: Small Dust Collector OM-8 • Serial Number: 19002523 • Year of Manufacture: 2019 • Voltage: 400 V • Power: 0.55 kW • Current Consumption: 1.4 A • Noise Level: 10A [dBA] • Volume Flow (Max.): 600 m³/h • Weight: 60 kg • Protection Class: IP44 • Max. Negative Pressure: 1600 Pa • Country of Origin: Germany 4. Equipment & Special Features • Teach panel with connection cable (visible in the control cabinet) • External electrical/control cabinet installation with Ethernet and safety connections (typical for KUKA) • Additional attachment mounted on the robot flange, for special applications (e.g. B. Grinding or deburring applications) • Base for stationary floor mounting • Control and power cables pre-assembled and integrated • System is stored on pallets and ready for transport

Condition: new, Year of construction: 2022, functionality: fully functional, turning height: 2,000 mm, workpiece weight (max.): 12,000 kg, turning diameter over cross slide: 2,500 mm, turning diameter: 2,500 mm, faceplate diameter: 2,000 mm, total height: 7,260 mm, total width: 6,280 mm, total length: 4,500 mm, rotational speed (max.): 200 rpm, rotational speed (min.): 1 rpm, torque: 40,400 Nm, spindle speed (min.): 1 rpm, warranty duration: 24 months, overall weight: 45,000 kg, faceplate torque: 40,400 Nm, Equipment: documentation/manual, rotational speed infinitely variable, Vertical turret lathe in flat-guided design with extensive full equipment: WITH MILLING FUNCTION - Milling spindle 2000rpm SK50 22 KW - C - axis 0.001 degrees - Complete housing - Chip conveyor - Internal coolant supply - Fanuc control - 24 tools - 12 milling tools - Manual Guide I - Tool holder package - Electronic handwheel - Signal light - Manual 3-jaw faceplate 2000mm - Renishaw tool measurement - Renishaw workpiece measurement - Glass scales in X and Z axes - 24 month guarantee Dcodpfjvtytxox Akceg

Condition: new, Year of construction: 2024, cutting height (max.): 150 mm, cutting range round steel at 45°: 108 mm, cutting range round steel at 90°: 108 mm, BERG+SCHMID GBS 218 Eco AutoCut double mitre bandsaw Speed: 25-80 m/min - Mitre left 60° - For cutting steel, stainless steel and aluminum profiles - Quick-clamping vice with quick-clamping device a. - Built-in blade tension control b. - Saw blade guide made of carbide c. - Electric automatic cooling system - Machine base (supplied disassembled) The AutoCut system consists of: - Hydraulic cylinder, feed control, spring assembly, limit switch and enables three work sequences: 1. automatic lowering of the saw frame via hydraulic cylinder with infinitely adjustable feed control valve and limit switch at the end of the cut 2. high-speed lowering of the saw frame from the rest position up to the workpiece, then switching to normal saw feed 3. manual operation - hydraulic cylinder works as a brake cylinder Saw blade dimensions: 2455x27x0.9mm Dcsdpfx Akot I R Edscjg Further accessories such as saw bands, roller conveyors, measuring stops, minimum quantity lubrication etc. available on request! Delivery time: ex stock Waiblingen Beinstein

Condition: used, Year of construction: 2002, cutting diameter / mm saw band length / mm cutting width / mm KASTO tec AC5 automatic band saw Sawing capacity: 23kW Machine weight: 5.9t Year of manufacture: 2002 Cutting ranges in mm approx.: Round: 530mm Square: 530x530mm Flat: 530x630mm Smallest dimension to be sawn: 10x10 mm Minimum length to be sawn: 6 mm Minimum residual length, single cut: 10 mm Minimum residual length, automatic mode: 35 mm Automatic material feed, single, max. (standard): 600 mm Dedpfx Ajxrg E Iekcscg Automatic material feed single max. (optional): 1500/3000 mm Multiple material feed: 9999 mm Machine roller conveyor length: 1568 mm Max. piece weight: 2275 kg Cutting speed: 12-120 m/min (infinitely variable) Cutting feed: continuously adjustable Material feed: with ball screw Automatic feed: with horizontal clamping device Material clamping: hydraulic, continuously adjustable Clamping force Machine clamping device: 200-1000 daN Feed clamping device: 200-2000 daN Saw blade clamping: hydraulic, factory-set Saw blade cleaning: by easily replaceable double brush, driven by a hydraulic motor. Coolant tank volume: approx. 185 l Pump capacity: approx. 25 litres/min On request, we can offer you the 4 immediately available saw blades at an additional cost.

