Surface & thickness planer

SCM FS 7

Condition: ready for operation (used), Year of construction: 2019, operating hours: 336 h, functionality: fully functional, total length: 4,764 mm, edge thickness (max.): 8 mm, overall weight: 1,840 kg, controller model: Maestro Pro Edge, Edgebanding machine with only 336 operating hours & extensive accessories! TECHNICAL DETAILS Max. edge thickness: 8 mm MACHINE DETAILS Control system: Maestro Pro Edge Nedpfx Ajydc Abjh Hjwb Electrical Data Voltage: 400 Volt Frequency: 50 Hz Dimensions & Weight Machine length: 4,764 mm Weight approx.: 1,840 kg Operating hours: 336 h Edgebander configuration: • Flush trimming/scraper units, radii: 1 mm and 2 mm • Spray unit for final edge finishing • Spray unit for delicate edges • Flat scraper "RC-V" • Brushing unit "SP-V" • "SAVENERGY" kit • "EASY SIZE" adjustment unit • Interior lighting for the cabin and edge banding area • Ceramic infrared lamp • Electronic positioning of pressure rollers • Spare glue pot "SGP" with NC dosing • Additional glue pot "SGP" with NC dosing • Manual feed • "Nesting" tracing rollers • Diamond tools H=64 for pre-milling unit, 2 teeth • Base frame ADDITIONAL EQUIPMENT • SAC TS110 spindle moulder • Wagner EM40-15 lacquering device (year of manufacture 2018) • SCM FS 7 surface planer/thicknesser (year of manufacture 2022) • Aircraft A-K-MAX 15-10 VS screw compressor (year of manufacture 2022) • Schmalz vacuum lifter • Martin T24 spindle moulder with power feed and Aigner fence (year of manufacture 1977) • Concord AFKH surface planer • Kölle F50 spindle moulder incl. power feed • Kölle KFS 40 panel saw (year of manufacture 1980)

Condition: new, Year of construction: 2024, Working width: 520 mm Planing shaft: Tersa Number of knives: 4 Planer table length: 2300 mm Dressing fence angle adjustable: yes Folding up the dressing tables: pneumatic Maximum passage thickness of thickness planer: 250 mm Thicknessing table height adjustment: electric with position control Planer thickness display: digital Feed speed: 5/8/12/18 m/min Infeed roller: steel Pull-out roller: Rubber Pressure bar: jointed Table rollers: no Motor power: 7.5 kW Motor brake: yes, automatic Suction connection: 160mm Machine length: 2300 mm Nsdpfxevadxls Ah Hswb Machine width: 1100 mm weight: 980

Condition: new, Year of construction: 2025, CASADEI PFS 520 - Surface planer with 520 mm planing width and motorized thicknessing table adjustment Sturdy cast iron construction Large, ribbed planing tables made of grey cast iron, annealed against distortion Smooth running due to high dead weight Four feed speeds Motorized thicknessing table stroke with two speeds and digital display Link pressure shoes in the infeed 4-blade shaft, precision bearing mounted Nwedpfx Aebxz S Hoh Heb Sharp toothed steel feed roller for particularly even and gentle wood feed Extraction roller with rubber coating Large dressing fence, inclinable 90°- 45° readable from the front Standard with auxiliary fence Powerful S6 industrial motor (P2) Tersa planing cutter Change of planing knives in seconds When starting the machine, the planing knives are automatically clamped by the centrifugal force - self-locking The knife protrusion adjusts automatically without adjustment and screwing The planing table is adjusted by a stable and precisely guided parallelogram system, so that the distance of the table tips to the cutter head remains the same in every adjustment position. The sturdy aluminium dressing fence is anodised as standard, easily adjustable and offers a large contact surface. The adjustable inclination from 90° to 45° is easy to read from the workstation. Standard with auxiliary fence for safe planing even of narrow workpieces Fig. with optional equipment The connection position of the suction i

Condition: new, Work table adjustment in the infeed by means of parallelogram system Nwedpfxed Akyzj Ah Hob Display for chip removal via degree scale Simultaneous height adjustment and locking of the work tables complete with anti-tilt device Quick changeover system for changing from dressing to thicknessing operations (CE version) by means of a special support for the opening of the dressing tables and an automatic pneumatic positioning system of the suction hood, with hydraulic assistance. "READY" electronic control includes: - Thicknessing table adjustment - Manual, semi-automatic and automatic mode with 99 storable working programs. - Additional functions: Calculator and hour meter Automatic star delta start for main engine Machine table with height adjustment via 4 steel threaded spindles Rubber-coated feed roller at the outlet Exchangeable feed rollers Link pressure shoes in the infeed Planing shaft and setting gauge for planing knives Micro protection switch for correct positioning of the dressing tables and extraction hoods Dressing hood (CE version) Automatic motor brake on main motor Thermal protection switch Emergency stop switch Lockable main switch CE Declaration of Conformity Technical data [mm Usable working width [mm] 520 Total table length [mm] 2310 Blade shaft diameter [mm] 120 Motor power [kW] 9.0 Hz 50, 400 V Planer shaft speed [rpm] 5000 4 knives [mm] 35 x 3 x 520 Aluminium planing fence [mm] 1200 x 190 Planing fence inclination from 90° to -45 Min./ma

