Stretch blow molder

Sidel EVOBLOW SBO 10 MATRIX L

Condition: used, Year of construction: 2022, functionality: fully functional, COMPLETE CANNING LINE 60,000 CPH KRONES 2022 Manufacturer: Krones Year of Manufacture: 2022 Product: Carbonated & non-carbonated beverages Capacity: 60,000 cph / 250 ml Working hours: 4,000 hours Possible cans: Standard, slim, and sleek Closure type: CDL Closure sizes: DIA200 and DIA202 CIP Line II: Varioclean Beverage treatment: Contiflow Depalletizer: Pressant Universal Empty can inspector: Cantronic 709 Can filler: Modulfill Can lid feeder: unit Inspection machine: Checkmat Foam cleaning Can seamer: Ferrum Pasteurizer: Linaflex Stretch wrapper: 1850T One-way packer: Variopac Pro 2 Container conveyors: Synco Container dryer: Linadry 2 Container dryer: Linadry 1 Inspection machine: Checkmat 731 Can rinser Palletizer: Pressant Palbloc Pack conveyors: Multico Pallet conveyor: Palco Pallet conveyor 2: Palco Code: NP 676 Ibjdswuq Hwspfx Adkod

Condition: like new (used), Year of construction: 2004, COMPLETE PET BOTTLING LINE | 13,000 BPH Speed: 13,000 BPH at 0.5L 12,000 BPH at 1.5L Working hours: approximately 2,500 per year Blower SIPA 2004 Model: SFR12 Number of cavities: 12 Preform tipper. Air recovery Compressor NOT PRESENT Chiller NOT PRESENT Piping NOT PRESENT Included formats: 0.5 L – 1.5 L – 2 L – 0.66 L Air conveyor LANFRANCHI 2002 Saturator ALCIAMPIANTI 2006 Ozone generator PROCOMAC 1997 Filling monoblock PROCOMAC 1997 Ibsdpfxjtqfg Ho Adked Rinser with 36 clamps Model: GRIPSTAR Isobaric filler, 48 valves Model: FILLSTAR PET 48.12 Functions: Sanitization De-gassing Capper AROL 12 heads – 2018 Model: TS EURO PK Cap types: Alaska Sport cap Hopper, elevator and unscrambler included Bottle inspector OMRON 2008 Level control Cap presence check Expulsion in case of defects Labeller P.E. 1997 Model: FUTURA 15T Number of heads: 15 Label type: wraparound Type of glue: glue Gluing system Nordson 2010 Conveyor belts PROCOMAC 1997 Shrink wrapper SMI 1997 Model: APET 143/D Type: film launch Packable formats: 3x2 4x3 6x4 Handler SMI 1997 Model: MAB 60 Number of lines: single Double reel magazine Palletizer TMG 1997 Model: SIRIO 2S1C Type: push system Interlayer system Pallet storage Pallet wrapper TOSA 1997 Model: 121 Type: rotating arm Functions: Pre-stretch Top sheet application Machinery has been serviced regularly, about once per year Last maintenance: April 2024

Condition: ready for operation (used), Year of construction: 2014, Number of decks: 1, total number of zones: 12, number of pairs of regenerative zones: 3, number of pasteurising zones: 5, number of separate cooling zones: 1, number of tunnel modules (without infeed and outfeed module): 12, pump side: right, belt load: 152.6 kg/m², max. belt load: 260kg/m², throughput capacity at 0.15l, 0.25l: 65,000 cans/h, with documentation, on-site inspection is possible. Isdpfx Aern Ta Ujdksbd

