Horizontalbandsäge

Behringer HBP310-523GA

Year of construction: 2008, condition: ready for operation (used), Sanding range: 2000x900mm, transverse movement: 875mm, longitudinal movement: 2450mm, distance table to spindle center: 845mm, magnetic clamping plate dimensions: 2000x800mm, max. table load: 2.3t, feed rate longitudinal axis: 1000-30. 000mm/min, feed transverse axis: 0,01-2000mm/min, feed vertical axis: 0,001-1500mm/min, grinding wheel dimensions: 500x100x203,2mm, power grinding spindle motor: 22kW, length: 6800mm, width: 3450mm, weight: 13t. On-site inspection is possible. Isdeuyk N Ispfx Ag Ioat

Year of construction: 1997, condition: ready for operation (used), Wire diameter (single wire): 6mm-14mm, wire diameter (double wire): 6mm-10mm, maximum bending angle: 180°, motor power: 22kW, feed rate: 1.5m/s, bending speed: 1000°/s, cutting time: 0.4s, hydraulic tank volume: 300l. Machine dimensions X/Y/Z: approx. 4900mm/1640mm/2200mm, weight: approx. 3300kg. Control system defective. Documentation available. On-site inspection is possible. Isdpjuwrv Dofx Ag Isat

Condition: excellent (used), Year of construction: 2012, Model Amada HFE M2 220t 4m, 8 axis Press Brake Year 2012 Tonnage 220 tonnes Max. Bend Length 4280 mm Stroke Length 200 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 195L Motor Power Weight 17450 Kg Dimensions Iedpov S U Izjfx Ag Ieat Machine Length 5070 mm Machine Depth 2075 mm Machine Height 3085 mm Distance Between Side Frames 3760mm Beam width 180 mm Table height 960 mm Open Height 470 mm Throat Depth 420 mm

Condition: excellent (used), Year of construction: 2012, Voortman V613 / VB1050 Split System CNC Drilling / Sawing Line – Year 2012. Rotating Spindle. Automatic Tool changer. 24 metres In-Feed to VB1050. 24 metres Out-Feed to V613 CNC Drilling line. 24 metres Out-Feed. Roller Feed. VACAM CNC Control. Short piece removal. Iaedev U Ea Hepfx Ag Ijt

Condition: new, Year of construction: 2025, Effective Tube Cutting Length: 6500mm/9200mm Laser Output Power: 6000w/3000w/2000w/1500w Effective Round Tube Cutting Diameter: Φ20-230mm Effective Square Tube Cutting Diameter: □20*20-□160*160mm Edge Length: 20-170mm Outer Circle Diameter: ≤230mm Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Warranty: 3 years Power supply: 110V/220V/380V 50Hz/60Hz 1.Bigger than Bigger The maximum cutting diameter of T series is 30%longer than the mainstream products in the market ; The maximum cutting weight is 100% heavier than the mainstream products in the market. 2.Chuck position control, torque control function The position control CNC self-centering chuck with independent intellectual property rights can automatically clamp material according to the input tube size; Position monitoring in torque mode to ensure that the thick tube is not loosened and the small tube is not deformed;Brand new dust-proof structure, long-lasting use without lagging. 3.Edge-seeking, center-finding Brand new function of edge-seeking, center-finding. Optimized edge-finding method and algorithm, higher cutting precision and stability Iasdpfxeg Dgbhj Ag Ijt

Condition: good (used), Year of construction: 1962, High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine -Clamping table: 400 x 1100 mm Iaedpfx Agsirax Us Iot -Projection: 930 mm -Taper mount: MK4 -Engine power: 1.35/1.8 kW -Speed: 41-1700 rpm -Columns: Ø 200 mm -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg

