Joinery machine

SCM M2

Condition: used, total length: 1,700 mm, total width: 1,300 mm, total height: 1,400 mm, Weight: 1.400 kg Price: On request - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AB44435 - Table length [mm]: 1640 - Table width [mm]: 630 - Conveyor width [mm]: 220 - Feed speed: Manual - └ Min. feed speed [m/min]: 6 - └ Max. feed speed [m/min]: 48 - └ Feed speed control: Continuously adjustable Ljdpfxeyvf D Sj Ahvshd - Voltage [V]: 400 - Transport dimensions: 1700mm x 1300mm x 1400mm (l x w x h) - Transport weight [kg]: 1400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Best price 4499 Eur (EXW Jonava, Lithuania) Dimension of sliding table- 2200x375mm Gross cut capacity- 1500mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 115mm Height of cut (45°)- 105mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 kW Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Lsdpfjdnxydex Ahvehd Weight: 700 kg * Using the blade 400mm, the smaller should be removed. Reduced saw blade should be used with not more than 350 mm main shield.

Condition: ready for operation (used), functionality: fully functional, type of input current: three-phase, cutting height (max.): 120 mm, saw blade diameter: 340 mm, total length: 1,670 mm, total width: 1,470 mm, total height: 1,400 mm, overall weight: 1,500 kg, extraction nozzle diameter: 180 mm, working height: 120 mm, SCM M2 multi-track saw Specifications: - condition - used - manufacturer - SCM - model - M2 - track width - 220 mm - max working height - 120 mm - power of main engine 25 HP ( 18 kW ) - discs diameter - 350 mm - spindle fi 40 mm, bushings fi 70 mm - speed control of the caterpillar in the range 6-48 m/min - caterpillar track in good condition, not worn out - working table 164 x 90 cm - suction nozzle fi 180 mm - weight - about 1500 kg - overall dimensions - 167 x 147 x 140 cm ( l. x w. x h. ) Lsdouqk Nzjpfx Ahvehd Additional information: - the machine is in good technical condition, ready for immediate use - the presented photos illustrate the actual state of the object of sale - possibility to turn on and check the machine on site. - the price given in the auction does not include VAT and transportation costs

Condition: excellent (used), CATALOGUE NUMBER 7879 Technical data: - Track width: 220mm - Shaft width: 200mm - Max blade diameter: 350mm - Blade bore diameter: 70mm - Max cutting height: 120mm - Table width with clearance: 900mm - Table length: 1640mm - From above: Ledpfx Ajyf A Iajhvehd - Row of pawls/kickback fingers - 1 pressure, sliding roller, metal - Pawls - Pressure, sliding roller, metal - Shaft with saws - 2 pressure, sliding rollers, metal - From below: - Guide - Pawls/kickback fingers - Track - Stepless feed speed adjustment - Feed motor 1.1kW - Main motor approx. 30kW - Central track lubrication - Insert for short elements - Extraction port diameter: 180mm - Overall dimensions (L/W/H): 1700x1500x1450mm - weight 1450kg ADVANTAGES – Italian-made – Insert for short elements – Used multi-blade saw – Very good condition Net price: 26,900 PLN Net price: 6,405 EUR (exchange rate 4.20 EUR) (Prices may vary with significant market fluctuations)

