CNC lathe

SMEC SL 2000 M

Condition: used, Year of construction: 2023, controller manufacturer: Siemens, controller model: 828D - ShopTurn, _____ Description: Year of manuf. : 2023 Control : Siemens 828D - ShopTurn Turning diam. : 360 mm Turning length : 520 mm Main spindle: Technology:Belt spindle Speed:6,000 rpm Power (max.):18.5 kW Kedpfx Ajxybxxeg Aedw Bar capacity:52 mm Workpiece clamping:3-jaw chuck, Samchully MH-206 V1 Tool holder: Technology:12-station turret Tool holder:BMT55 Tool drive:5,000 rpm Features/Accessories: Chip management:Chip conveyor Coolant management:IKZ pump with oil skimmer and high pressure, 10 bar Tool measurement:Automatic measuring arm Automation:Prepared Finished part removal:Parts catcher with collection box Setup operation:Electronic handwheel

Condition: excellent (used), Year of construction: 1997, High-Performance 3-Bed CNC Lathe Manufacturer: Gurutzpe – Spain Model: B 1400/3 x 8000 Year of manufacture: 1997 Control: NUM Max. swing diameter over bed: 1,420 mm Center height: 710 mm Kodpew Snu Eefx Ag Aedw Max. turning diameter over cross slide: 1,150 mm Max. turning length: 8,000 mm Chuck spindle power: 75 HP Chuck speed: up to 600 rpm (4-speed gearbox) Chuck torque: 16,000 Nm Rapid traverse X/Z: 5,000 mm/min X-axis travel: 850 mm Z-axis travel: 8,000 mm Turret with automatic 4-position changer Max. workpiece weight without steady rests: 14,000 kg with 1 steady rest: 17,000 kg, with 2 steady rests: 19,000 kg Machine equipment: – 1 x travelling steady rest – 2 x fixed steady rests – 1 x chip conveyor

Condition: good (used), Year of construction: 2017, operating hours: 900 h, functionality: fully functional, turning length: 520 mm, turning diameter: 372 mm, TECHNICAL DETAILS Turning diameter over bed: 570 mm Max. turning diameter: 372 mm Max. Turning length: 520 mm Chuck: 152 mm (203 mm) Spindle speed: 6000 (45000) rpm Bore diameter: 60 mm (68 mm) Travel (x/z): 215 mm / 562 mm MACHINE DETAILS Year of construction: 2017 Weight: 4000 kg Operating hours: 849 h (as of November/December) EQUIPMENT - Control system: Siemens Sinumerik 820 D incl. Operate - 3 jaw power chuck - 12-fold tool changer with driven tools - Automatic tool measurement - parts catcher - programmable tailstock - oil skimmer - Work area lighting - 2x WTO drilling and milling unit, straight BMT 55 - 2x WTO drilling and milling device, angled BMT 55 - 1x facing holder 25x25 mm Ksdpfxerpiuyo Ag Aedw - 3x facing and longitudinal turning holder - 4x universal combination holder - Chip conveyor

Condition: excellent (used), CNC lathe Smec PL2000M, year 2021, C-axis, driven tools, 8-inch chuck, 65 mm bar passage Kjdpfow Hukkjx Ag Asdw