Condition: excellent (used), Year of construction: 2007, operating hours: 8,000 h, functionality: fully functional, turning length: 750 mm, turning diameter: 330 mm, spindle bore: 41 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 1 rpm, spindle motor power: 11,000 W, quill diameter: 50 mm, quill stroke: 110 mm, turning diameter over bed slide: 435 mm, overall weight: 1,400 kg, center height: 165 mm, Equipment: documentation/manual, rotational speed infinitely variable, For sale: cycle-controlled WEILER E30X750 CNC lathe with Siemens 810 D control. Manufacturer/Model: WEILER E30x750 Year of manufacture: 2007 Control: Siemens 810 D Condition: Good, fully functional Location: Austria (Graz) Inspection: On site or via video call by arrangement Pictures/Video: Additional photos and videos of the machine in operation available upon request. Power-on hours (machine energized): 26,492 h The actual operating hours are significantly lower. Based on experience, spindle run time (actual turning) accounts for approx. 30% to 50% of this (i.e. approx. 8,000 to 13,000 hours). Technical specifications: Working area: Center height: 165 mm Swing diameter over bed: 330 mm Swing diameter over cross slide: 160 mm Center distance: 750 mm Lathe spindle: Spindle nose DIN 55027 / DIN ISO 702-3: Size 5 Spindle bore: 40.5 mm Spindle diameter at front bearing: 70 mm Max. torque at spindle: 180 Nm Main drive: Drive power 100% / 60% duty cycle: 9 / 11 kW Speed range: 1–4,500 rpm Number of speeds: stepless Feed / rapid traverse Feed drive: Three-phase AC feed motors Feed range (stepless): Longitudinal: 0.001–50 mm/rev (Note: also specified 0–20 mm/rev) Face: 0.001–50 mm/rev Feed force: Longitudinal: 6,000 N Face: 3,000 N Max. rapid traverse speed longitudinal/face: 8 / 4 m/min (Note: also specified 10 / 7.5 / 5 / 3.5 m/min) Thread cutting range: Metric threads: 0.1–2,000 mm Inch threads: 112–1/64 tpi Tailstock / quill: Iasdovphv Tepfx Ag Iet Quill diameter: 50 mm Quill stroke: 110 mm Internal taper DIN 228: MK 3 Dimensions / weight: Machine weight: approx. 1,400 kg Dimensions (L × W × H): 1,800 × 1,350 × 1,700 mm Interested? Contact us for further information or to arrange a viewing appointment.

Condition: good (used), Year of construction: 2010, functionality: fully functional, operating hours: 15,996 h, input voltage: 400 V, overall weight: 6,750 kg, 1000 KN Max. stroke: 200 Weight: 6750 Noise level: 74 dB Year of manufacture: 07/2010 Voltage: 400 V / 50Hz Iodpjtwliwefx Ag Ieat Rated current: Current operating hours: 15,996 hours with manual angle measurement and correction system with safety laser UVV inspection on a regular basis / maintenance always carried out by Amada on a regular basis Accessories: Tool die: 2 pieces UKB 20.478 V8/12 30° 835mm 3 pieces UKB 20.344 V4/V7 88° 835mm Tool holder: 4 pieces UKB substructure for double V die 20.287 + 60.919 835mm Bending swords: 5 pieces UKB 10.261 H100 R0.6/90° 2 pieces UKB 11.158 H80 R0.6/30° 2 pieces UKB 11.200 H66 R0.8/90° Other: Light barrier in need of repair (new price approx. €4500) – separately as a replacement as an attachment (has been renewed) The machine can be inspected under power in DE84051 Mettenbach by appointment. Sale only to commercial customers and with exclusion of any warranty!

Condition: excellent (used), Year of construction: 2010, operating hours: 3,624 h, functionality: fully functional, travel distance X-axis: 398 mm, travel distance Z-axis: 1,250 mm, rotational speed (max.): 3,000 rpm, We offer in good condition Gildemeister NEF 600 with Heidenhain control, please note customer removes 3-jaw chuck. Machine will be sold without 3-jaw chuck. Iedpfxexrg S Io Ag Isat Technical Data: Turning diameter: 600mm Turning length: 1190mm Main spindle: Speed range – main spindle: 0 – 3,000 rpm Drive power – main spindle: 39.4 / 27.5 kW Max. torque: 430 Nm Spindle diameter at front bearing: 100 mm Spindle bore: 90mm Max. bar diameter: 75mm Turret: Number of tool stations: 12 pos - VDI 40 Travel: X-axis: 398mm Z-axis: 1250mm Tailstock: Tailstock travel: 1150mm

Condition: used, Year of construction: 2008, Weiler Primus VC Universal Lead and Feed Screw Lathe Condition: Used Year of manufacture: 2008 Technical data Centre height: 140 mm Centre distance: 500 mm Spindle bore: 40 mm Bed width: 205 mm Infinitely variable speed: 30 - 4000 rpm Motor power Main drive rated power: 4 kW Tailstock taper: Taper DIN 228, MK 3 Quill stroke: 85 mm Iedjyuy D Repfx Ag Ioat Dimensions Weight: approx. 800 kg Dimensions (LxWxH): approx. 1600 mm x 950 mm x 1700 mm Equipment / Accessories Siemens SICOMP IMC 05 3-jaw chuck 4-jaw chuck Quick-change tool post system Multifix with 6 holders Bed stop Drill chuck with taper arbor Collet chuck Large collet set Fixed and travelling steady rest Coolant system Emergency stop switch Machine light Change gear set Operating tools