Surface Planer

Scm F 520 Nova

Condition: as good as new (ex-display), functionality: fully functional, TECHNICAL DATA: Technical characteristics NOVA F 520 Working width [mm] 520 Total length of tables [mm] 2750 Input table length [mm] 1550 Output table length [mm] 1200 Knife shaft diameter [mm] 120 Shaft speed rpm 5000 Knife dimensions (4 pcs) [mm] 35 x 3 x 520 Aluminum planer guide [mm] 1200 x 190 Planer guide inclination ° 90 - 45 Working table height from the floor [mm] 845 Exhaust connection diameter [mm] 120 Max. Removal [mm] 8 Engine power kW (HP) 5 (7) ----- Additional built-in options: * Spiral head "XYLENT" Isdeqw Uyfspfx Aa Ejaw

Condition: used, Year of construction: 2010, Sliding carriage: 3000 mm CNC parallel guide, cutting width 1000 mm. Motor: 5.5 kW electric motor for height and swivel adjustment. Swivel range: 0.5 - 47°. Digital display for swivel angle and cutting height. Saw blade diameter: max. 550 mm. Cutting height: max. 200 mm. Prepared for a scoring saw. Control panel at eye level, swiveling. Front table, swiveling. Table extension 840 mm. Angle/miter fence 3200 mm. Location: Supplier. Ijdpfszccg Djx Aa Eoaw

Condition: new, exhibition machine Technical specifications: Working width of machine table [mm] 520 Total length of machine table [mm] 2750 Front table length [mm] 1550 Rear table length [mm] 1200 Shaft diameter [mm] 120 Planer shaft speed [rpm] 5000 4 knives [mm] 35x3x520 Aluminum planing fence [mm] 1200x190 Swivel range of the planing fence from 90° to -45° Table height from floor [mm] 845 Diameter suction hood [mm] 120 Maximum chip thickness [mm] 8 Controls/Functions - Manual adjustment of the front table - Display of chip thickness on scale Ijdpfxsvwf Amo Aa Eeaw Security/Protection - Planer shaft protection with parallelogram adjustment below the  Working line (CE version) - "Boomerang" cutterblock protection (versions with electric  protective devices) - Insertion work not possible (CE version) - Lockable main switch - Thermal protection switch - 110V auxiliary circuit - Automatic engine brake (CE version) - Emergency stop button - CE declaration of conformity (CE version)   fixtures - Complete planer shaft and knife holder with markings as a positioning aid  with setting gauge for planer knives - Service key set - Motor with direct connection :  (S1): 4kW 5.5hp 50Hz (4.8kW 6.6hp 60Hz)  (S6 -40%): 5kW 7hp 50Hz (6kW 8hp 60Hz) 109999 Execution according to safety regulations No. 1 R11163 nova f 520 version CE 930731 volts 400 EU 931201 Frequency 50 Hz 555014 P1 version - CE and electrical protections Motor power 7kW 50 Hz with automatic star-delta switch   570127 Additional folding stop for processing thin parts 570135 TERSA cutterblock with insert knives Complete with a set of knives 083250 base 109993 MACHINE LANGUAGE: German

Condition: excellent (used), Year of construction: 2017, Brandt KDF 1440 Edition Iaodpfszb Iggex Aa Esw Only 1700 operating hours – in very good condition – can also be supplied with a preheating station. XES 200 autonomous unit (+ €4500) available. SUMMARY OF MACHINE EQUIPMENT: JOINTER HEAD 2 X 2.2 KW 200 HZ GLUING UNIT QA 65 N SAWING UNIT BEVEL/STRAIGHT 2 X 0.18 KW PNEUMATIC ADJUSTMENT FOR SAWING BEVEL/STRAIGHT MULTI-STAGE MILLING HEAD MS 40 COUNTER-ROTATING PNEUMATIC 2-POINT ADJUSTMENT SHAPED MILLING HEAD 1 X 0.35 KW WD 60; also for structural flooring PNEUMATIC 2-POINT ADJUSTMENT RADIUS/BEVEL MULTI-STAGE SCRAPER HEAD MZ 40 GLUE JOINT SCRAPER EDGE TRIMMING UNIT Overpressure: PU rollers instead of standard rollers Additional application unit QA 65 N (interchangeable) Release agent spray unit for workpiece Automatic edge infeed Multi-roller scanning for multi-stage milling head MS 40 + multi-stage scraper MZ 40 Cleaning agent spray unit WORKPIECE AND EDGE PARAMETERS: – Workpiece width min: – For workpiece thickness 8-22 mm ¦ 70 mm* – For workpiece thickness 23-40 mm ¦ 120 mm* – For workpiece thickness 41-60 mm ¦ 150 mm* *Depending on workpiece length – Workpiece overhang ¦ 38 mm – Workpiece thickness ¦ 8 – 60 mm – Edge height max. = workpiece height ¦ + 6 mm – Edge material, roll ¦ 0.4 – 3 mm – Edge cross-section max. – For PVC ¦ 135 mm² – For veneer ¦ 100 mm² – Roller diameter max. ¦ 830 mm – Edge material, strip ¦ 0.4 – 8 mm – Edge cross-section max. – For strips ¦ 360 mm² – Feed rate ¦ 8 – 14 m/min – Max. feed rate with shaped milling head ¦ 11 m/min – Working height ¦ 950 mm – Pneumatic connection ¦ min. 6 bar – Overall length ¦ 5,573 mm Complete description: see PDF