Condition: used, Year of construction: 1980, max. wheel diameter 2500 mm gear width 1200 mm max. module 32 min. module 3 total power requirement 25 kW weight of the machine ca. 60 t dimensions of the machine ca. m Gear , min. / max. 180 / 2,500 mm Module 3 - 32 Helix angle, max. 10 - 35 ° Gear width for straight gears 1,200 mm Stroke length, approx. 100 - 1,200 mm No. of strokes 80 - 350 /min Stroke position adjustable 300 mm Stroke speed 4 - 40 mm Max. weight of workpiece, approx. 18,000 kg Min. / max. no. of teeth 16 / 576 Table size x bore 1,400 x 500 mm Grinding wheel Ø, approx. 500 mm Grinding wheel peripheral speed 34 m/s Total electrical load, approx. 45 kW - 380 V - 50 Hz Weight of machine, approx. 60,000 kg Accessories / Special Features: * Hydrostatic guides in grinding slide, table and in all other guideways. * Completely covered working area with sliding doors. * Automatic grinding process for various cycles, with settings for roughing, finishing, fine finishing and automatic dressing cycle after preset number of teeth. * Profile correction is possible via appropriate dressing, as well as additional movement of grinding slide (depth and width crowning). * Approx. 50 change gears. * Grinding slideTilt display device. * Large coolant device with band filter and oil mist exhaust. * Separate switch cabinet. * Separate hydraulic unit. * Separate oil cooling unit. Condition : Very good. Machine can soon be inspected in our showrooms. It is not under power at present. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. The machine comes directly from a first class gear factory, where it was grinding Quality 5 - 6. Grinding diagrams are available. This type and quality of machine is rarely available. Kdedot Hwqqspfx Ag Aow Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, USED Taiwan Takisawa model EX-108 high performance 2-Axis CNC lathe. Serial Number CA11E80453 Year 2000. NOTE THIS IS A 2 AXIS MODEL EX108 NOT A 3 AXIS EX308. • Heavy Cast Iron Slant Bed Construction • Fanuc 21iT CNC Control • 4-Track Heavy Duty Linear Guideways • High Speed Servo Turret • Tool Setting Device • 8” 3-Jaw Hollow Spindle Hydraulic Chuck • Parts Counter • Toolholders included Max. Swing Over Bed - 400 MM Max. Swing Over Cross Slide - 320 MM Distance Between Centres - 645 MM Standard Turning Diameter - 216 MM Max. Turning Diameter - 320 MM Max. Turning Length - 530 MM Bar Capacity - 52 MM X-Axis Stroke - 180 MM Z-Axis Stroke - 530 MM Spindle Speeds - 60 – 4000 RPM Spindle Nose - A2 – 6 Kjdpfx Agst E Hvgo Ajdw Spindle Bore - 63 MM Turret Type - 12 Station Tailstock Stroke - 435 MM Tailstock Quill Stroke - 100 MM Tailstock Quill Taper - 5 MT Rapid Traverse (X & Z) - 20 & 24 M/Min Jog Feed Rate (X & Z) - 0 – 1260 MM/Min Spindle Motor - 7.5 / 11 KW Electrics - 415V,3PH,50HZ Floor Space - 2240 MM X 1645MM Machine Weight - 4300 KGS

Condition: used, Year of construction: 2007, functionality: fully functional, travel distance X-axis: 3,100 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 3,000 rpm, table length: 1,800 mm, table width: 2,000 mm, feed length W-axis: 700 mm, workpiece weight (max.): 12,000 kg, milling spindle length: 700 mm, FPT CASTEL RED HEIDENHEIN TNC 430. Built in 2007. X=3100mm Y=2000mm Z=1000mm Table 2000 x 1800 mm, 12 Ton Cooling through spindle. Kdjdpowdiu Eefx Ag Asw X Column travel 3,100 mm Y Headstock vertical travel 2,000 mm Z spindle stroke 700 mm W Column in spindle direction 1,000 mm Spindle diameter 130 mm Spindle diameter ISO 50 Spindle speed 3000 rpm Spindle motor 37 kW Rotary table size 1,800 x 2,000 mm Table load 12 tons C-axes 360,000°

Condition: ready for operation (used), max. wheel diameter 150 mm gear width 1 - 200 mm max. module 4 min. module 1 control Sinumerik 840 D Kdsdpovzhg Nefx Ag Aow table diameter 140 mm maximum axial offset 200 mm milling tool taper ISO 40 diameter of hob max. 130 mm cutter length max. 220 mm milling spindle speeds (infinitely variable) 300 - 1200 U/min shifting max. 170 mm milling head -swivable +/- 45 ° feed speeds 1 - 1500 mm/min rapid travel speed 3000 m/min max. workpiece diameter im Magazin: 150 mm total power requirement 50 kW weight of the machine ca. 8,5 t dimensions of the machine ca. 4,7 x 3,6 x 2,6 m Used gear hobbing machine, Pfauter, new in 1992 completely overhauled in 2023 by the specialist company SerWeMa, with Siemens Sinumerik 840 D control system and workpiece magazine.