Condition: used, Krones 48,000-bottle-per-hour (BPH) complete bottling line for non-carbonated products is designed for PET containers with sizes of 0.38 L and 0.55 L, using volumetric filling and 30/25 type necks. The line includes several key components, including a 2015 Krones Contiform blow molding machine with 22 cavities, a 2015 Krones Contifeed preform conveyor, and a 2015 Krones Contiform 50-20 filling monoblock. The system also includes 2021 Hawkeye Smart C-3000 and 2020 Krones Linadry air dryers, 2021 Krones labeling machines, and several other machines for inspection, packaging, shrink wrapping, and palletizing. This used bottling line is ready to use and monitors the operational status of each machine monthly to ensure maximum efficiency and reliability. Krones Contiform 2015 blow molding machine with 22 cavities of Used Complete Bottling Line Krones for Still products 48000 bph The Krones Contiform 2015 blow molding machine with 22 cavities of this krones line is designed for high-speed production of PET containers, with an output capacity of up to 48,000 bottles per hour. The Contiform uses an optimized linear infrared heating module for preforms up to 160 mm in length and 48.5 mm in support ledge diameter. This model features advanced blow molding technology, enabling production of up to 2,750 containers per cavity per hour, while reducing compressed air consumption by 15% compared to previous models. The intelligent control system of the Contiform ensures consistent bottle quality through various optional modules, such as the Prejet preform internal cleaning system and the PET-View inspection system for integrated quality control of preforms and containers. The machine includes a blowing module with an advanced mold clamping mechanism, eliminating the need for a pressure pad and allowing the production of bottles up to 2.0 liters in volume on a reduced-size blowing module, occupying 22% less space than previous models. Iodpfxevlwpuj Adkebd The active transfer system with five-point heating mandrels in the linear oven and reduced number of internal horizontal transfer points for preforms and containers improve operational efficiency. The high-precision Monotec servo motors with real-time synchronization ensure precise and reliable handling of preforms throughout the blow molding process. Krones Contifeed 2015 preform conveyor The Krones Contifeed 2015 preform conveyor is designed to ensure continuous and consistent feeding of preforms to the blow molding machine. The Contifeed system supports various types of preforms, including lightweight, standard, and heavy, and is available in three models suited to the respective blow molder capacity. The feed rail variants include a gravity system for common preforms and an air-assisted system, ideal for lightweight preforms and high-speed applications. The Contifeed features automatic adjustment for quick format changes, hygienic design, and a soft-tilting preform tipper for gentle preform feeding.

Condition: used, Year of construction: 2016, operating hours: 25,046 h, Used Blow Molding Machine KRONES Contiform C312 PRO Year 2016 Introducing the Blow Molding Machine KRONES Contiform C312 The KRONES Contiform C312 PRO blow molding machine, manufactured in 2016, represents the pinnacle in the bottling industry. Crafted by the renowned German company Krones, this model delivers reliable, high-quality performance to meet the most demanding sector requirements. Performance and Capacity of the Machinery Ibjdpfsvgu Eiex Adksd Featuring a 12-cavity mold, the Blow Molding Machine KRONES Contiform C312 operates at a maximum speed of 27,000 bottles per hour (bph). This remarkable production speed ensures a steady, efficient flow, thereby optimizing processing times and maximizing productivity. Versatility and Adaptability of the Blow Molding Machine KRONES Contiform C312 Moreover, its ability to adapt to various product types, including square and round shapes, makes the Contiform C312 PRO highly versatile. This feature facilitates a wide range of applications in the bottling industry, offering operational flexibility and production diversification possibilities. Structural Solidity and Durability Weighing 25.0 tons, the machinery is built to withstand the continuous demands of the production environment. Its solid, reliable structure ensures long-lasting performance, consequently minimizing downtime and ensuring uninterrupted production. Efficiency in Material Handling Additionally, equipped with a tilter with a maximum capacity of 2.0 tons, the Blow Molding Machine KRONES Contiform C312 enables high efficiency in material movement and handling. This feature optimizes logistical processes within the company, thereby reducing loading and unloading times and enhancing overall operational efficiency. Advanced Technology and Optimal Performance Furthermore, the 150 kW blowing system ensures excellent material distribution, thereby guaranteeing the formation of perfectly shaped bottles free from defects. Additionally, the machinery is fitted with a 5 kW air conveyor and offers an air flow rate of 14㎥/h at 11°C and 1,100㎥/h, ensuring a constant, reliable flow during the production process. Concluding Remarks on the KRONES Contiform C312 PRO In conclusion, the Blow Molding Machine KRONES Contiform C312 stands out as the ideal choice for those seeking a high-quality used blow molding machine. With its robust construction, reliable performance, and advanced technology, this model offers an efficient and cost-effective solution for the most demanding bottling needs.