Condition: new, Year of construction: 2026, Hebrock - Altendorf Edge Bander F5 next - Brand new machine, still in original packaging with complete equipment - With PLC control including 15" touchscreen - Edge material up to 3 mm - Whispercut jointing head including DIA tool up to 2 mm - Coated maintenance-free glue pot, PUR interchangeable tank - Includes glue drain device downwards - HF milling station with pneumatic milling adjustment Iaodpoy Iw Nrefx Aa Ejw - Corner rounding unit - Radius scraper - Surface scraper including pneumatic lift device - Buffing station - Combination milling head - Radius milling head R = 2 mm - Radius corner milling unit R = 2 mm - Quick-change system for corner milling unit - Additional changeover motor for corner milling unit with tooling - Radius changeover motor R = 1 mm - Ball bearings 24.1 and 24.2 mm - Multi-radius scraper R1/R2 - Underframe - Additional interchangeable glue pot including stand - Spray system for release agent PUR - Spray system for cleaning agent PUR - Spray system for edge PUR/foil - Nesting for milling head and radius scraper - Pneumatic 3-point adjustment (radius, chamfer, flush trimming) - Jointing up to 50 mm workpiece thickness - LED lighting inside - Workpiece thickness 8–50 mm - Min. workpiece length approx. 160 mm - Feed speed approx. 10 m/min - Dimensions (LxWxH): 4.40 x 1.10 x 1.55 m - Weight: gross: 990 kg; net: 930 kg - Extraction nozzle 1 x 140 mm Delivery and commissioning possible.

Condition: excellent (used), functionality: fully functional, number of spindles: 35 pneumatic head inclination Isdpfxsw U Aiij Aa Esaw

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, For sale is a used BRANDT KDF 440 C edge banding machine from the HOMAG Group. Year of manufacture: 2017 Iajdpozc D D Dofx Aa Ejw Edge trimming unit Gluing unit Pressure zone Cutting unit (2-motor) Multi-stage trimming unit Profiling and corner copying unit (1-motor) Profile and flush trimming blade Jointing unit Feed rate: 14 m/min EVA & PUR compatible PowerTouch control system PU pressure rollers Few operating hours Available from June 2026 In very good condition.

Condition: used, Year of construction: 2006, Motor-adjustable parallel fence Lengthwise stop with display Iaodpfx Aajzawius Eow One-sided motorized pivoting Sliding carriage 3000 mm 5.5 kW Scoring saw Location: Nattheim

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Condition: Currently still in production Iedpfoynpc Njx Aa Eeaw Equipment and technical data: Glue pot Pressure zone Cut-off saw Combination milling (radius 2 mm), flush trimming Workpiece thickness: 8 - 50 mm Minimum workpiece width: approx. 75 mm Minimum workpiece length: approx. 120 mm Edge thickness: 0.4 - 3.0/5.0 mm Maximum edge height = workpiece height + 4 mm (2+2) Electrical connection: 400V, 50 Hz, 3-phase Total connected load: 3.2 kW Feed speed: 8.0 m/min Pneumatic connection: 6 bar Net weight: 550 kg Optional retrofits for the machine: Radius scraper Flat scraper Buffing unit Location: NRW Availability: Approx. December 2025

Condition: used, Year of construction: 2018, functionality: fully functional, Biesse Akron 1400 Edgebander. Genuine UK Machine available for demonstration: £10,000 + VAT Isdpfxexrwm Ne Aa Eeaw This machine is suited for flush or bevel trimming of edgebanding materials upto 8mm thick (Max 3mm on the coil). Currently the machine is fitted with Straight cutters, but combination cutters can be fitted for radius trimming. This machine DOES NOT do corner rounding. But does have the following units: - Pre-Milling. EVA Hot Melt Gluing System. End Snipping Saws (Straight or Chamfer cut). Rough Trim (Top & Bottom). Fine Trim (Top & Bottom). Glue line scraping (Top & Bottom).