Machining center

SCM Routech Balestrini Twister

Condition: good (used), Year of construction: 1995, functionality: fully functional, Used dipping plant, manufacturer Wichmann, type WH 6.0 Fpsdpex Akq Njfx Aalsg - 6.0 m long x 1.75 m wide x 1.75 m high, clear internal dimensions; - Year of manufacture: 1995; - Control via SPS Moeller PS4 with program selection; - Wooden support approx. 5 m long, hold-down device approx. 5 m long with frame; - Double-walled with leakage sensor; - Internally partially rusted; - Transport dimensions: approx. 7.50 m long, 2.44 m wide, 2.98 m high (with guide rails removed); - Weight approx. 10.0 tons; - Plant empty, loaded onto truck free of charge.

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Fpjdpfoxy Tmnox Aalsg

Condition: refurbished (used), DIFFERENT TYPE OF MOTOR AND SLIDE for CELASCHI DET SECOND-HAND, FULLY RECONDITIONED Fpsdedvlcyspfx Aalsg

Condition: like new (used), Year of construction: 2004, WEINIG UNIMAT SUPER 4 planer – German production - very good condition – year of production 2004 – DTR TECHNICAL PARAMETERS: planing width 150 mm planing height 50 mm spindle diameter 40 mm equipped with tools upper adjustable head 1) lower head 11 kW 6000 rpm 2) upper head 18.5 kW 7000 rpm 3) lower head 5.5 kW 6000 rpm feed motor 2.2 kW feed adjustable on the inverter 0-18 m/min feed on cardan shafts pneumatic clamp three upper steel-plated pulling rollers one rubber top roller grooved top pre-top length 1950 mm total power 37 kW central lubrication Transport dimensions: length/width/height 320x220x220 cm weight ~ 2700 kg Fpjdpfx Aasin Nrgeleg

Condition: used, Year of construction: 2018, Price: On request CNC machining centre SCM ACCORD 25 FX Brand SCM Type ACCORD 25 FX  Year of construction 2018 Machine no. AA10000992 Machining table dimensions 5020x1380 mm (LxW) Worktable equipped with 2 vacuum fields Worktable equipped with 2 reference lugs Including 8 reference lugs and 8 supports  Speed XY, vector 35 m/min Movement axes Maximal speed X axis 25 m/min (pro space) Maximum speed X axis 90 m/min (pro speed) Maximum speed Y axis 90 m/min Maximum speed Z-axis 30 m/min Control unit Machine control KVARA control Windows Embedded Standard 7-64bit Hard disk storage capacity 500GB-7200rpm Microprocessor Intel Pentium-2.9GHz RAM memory 8GB-DDR4 XILOG-MAESTRO software package Including vacuum pump  Motor power 5.5 kW Pump capacity 250m3/hour Vacuum pressure maximum 0.9 bar Total dimensions 9000x4500x3000 (LxWxH) Total weight 7,500 KG.  - Year: 2018 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AA10000992 - Number of milling spindles [pcs.]: 2 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 3 - - Min. spindle speed [rpm]: 6000 - - Max. spindle speed [rpm]: 18000 - - Main motor power [kW]: 15 - └ Milling spindle 2: - - Number of controlled axes [pcs.]: 3 - - Min. spindle speed [rpm]: 600 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 12 - Type milling table: Beam table - Tool clamping system: HSK-F63 - Tool changer positions [pcs.]: 12 - System/software: SCM Maestro - Safety feature: Bumper guard - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 250 - CNC options: Offcut conveyor - Table length [mm]: 5020 - Table width [mm]: 1380 - Working range Y [mm]: 1300 Financial information Fpjdpeycwupefx Aaleg VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), Year of construction: 2018, Weinig Powermat 700 Year of manufacture: 2018 Planing width: 230 mm Planing height: 160 mm Infeed table: 2,500 mm Feed speed: 40 m/min Feed motor: 7 kW Table treatment: Marathon coating (hardened, excluding infeed table and special plates) Fedpsyg Hfljfx Aalepg Driven roller in table with width 200 mm Memory Plus system for 500 profiles Spindle arrangement Bottom: 11 kW Right: 7.5 kW Left: 7.5 kW Top: 11 kW Top: 11 kW Bottom: 11 kW Machine is in very good condition