Condition: used, Year of construction: 1998, Overview This machine was built in 1998 by French manufacturer Sidel. The machine is in very good working condition, is already professionally dismantled and stored in a warehouse. Techn. Details Capacity: 7.200 bph in 1,5L Number of moulds:  6 (molds not included) Equipped with quick change for shell molds Number of heating modules: 10 modules Neck personalization: 29/25      Working hours: 47.000 only         Machine was regularily maintained       Machine equipped with:            Sidel preforms elevator to unscrambler Sidel preforms unscrambler & feeder Sidel oven & blowing wheel for 6 molds Sidel electrical cabinet Sidel PCC drive & control panel Big set of spare parts list upon request Iodpfxorkgy Ue Adksbd

Condition: used, Year of construction: 2013, Overview  The Linaflex tunnel pasteurizer was built in 2013 by the German manufacturer Krones. The machine has only a few operating hours, was still in use in 2023 and has been partially overhauled. The machine has already been dismantled, stored and is immediately available.   Technical data  Treatment area: 96 m²  Consumption  Maximum temperature of the drain water 80 °C  Steam - design flow rate 1,996 kW  Heat quantity 1st cooling medium 1,099 kW  Main water - design flow rate 47.6 m3/h  Air consumption 1 m3/h  Number of decks: 1  Total number of zones: 10  Number of pairs of regenerative zones: 3  Number of pasteurizing zones: 4  Number of tunnel modules (without inlet and outlet module): 10  Equipment  Main conveyor: Marathon Belt  Filter plug-in sieves  Material side doors: Stainless steel  Nozzle material: Plastic  Various extensions such as container sliding system, consumption measurement, dosing systems, machine insulation  Heating of the machine by means of plate heat exchanger incl. automatic temperature control  Dimensions  Width 5.230 m  Outer width incl. pumps and operating area 7.330 m  Total length without operating platforms 20.606 m  Ibedjvmyuiopfx Adkod

Condition: used, Year of construction: 2008, Used Combiblock Sidel SBO 20 Universal 36000 bph The Used Sidel SBO 20 Universal Combiblock 36000 bph is an integrated bottling system, combining a blower and a filler/capper in a single unit. This machine is designed for the production of PET bottles, with a production capacity of up to 36,000 bottles per hour. The Sidel SBO 20 Universal blower features 20 cavities, allowing efficient and continuous production. The system includes a preform feeder with a hopper and a preform unscrambler, ensuring a constant flow of material in the production process. The Europa WM 60 filler/capper is integrated into the Combi block, optimizing space and reducing transfer times between the blowing and filling stages. This compact design improves operational efficiency and minimizes the risk of contamination. The system has been used for bottling natural mineral water in 0.5-liter formats, with a 26.6 mm Alaska-type neck customization. The machine pitch is 113 mm, adapting to specific production needs. Currently, the machine is in storage, ready to be installed and put into operation in a new production facility. A complete inspection is recommended before start-up to ensure optimal performance. The required power supply is 400 V at 50 Hz, standard in many industrial plants. The immediate availability of the Combi system represents an opportunity for companies looking to quickly increase their production capacity.   Advantages of the Combi system over a traditional system The Combi system, like the Used Sidel SBO 20 Universal Combiblock 36000 bph, offers numerous advantages over traditional systems, which use separate machines for blowing, filling, and capping. Firstly, the compact design drastically reduces the space occupied in the plant, allowing companies to optimize available space and, in many cases, reduce infrastructure costs. Ibodsvgu D Sepfx Adkod Moreover, the Combi system eliminates the need for intermediate conveyors and accumulation zones between stages. This layout simplification reduces maintenance costs, lowers the risk of jams or breakdowns along the production flow, and improves the overall line efficiency. The absence of intermediate steps also reduces the possibility of contamination, a priority especially in the food and beverage sector. The integrated process between blowing, filling, and capping shortens production times as the operations proceed continuously and without interruptions. This contributes to increasing the overall line speed and hourly production capacity. Higher efficiency translates not only into increased productivity but also into a significant reduction in energy consumption and operating costs. Additionally, the Combi system requires fewer personnel for line management and supervision, as a single control unit allows all operations to be monitored from a centralized interface. This simplifies operational procedures and makes quality control easier throughout the process.