Condition: new, Year of construction: 2021, functionality: fully functional, Stock machine "NEW" – available at short notice! (Subject to prior sale) Control: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine Table: Table size: 950 x 550 mm Load capacity: 800 kg T-slot width: 18 mm Number of T-slots: 3 Distance between T-slots: 150 mm Dcodpfx Akeifn N Njcjg Travel axes: Travel X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 – 700 mm Linear guides & speeds: Ball linear guides in X/Y axes Roller linear guide in Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feedrate during milling: 0 – 10,000 mm/min Smallest increment: 0.001 mm Tool magazine (CAM-Type) / changer: Number of magazine pockets: 30 System: random access Max. tool diameter: Ø 75 mm Max. tool diameter with adjacent pockets free: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/cont.): 18.5/11 kW 15,000 rpm direct-drive spindle Spindle oil cooler Coolant, chip, and compressed air management: Coolant system incl. 300 liter tank and pumps External coolant around spindle Chip augers right and left in machine bed Compressed air nozzle at spindle (M32/M33) Compressed air through spindle (M38/M39) Compressed air and coolant gun Other features: Swiveling operator panel Electronic handwheel (wired) Central lubrication oil/air Full enclosure Work light Heat exchanger at control cabinet Auto power-off function Hand tool set Signal lamp Transformer 400 VAC, 50 Hz CE declaration of conformity according to European directives Electrical and pneumatic requirements: Electrical connection: 36 kVA Required pneumatic input pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required installation area: W3,160 x D3,000 x H3,000 mm (incl. chip conveyor ejection to the left) Machine weight: approx. 5,400 kg (net) Available special equipment: Spindle: - Direct-driven spindle SK-40, 15,000 rpm - Drive power (30min/cont.): 18.5 / 15 kW, (FANUC motor) Tool magazine / changer: - Drum-type tool magazine with 30 pockets, DIN69871, SK-40 Rotary or additional axes: - Preparation for 4th axis (FANUC controls), incl. wiring and Harting connector, without axis drive Coolant, chip, and compressed air management: - Bed flushing - Through-spindle coolant pump, 20 bar pressure, for direct-driven spindles - Includes cartridge filter - Belt-type chip conveyor including chip cart (chip discharge at front, to the left side of the machine) Measuring and monitoring systems: - RENISHAW OMP-60 probe with infrared transmission system for workpiece measurement, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ tool laser measurement system and tool breakage monitoring in the machine, incl. bracket - Auto-door (side door) - Pneumatic interface for workpiece clamping - Clamping devices as shown With RoboJob Mill Assist 25kg (Year of construction 2025 – NEW) - Full enclosure - Double gripper Available immediately

Condition: new, Year of construction: 2025, functionality: fully functional, Specialised press built from the ground up for briquetting of iron, steel and similar alloys. Includes integrated oil collection pads. Does not include packing table – only briquette guides (slides). Comes with see through bunker doors & oil heating elements as standard. Machines are controlled by Siemens KTP-400 touchscreens. 2nd generation available for purchase from February 2024. For this press please first contact us! Technical Data : Throughput: Up to 600 briq/h* Main motor: 30kW Infeed motors: 2.6kW Cooling system: 1.6kW Total power: 34.2kW Oil tank: 260l Filters: 4 Length: 2000mm Dcjdpetmugcofx Akcog Width: 2000mm Height: 2200mm Weight: 3500kg Briquette size: 40-110, D80mm Warranty: 2 years / 2 000 workhours

Condition: excellent (used), Year of construction: 2019, CNC lathe DOOSAN Puma 2600SY II with Siemens control; Thermal sensors for highest precision; Y-axis; Sub-spindle with collet chuck; Spindle bore 80 mm (main spindle); All axes are flat guideways – suitable for heavy-duty machining; Chip conveyor, tool setter, parts catcher with belt, coolant gun, extraction system; 70 bar high-pressure coolant system; Various fixed and driven tool holders. Dcjdpfx Aksy Amflocog

Condition: excellent (used), Year of construction: 2008, travel distance X-axis: 3,000 mm, travel distance Y-axis: 825 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 48,000 m/min, rapid traverse Y-axis: 80,000 m/min, rapid traverse Z-axis: 48,000 m/min, table width: 835 mm, table length: 3,500 mm, table load: 3,500 kg, 1 Axis CNC Swivel head, infinitely variable Axis drive with ball screw drive Roller linear guides in all axes Direct path measuring systems Full work area encosure with roof Chip conveyor Coolant unit X - Travel: 3000mm Y - Travel: 825mm Z - Travel: 1100mm B - Axis: - 3 to + 105° Table Length: 3500mm Table Width: 835mm Table load: 3500 Feed rate X-Axis: 48000mm/min. Feed rate Y-Axis: 80000mm/min. Feed rate Z-Axis: 48000mm/min. Dsdpfx Akjwyv Nzscscg Spindle Taper: HSK 100ISO/Bt/Mk Power on spindle: 37kW Speeds / ranges: 8000Rpm ATC / revolver: 40 Coolant through spindle / Bar:25 Number of controlled axis: 4 Chip conveyor: Yes Coolantsystem: Yes Length: 8000mm Width: 3800mm Height: 3800mm

Condition: new, Year of construction: 2026, CORMAK ZX 40BPC is a solid metal drilling and milling machine. Possibility of head rotation +/- 90 degrees of spindle, possibility of head rotation +/- 90 degrees, automatic spindle feed, right and left rotation, large table, liquid cooling, automatic table feed in the x axis, powerful engine, ability to drill up to 40 mm. Rotational speed up to 2500 rpm Machine characteristics Dedpfxsvxhfme Akcjcg HEAVY STABLE CAST IRON AUTOMATIC SPINDLE FEED ADJUSTABLE HEAD HEIGHT MASSIVE CROSS TABLE WITH PRECISELY GRINDED SURFACE DOVtail-shaped guides QUIET OPERATION THANKS TO GROUND GEARS LEFT AND RIGHT ROTATIONS ROTATING HEAD +/- 90° Technical data Max. drilling size (steel/cast iron) 32/40mm Face milling width 80mm End milling width 22mm Spindle extension 125mm Spindle taper MT4 Spindle speed (1400 rpm motor) 50～2500min-1 Maximum distance of the spindle tip from the table 735mm Maximum distance of the spindle tip from the base 1245mm Distance of the spindle from the column surface 272 mm Dimensions of the work table 730x210mm Base dimensions 690x520mm Engine 1.3/1.8kW Cooling engine 40W Dimensions 1200x1000x1910mm Weight 440 kg