Condition: used, Year of construction: 2014, What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. Fpjdpfx Aaox Hwhxsleg If you have any questions, feel free to contact us! - Machine available from: 2026-03-30 - Year: 2014 - Documentation available: Yes - CE certificate present: Yes - Serial number: AA1/017825 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - Type milling table: Beam table - Tool clamping system: HSK-F63 - Drilling unit present: Yes - Tool changer positions [pcs.]: 12 - System/software: SCM Maestro - Safety feature: Safety light curtain, Enclosed fence - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: VTLF 2.250/0-791 - └ Year of manufacture: 2014 - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 244 - └ Vacuum pressure [bar]: 200 - CNC options: Manual control - CNC documentation available: USB stick - Working range X [mm]: 5200 - Working range Y [mm]: 1550 - Z-axis working range [mm]: 160 - Installed length [mm]: 9000 - Installed width [mm]: 5000 - Installed height [mm]: 3100 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2018, operating hours: 10,347 h, total height: 2,400 mm, total length: 7,000 mm, total width: 2,400 mm, Colour: Grey Empty weight: 3.450 kg - Year: 2018 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Operating hours: 10347 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - Type milling table: Beam table - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 10 - └ Vertical drilling spindles [pcs.]: 24 - Saw unit present: Yes - Tool changer positions [pcs.]: 25 - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - Working range X [mm]: 3110 - Working range Y [mm]: 1320 - Z-axis working range [mm]: 180 - Transport dimensions: 7000mm x 2400mm x 2400mm (l x w x h) - Transport weight [kg]: 3450kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Fpodoxtbgpepfx Aaleg Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: good (used), Year of construction: 2006, Item description: WEINIG Conturex - machining center Product features: The WEINIG Conturex machining center is an innovative and powerful tool for the precise machining of wood and wood materials. It enables comprehensive profile machining in a synchronized through-feed process and is optimized for a wide variety of manufacturing processes. The combination of the latest control technology and robust construction makes the WEINIG Conturex the ideal solution for demanding production environments. Technical data: • Intended use: High-precision profile machining of wood and wood materials. • Machining types: Sawing, milling, drilling, grinding in transverse and longitudinal directions. • Raw part dimensions: • Length: 180 - 1500 mm • Width: 25 - 260 mm • Height: 10 - 100 mm • Performance data: • Compressed air: 6 bar (minimum requirements) • Hydraulic pressure: 90 bar • Extraction capacity: Optimized dust and chip extraction for clean work. Equipment and functions: Fpsdjvq Sylopfx Aalog • Control: • NC-controlled system with integrated CAD/CAM for quick adaptation of machining programs. • Intuitive touchscreen interface for easy operation. • Work areas: • Two fully equipped machining stations for parallel work processes. • Fast tool changes thanks to automatic tool magazines. • Safety features: • Access locks and safety switches at all relevant points. • Automatic shutdown in the event of malfunctions. • Material guidance: • Precise clamping systems ensure exact positioning and secure hold of the workpieces. Advantages for the user: 1. Maximum efficiency: • Shortened production times through parallel processing and optimized throughput times. • Automated tool change minimizes downtime. 2. Flexibility: • Suitable for individual and series production with quick adaptation to different workpiece dimensions. • Customizable software options for customer-specific requirements. 3. Precision: • High-quality workmanship guarantees consistent quality in every application. • Accuracy to within fractions of a millimeter. 4. Durability: • Robust construction and durable materials ensure a long service life. Application possibilities: The WEINIG Conturex is ideal for applications such as: • Window and door production • Production of profile strips and frames • Furniture part production • General woodworking with high precision requirements Operating and maintenance instructions: • Operating conditions: • Only use in dry, clean indoor areas. • Ensure regular maintenance in accordance with the manufacturer's instructions. • Maintenance: • Automatic central lubrication for minimal manual maintenance effort. • Easily accessible maintenance points for quick and easy inspections. This machine combines cutting-edge technology and ease of use and is specially designed for companies looking for precision and efficiency in woodworking. With the WEINIG Conturex you get a machining center that is designed for the highest quality and maximum productivity. We will be happy to provide you with further technical details and customization options on request.

Condition: used, Year of construction: 2022, - Minimum diameter: 5 mm. Fodpfx Aeyvtquoaljpg - Maximum diameter: 65 mm. - Minimum length: 350 mm. - Maximum length: unlimited - Productivity: 2/17 t/min - Tool rotation motor: 5.5 kW. - Power supply: 0.75 kW. - Motor tension: 400 V/50 Hz. Automatic coin loader Machine like new