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: AB00033534, planing width: 520 mm, planer shaft diameter: 120 mm, total length of planing tables: 2,310 mm, surfacing fence height: 1,200 mm, number of planer blades: 4, input voltage: 400 V, input frequency: 50 Hz, rotational speed (max.): 5,000 rpm, Equipment: motor brake, Main Features: - Quick-change system for opening the tables - Speed, ergonomics, and safety - Worktable adjustment via parallelogram system - Lasting precision Technical Data: - Usable working width: 520 mm - Total table length: 2310 mm - Cutter block diameter: 120 mm Nwedpfx Ahewwv Ufo Hob - Planer spindle speed: 5000 rpm - 4 knives: 35 mm x 3 mm x 520 mm - Aluminium fence: 1200 mm x 190 mm - Fence tilting range: from 90° to -45° - Min./max. planing height: 3 / 250 mm - Feed speed thicknessing: 5-8-12-18 m/min - Extraction hood diameter, surfacer: 120 mm - Extraction hood diameter, thicknesser: 120 mm Standard Equipment and Accessories: - Infeed table adjustment via parallelogram system for chip removal by degree scale - Simultaneous height adjustment and locking of the worktables, complete with anti-tilt device - Quick-change system for converting from surfacing to thicknessing (CE version), with special support for opening the surfacing tables and automatic pneumatic positioning system for the extraction hood with hydraulic system - "READY" electronic control. Includes: * Thicknessing table adjustment * Manual, semi-automatic, and automatic mode with 99 storable work programs * Additional functions: calculator and hour counter - Machine table height adjustment via 4 steel threaded spindles - Independently motorized feed for thicknessing - Rubber-coated outfeed feed roller - Linked pressure shoes in the infeed - Planer spindle and knife holder with markings as positioning aid, including setting gauge for planer knives - Automatic star-delta start for main motor - Motor power: 9 kW 50 Hz (11 kW 60 Hz) (S6 -40%) [S1] 7.5 kW 10 hp 50 Hz (9 kW 12 hp 60 Hz) [S6 -40%] 9 kW 12 hp 50 Hz (11 kW 15 hp 60 Hz) - Operating tools Safety/Protection: - Micro safety switches for proper positioning of the surfacing tables and extraction hoods - Surfacing guard (CE version) - Automatic motor brake on main motor - Thermal protection switch - 110V auxiliary circuit - Emergency stop switch - Lockable main switch - CE Declaration of Conformity (CE version) Consisting of: R0.20.20 Linvincibile FS 7 CE version 93.07.31 Voltage 400 EU 93.12.01 Frequency 50 Hz 34.02.15 "TERSA" cutter block with disposable reversible knives, complete with one set of knives 24.06.15 Tilting auxiliary fence for thin workpieces 08.32.28 Base

Condition: new, Holzkraft minimax si 400es 32 sliding table saw 5504754 In heavy-duty professional design with scoring unit and format sliding carriage made of anodized aluminum. Scoring unit equipped with its own drive and easily adjustable from the outside Smooth-running and precise format sliding carriage made of anodized aluminum with proven and permanently smooth-running ball contact system on hardened, 10-year warranty on wear of the guide tracks Large table extension (longitudinally adjustable) with material roller on telescopic arm Extendable telescopic cross-cut fence with two folding stops Precise rip fence, foldable for large panels, with quick clamping and integrated fine adjustment Table widening, table extension and eccentric clamp as standard equipment Sawing unit made of a robust cast iron ring with permanently precise dual pivoting segment guide and zero-point pivoting for a smooth and perfect cut, 6-year Holzkraft warranty on wear of the pivoting segments Large-surface work table made of stress-free gray cast iron High dead weight ensures precision and smooth running Equipped with powerful three-phase motor Version M: Height adjustment and tilting of the saw unit electrically, digital display for tilting Version A: On/off switch on the sliding carriage Version M A 3: Programmed control of the saw blade height and tilt and the position of the rip fence, stepless positioning of the rip fence via switch or automatic positioning system, position display via encoder, adjustment via ball screw, incremental adjustment option UP version: swivelling control panel at eye level Made in Italy TECHNICAL DATA: Dimensions and weights Weight (net) approx. 715kg Suction connection Suction port diameter 120mm Nwjdpokkrm Rsfx Ah Hsb Suction port diameter saw blade guard 80mm Installation information Transport width990mm Machine body length 1900mm Machine body width/depth 885mm Required space length 7180mm Space requirement width/depth 4860mm Explanation of space requirements The dimensions take into account maximum travel distances or effective lengths Working area length 1600mm Working area width/depth 2300mm Explanation of working area Please add the dimensions given to the space requirement to obtain the free installation area recommended for the machine. Electrical data Supply voltage 400V Mains frequency 50Hz Power scoring motor 0,55kW Power drive motor 7,0kW Rated operating mode drive motor S6 Duty cycle drive motor 40% Sliding carriage and table Length of sliding table 3200mm Format sliding carriage width 360mm Format sliding carriage height 142mm Table length 940mm Table width 560mm table height 900mm Circular saw unit Cutting width with rip fence 1270mm Max. Trimming width left of saw blade 3260mm Trimming length 3200mm Saw blade inclination 90 - 45 Max. Cutting height 90°136,5mm Max. cutting height Cutting height 45°97mm Explanation max. cutting height Independent of scoring saw blade diameter 400mm Explanation Diameter of saw blade Independent of scoring unit Speed of saw blade 4000min¯¹ Scoring unit Diameter of scoring saw blade 120mm Speed of scoring saw blade 9200min¯¹ Holzkraft dealer - accessories available on request!