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 Standard Equipment: Lhsdpfx Ahew I Uxcevod - Electrically powered height and tilt adjustment (0–46°) with automatic correction of cutting height during tilting - Eye-level, swiveling control panel - Double roller carriage, carriage length 3,000 mm - Manually adjustable rip fence with scale, including manual fine adjustment, max cutting width 1,000 mm - Crosscut fence with fixed 90° position, manually adjustable via scale up to 3,200 mm - Max saw blade projection: 150 mm - Max saw blade diameter: 450 mm - Drive power: 4 kW (5.5 HP) at 4,000 rpm - AKE main saw blade clamping system - Working height: 91 cm Motor 5.5 kW (7.5 HP) with VARIO F45: - Stepless speed control from 2,000–6,000 rpm - Precise speed adjustment to the material increases cutting quality and blade service life Extended Cutting Height for Single-Side Tilting: - This option enables single-side tilting with a large extraction hood for max blade Ø 550 mm and a blade projection of up to 204 mm - In combination with a scoring unit: max blade Ø 500 mm / max cutting height 179 mm - Only available in conjunction with at least 5.5 kW (7.5 HP) drive power 2-axis Scoring Unit for Tilting: - With motorized height and lateral adjustment, programmable scoring blade height with quick lowering and raising - Drive motor 0.75 kW (1 HP), 8,200 rpm - Retrofitting only possible on machines prepared for the scoring unit LED Lighting: - Highly energy-efficient LED technology for clear marking of the scoring area The Altendorf double roller carriage is renowned for its smooth operation and precision run. It can be locked steplessly in any position. The large double rollers, precision-manufactured from hardened steel, ensure the upper carriage remains absolutely accurate in conjunction with the lower carriage on the hard-chromed guide bars. This running quality is maintained even after decades of heavy use and exposure to dirt. The carriage construction features a highly rigid, torsion-resistant multi-chamber design. The table surface is finely planed and anodized. A hard-chromed round bar in the upper carriage serves as both the mount for the cross-slide and the interface for various accessories. The entire unit is low-maintenance and does not require lubrication. On/Off Switch on Double Roller Carriage: - The on/off switch on the double roller carriage is always within easy reach. With four buttons, both the main saw blade and the scorer can be switched on and off, saving time and increasing safety. Angle/Mitre Fence, Crosscutting up to 3,500 mm: - This Altendorf-patented fence with integrated length compensation makes it easier to cut angles and mitres precisely in a single operation. In both positions, the swivel angle is steplessly adjustable by up to 49° and displayed on a scale. The play-free and robust stop flaps can easily be moved and adjusted as a single flap over the entire area up to max. 3,500 mm.

Condition: excellent (used), Catalogue number 7878 TECHNICAL DATA - track width: 220 mm - shaft width: 200 mm - max saw blade diameter: 350 mm - saw blade bore diameter: 70 mm - max cutting height: 120 mm - table width with clearance: 1100 mm - table length: 1640 mm - from above: - row of pawls/kickers - 1 metal pressure feed roller - pawls - metal pressure feed roller - shaft with saws - 2 metal pressure feed rollers - from below: - guide - pawls/kickers - track - stepless feed speed adjustment with inverter - feed motor: 1.1 kW - main motor: 29 kW - central lubrication of the track - extraction port diameter: 180 mm - overall dimensions (LxWxH): 2000x1600x1500 mm - weight: 1480 kg ADVANTAGES – Italian manufacture Ledpfjyf A Eljx Ahvjhd – used multi-blade saw – very good condition Net price: 27,900 PLN Net price: 6,643 EUR based on 4.20 EUR exchange rate (Prices may change depending on exchange rate fluctuations)

Condition: excellent (used), SCM M2 Multi-blade Saw Ledpsw Skpfsfx Ahvjhd Technical data: Track width: 220 mm Max cutting height: 120 mm Max blade diameter: 350 mm Stepless feed adjustment Automatic lubrication system Anti-kickback protection Fence Extraction port: 180 mm Emergency stop switch Power supply: 380 V Main motor power: 18.5 kW Overall dimensions: Length: 1700 mm Width: 1600 mm Height: 1250 mm

Condition: excellent (used), Weinig four-sided planer max planing width 230mm max planing height 120mm 5 heads, bottom-5,5KW; left and right-11KW, top-11KW, bottom-5,5KW feed - 4KW fully adjustable heads Lhjdpjrigxyjfx Ahvsd electrically adjustable up and down and planing width 40mm spindles feed on gimbal rollers, with smooth adjustment WEINIG brand solid planer, length of the machine 415cm machine checked in original condition

Condition: good (used), chain width 200mm Lhedpfx Ahow A H Aweved motor power 18,5kW max material heigth 120mm Refurbished track variable regulated feeder manual regulation of pressure rolls manual regulation of shaft max blade diameter 350mm

Condition: used, Year of construction: 2015, Numerical Control NC 1000 Software Biesse Works Working field in X axis 4300 mm Working field in Y axis 2205 mm FT nesting full plane worktable Automatic loading system with side lifting table Automatic labeling machine for barcode printing Automatic printing and application system of adhesive labels N ° 1 vertical electrospindle, with automatic tool change, HSK F63 Blade unit integrated in the drilling head on X axis - diam. 120 mm Blade unit integrated in the drilling head on Y axis - diam. 120 mm Automatic tool change system with 8 positions - positioned on the machine operating head Automatic tool change system with 21 positions - positioned on the rear of the machine with chain BH 20 boring head with independent spindles arranged as follows: - N ° 8 vertical in X axis - N ° 8 vertical in Y axis - N ° 4 horizontal in X axis - N ° 4 horizontal in Y axis Automatic unloading system with motorized belt Front protection and safety system with carpets and perimeter nets Automatic lubrication system Air conditioning system for the electrical panel Vacuum pumps Lhodjwt Snyspfx Ahvjd