Condition: excellent (used), Year of construction: 2014, operating hours: 2,315 h, functionality: fully functional, turning length: 500 mm, turning diameter over cross slide: 400 mm, turning diameter: 320 mm, spindle motor power: 15,000 W, spindle speed (min.): 35 rpm, spindle speed (max.): 50,000 rpm, spindle bore: 75 mm, travel distance Z-axis: 580 mm, rapid traverse X-axis: 33 m/min, rapid traverse Z-axis: 33 m/min, total height: 1,700 mm, total length: 2,630 mm, chuck outer diameter: 210 mm, total width: 1,700 mm, bar diameter (max.): 66 mm, quill stroke: 500 mm, swing diameter over cross slide: 660 mm, spindle nose: 6, overall weight: 4,500 kg, MAZAK QUICK TURN 200 Smart Operating hours: Automatic cycle: 2,330 hours Condition: Very good condition, regularly serviced and meticulously maintained! Capacity & Working Area Max. swing diameter: D 660 mm Max. turning diameter: D 350 mm Max. bar capacity: D 66 mm Max. machining length: 520 mm Main Spindle Max. spindle speed: 5,000 rpm Spindle nose: JIS A2-6 Rated power (40% duty cycle): 15 kW Max. torque: 233 Nm Turret Number of tool stations: 12 Tool cross-section: 25 mm (external), 40 mm (internal) Feed Axes Rapid traverse (X / Z): 30 / 33 m/min Travel (X / Z): 180 mm / 550 mm Tailstock Mount: MT NC axis, pressure via M-codes Dimensions & Weight Machine dimensions (L x W x H): 2,630 x 1,710 x 1,700 mm Weight: 4,500 kg (without chip conveyor and coolant) Chuck: Kitagawa BB208 with through-hole Chip Management Mayfran hinged belt chip conveyor Coolant pump 8 bar & chip flushing Kedpfxowzkzzo Ag Aodw General Specification: - SD MEMORY I/F (1 port) + USB MEMORY I/F (1 port) - Mazak standard colour - NC-controlled tailstock - Tailstock pressure adjustment - Tailstock with fixed live center mount - Operator door with interlock switch - Double foot switch - Fully enclosed work area - Work area lighting - Safety features compliant with global standards - Complete coolant system - Chuck condition monitoring - Automatic Tool Eye - 10.4" color screen - EIA/ISO package - LAN interface - Standard tool set

Condition: excellent (used), Year of construction: 2018, operating hours: 1,730 h, functionality: fully functional, turning length: 760 mm, turning diameter over cross slide: 780 mm, turning diameter: 376 mm, spindle motor power: 22 W, spindle speed (min.): 20 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 82 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, mount diameter: 24 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, bar passage: 80 mm, collet bore: 80 mm, bar diameter (max.): 80 mm, CNC Turning and Milling Center Doosan Puma 2600 SYII with Fanuc i Series Control including Accessories The machine has had very little use, with approximately 1,730 spindle hours, so it is as good as new and available from 01.01.2026. Additional accessories for Doosan Puma 2600 SY II lathe: - 2 tool holders for external turning tools 25x25 - 1 double tool holder for external turning tools 25x25 - 1 tool holder for face machining 25x25 - 2 tool holders for internal turning tools (boring bars) diameter 50 mm - 1 double tool holder for internal turning tools diameter 32 mm - 1 tool holder for parting-off tools - 1 double right tool holder for external tools (sub spindle) - 1 double left tool holder for external tools (main spindle) - 4 driven tool holders ER-32 radial (X axis) - 5 driven tool holders ER-32 axial (Z axis) - 1 driven tool holder ER-32 radial (X axis) with internal coolant supply - 1 driven tool holder ER-32 axial (Z axis) with internal coolant supply - 1 three-jaw chuck for main spindle with 1 set of hardened jaws + 2 sets of soft jaws - 1 three-jaw chuck for sub spindle with 1 set of hardened jaws + 2 sets of soft jaws - 1 collet chuck for main spindle including collets for Ø50 mm and Ø30 mm Kjdpfx Agsxauwbo Asdw - 1 collet chuck for sub spindle including collets for Ø50 mm and Ø30 mm - 1 set of reduction sleeves for Ø50 mm (10 pieces) - 1 set of reduction sleeves for Ø32 mm (7 pieces) - 1 set of adapters for driven tool holders (ER 32 collet, Weldon, milling holder) - Flushing device with coolant on main spindle for automatic jaw cleaning - Device for automatic jaw cleaning with compressed air - Additional high-pressure pump for internal coolant supply (drilling with indexable drills) - Automatic machine shut-off function (machine also switches off the main power, thus disconnecting the power supply) - Interface for automatic bar feeder magazine Iemca