Year of construction: 2021, condition: new, Technical data: usable working width 520 mm total table length 2310 mm cutter block diameter 120 mm cutterblock speed 5000 rpm 4 knives 35x3x520 mm aluminum dressing fence 1200x190 mm planing fence inclination from 90° to 45 min./max. planing height 3 / 250 mm feed speed thickness 5-8-12-18 m/min. Suction stroke diameter dressing 120 mm Suction hood diameter thickness 120 mm Standard equipment: - Work table adjustment in the infeed by means of parallelogram system, indication for chip removal by degree scale. - simultaneous height adjustment and locking of work tables complete with anti-tilt device - quick changeover system to switch from dressing to thicknessing operations (CE version) by means of a special support for opening the dressing tables and an automatic pneumatic positioning system of the suction hood, with hydraulic support - "READY" electronic control includes: - Adjustment of the thicknessing table - Manual, semi-automatic and automatic mode with 99 storable working programs - Additional functions: Calculator and hour meter - machine table with height adjustment by 4 steel threaded spindles Nsdpfsn Sm Tijx Ah Hswb - rubber-coated feed roller at the outlet - exchangeable feed rollers - link pressure shoes in the infeed - planing shaft and setting gauge for planing knives incl. the following special accessories: "TERSA" cutterblock with one-way reversible knives, swivelling auxiliary fence

Condition: ready for operation (used), -Cutting area approx. 300 x 120 mm -saw blade 350 mm -traverse path 370 mm -turning knob D= 1200 mm Nodpfx Ahobubukj Howb The round table with the saw unit can be turned very easily on both sides Locks for locking are currently mounted on one side. The same can of course also be mounted on the other side Weight 890 kg

Condition: new, Basic equipment and accessories10-year guarantee on the guide system of the saw carriage- Saw carriage with anodized aluminum profile guide made of hardened,ground and flanged steel guides- Saw carriage length 3200mm- "READY" electronic control, 2-axis control (3rd axis onrequest) with:- Height adjustment and inclination of the saw unit (control of therip fence on request)- Management of the tool data with automatic correction of theCutting height in relation to the angle of inclination of the saw blade- Manual, semi-automatic and automatic mode with 99storable work programs- Additional functions: calculator and hour meter- Trimming frame for quick positioning of the stopmiter cuts- Table extensions in the outlet- Cutting length at the rip fence 1270 mm- 2-axis control with 99 programsMotor 7kW 50Hz (8kW 60Hz)- Motor with direct connection with push buttons- Three main saw blade speeds- Scoring unit with independent motorization, externally adjustable andStops for easy saw blade positioningSecurity/Protection- Emergency stop button on the front- Emergency stop button on the side near the rip fence (Version CE)- Thermal protection switch- Saw blade swing protection (version CE) integrated suction, suction nozzlewith a diameter of 80 mm- Saw blade swing protection with integrated suction, suction nozzle with 80 mmdiameter- Automatic motor brake on the main saw blade (CE version)- Lockable main switch- 110 V auxiliary circuit- CE Declaration of Conformity (CE version)Technical specificationsMax cutting height at 90° (mm) 140 with blade 400Max cutting height at 45° (mm) 97 with blade 400Saw blade tilt (degrees) 45Programmed lifting and swiveling of the saw blade unitSaw blade speed (rpm) 3000- 4000- 5000Scorer speed (rpm) 8500Main engine power (S6 -40%) kW (hp) 50 Hz 7 (9.5)Scoring unit power (S6 -40%) kW (HP) 50 Hz 1.3 (1.7)Format cuts:- with trolley 1600 (mm) n.a.- with trolley 3200 (mm) 3200x3200Cutting width for parallel cuts (mm) 1270Suction nozzle diameter:- on frame (mm) 120- on the saw blade guard (mm) 80- on the riving knife (mm) n.a.Net weight base machine (kg) 1050109999 Execution according to safety regulationsR10078 nova si 400ep CE version930731 volts 400 EU931201 Frequency 50 Hz570343 Digital readout for rip fenceComplete with:- Digital display and magnetic tape570133 Motor 9kW 50Hz (11kW 60Hz) with automatic star/delta switch kW9 HP12 Hz50 (kW11 HP15 Hz60)083202 base109993 MACHINE LANGUAGE: German Nsdpfx Ahevxr Ske Hewb