Condition: used, Year of construction: 1999, Overview This SIDEL blow moulder and KHS filling monobloc were both manufactured in 1999. They are still in production until the end of October and can be viewed in person. The special feature of the filler is that it can process carbonated or still mineral water with natural flavors using a micro-dosing unit. The filler (KHS Innofill monobloc) and accumulation table (Sidel AQ) are also available without the blow molder (Sidel SBO 18 Series 2), price on request.  Technical Details Blow moulder | SIDEL | SBO 18 Series 2 | 1999 Current capacity: 23.400 bph in 1.25L Working hours: 40.000            Number of moulds: 18      Moulds type: Shell type quick change Formats produced: 1.25L Bottles: Cylindrical petaloid base Oven type: Sidel Neck personalization: PCO 1881  Type of preforms: with recycled PET resin Machine was regularly maintained     Machine equipped with:            Sidel preform tipper Sidel hopper with cover & feeder Sidel preforms unscrambler Sidel preforms infeed rail Blowing station for 18 moulds Sidel electrical cabinet with Siemens Sidel PCC drive & control Lanfranchi bottles buffer storage silo            Unscrambler and air conveyor system with drive to the entry KHS monobloc Supplied with all format & spare parts available Rinser, Isobarometric Filler, Capper Monobloc | KHS, Zalkin | VK-E 40/50/10/S PET | 1999 (low working hours) Filling carbonated mineral water and also carbonated mineral water with natural flavours Processing: PET bottles 1,25L & 0.50L cylindrical petaloid base Bottle neck: PCO28 1881 Current capacity: 23.400 bph Number of rinsing nozzles (KHS Innoclean): 40 Number of filling valves (KHS Innofill): 50 Number of capping stations (Zalkin): 16 Including also micro-dosing unit Perrier for natural flavours With caps magazine & elevator Accumulation table Gebo Sidel type AQ file Dynamic accumulation and buffer between the filler outlet and the labeller inlet, avoids untimely stops upstream (filler, blow-moulder) due to the labeller Iederqar Sepfx Adksbd

Condition: like new (used), Year of construction: 2024, functionality: fully functional, BRAND NEW COMPLETE KRONES CAN FILLING LINE Capacity: up to 90,000 cans per hour. Manufacturer: Krones Year of manufacture: 2023/2024 Condition: Brand new, unused, never installed, still in original packaging Availability: Immediate Electrical Voltage: 440 V Frequency: 60 Hz Products: Beer, Carbonated Soft Drinks (CSD), Non-Carbonated Soft Drinks (Non-CSD) Filling temperature: 4ºC Compatible Can Formats: – 355ml – 204/202 – 355ml – 204 Sleek – 330ml – 211/202 – 473ml – 211/202 Secondary Packaging Options: – Tray with film – Film only – Pad with film Pack Formats Supported: – 6 x 4 – 3 x 2 – 3 x 4 Pallet Dimensions: – 1240 x 1100 mm – 1200 x 1100 mm – 1220 x 1020 mm – 1080 x 935 mm Line Composition: - PRESSANT UNIVERSAL 1A Container Sweep-off Depalletizer - CANTRONIC 709 D Empty Can Inspector - MODULFILL VODM-C 4.320-150-90 Can Filler - CHECKMAT 731 FM-X Inspection Unit - Foam Cleaning Module - LINAFLEX LC33.0-573-31 Product Treatment Unit - VARIOPAC PRO TFS-8 Shrink Packer - MODULPAL PRO 1AD Palletizer - LINADRY S2M Container Dryer x2 - CHECKMAT 731 FM-X Inspection Unit - SYNCO S Container Conveyor - MULTICO S Pack Conveyor - PALCO S Pallet Conveyor - Can Lid Feed Unit - OMEGA Stretch Wrapper - SYNCO Conveyor Lubrication System - Container Coding/Dating Unit - SYNCO Can Vacuum-Assisted Conveyor Coder - SYNCO Can/Liner Rinser – Linear Rinser - SYNCO Drip Pan Pipework System - SYNCO Can Vacuum Inspection System - Pack Inspection System - VJ 1620 UHS Pack Coding/Dating Device - Pallet Labeller - Uninterruptible Power Supply (UPS) Iodpsxc E Rwjfx Adkobd - Electrical Power Distributor - Infield Cable Ducts and Cable Trays - Internal Machinery Piping For further information or to arrange an inspection, please contact us.