Spare parts for CELASCHI DET

CELASCHI TSA

Condition: excellent (used), 4-SIDED SIZING-SHAPING LINE (currently for Internal Doors). Composed by of the following machines: Csdswzmbqepfx Albjhb X10023A) Motorized infeed rollers table "CELASCHI"" X10023B) Double End Tenoner "CELASCHI" Mod. TSA 3 B 480 A Installed power KW 65 X10023C) 90° Motorized Transfer ("L-shape") conveyor "CELASCHI" Mod. X10023D) Double End Tenoner "CELASCHI"" Mod. TSA 2 B 360 Installed power KW 60

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms Csdpefi Tg Hefx Albohb No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which receives panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 30

Condition: excellent (used), Independent machine (standing alone) and/or Universal machine (First & Second in a line) It is 2nd DET in the X10023 LINE Electronic Programmer OMRON Safety and sound-proof enclosure Electric and command cabinet Chjdpfx Aleyz Si Hjbjb No. 3+3 Vertical columns to support the working units As a second machine, it accepts panels 1900 mm deep Min. useful working width (mm) 300 Max. useful working width (mm) 2500 Min. useful working thickness (mm) 6 (ca.) Max. useful working thickness (mm) 60 Distance between center-axes of the disappearing dogs (mm) 400 Adjustable (min/max) feeding speed (m/min) 4-24 Total installed power Kw 65 No. 3 Working groups (for each machine's side): - 1 Jumping vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) - 1 Standard vertical NC Milling Unit (useful height 500 mm ca.), belt drive motor (9.2 kW at 3000 rpm) - 1 Jumping vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) NOTE: These 3 main vertical Milling units are NC controlled, with horizontal and vertical adjustment - 1 Free space

Condition: excellent (used), Independent machine (standing alone) and/or Universal machine (First & Second in a line) It is the 1st Double End Tenenor in the X10023 LINE Electronic Programmer OMRON Safety and sound-proof enclosure Electric and command cabinet No. 2+2 Vertical columns to support the working units Min. useful working width (mm) 300 Max. useful working width (mm) 2000 Min. useful working thickness (mm) 6 Max. useful working thickness (mm) 60 Chedpeyz Siaefx Albsb Distance between center-axes of the disappearing dogs (mm) 400 Adjustable (min/max) feeding speed (m/min) 4-24 Total installed power Kw 60 No. 4 Working groups (for each machine's side): - 1 Jumping vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) - 1 Standard vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) - 1 Jumping vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) NOTE: These 3 main vertical Milling units are NC controlled, with horizontal and vertical adjustment - 1 Vertical Milling Unit (1.5 kW at 1470 rpm)

Condition: as good as new (ex-display), Year of construction: 2025, CASADEI F 25 LL FK - Table milling machine with swiveling milling spindle and table extensions Table milling machine with a swiveling milling spindle from -45° to +45° Stable steel cast iron construction Dynamically balanced milling head anchored to the work table Particularly robust design Smooth operation thanks to precision components and high weight Standard with right/left rotation and electronic locking during direction change 5 speeds from 3000 - 10000 min-1 Speed change is simple and convenient from the machine side Standard with MK 4 quick-change spindle system Csdpfx Aedqzcxjlbjhb Large work table made of cast iron for lasting precision Easy operation thanks to control elements and speed display on the front of the machine Milling fence with fine adjustment and aluminum fence cheeks included as standard Powerful industrial motors Equipment details: Milling fence Milling fence with crank/handwheel adjustment from the front With numerical display Quick-change spindle Quick-change spindle MK 4 standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenon cutting operations and for slotting Scope of delivery: Manually swiveling milling spindle from +45° to -45° Speed display via LED on the front Aluminum fence cheeks Arc milling guard Right/left rotation of the milling spindle MK 4 quick-change milling spindle Milling fence with crank/handwheel adjustment from the front with numerical display Table extension left and right (2500 mm length) Extendable workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article no.: 5220728 Technical data Dimensions of work table: 2500 x 810 mm Swiveling range of milling spindle: +45 to -45 degrees Usable length of spindle with Ø 30-35 mm: 140 mm Usable length of spindle with Ø 40-50 mm: 180 mm Milling spindle stroke: 90 mm Max. tool Ø for profiling: 250 mm Max. tenon tool Ø: 350 mm Max. form cutter tool Ø: 160 mm Max. tool Ø, plunge-cutting: 320 x 60 mm Speeds, 5-stage: 3000/4500/6000/8000/10000 min-1 Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction nozzle Ø on the fence: 1 x 120 mm Extraction nozzle Ø under the table: 2 x 80 mm Location: In stock at 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: TSA5215 – TSA5218 – TSA5220, We are an Italian Company and we have this machinery installed into our factory in Tunisia. The line is currently configured for the production of floating flooring strips with Uniclic profile and is equipped with a complete set of diamond tools. The line is still installed and can be inspected under power. Production tests are available upon request. Line includes • Panel cutting machine • Motorized roller conveyor • Double machine for long-side profiling • Automatic transfer system • Double machine for end profiling • Automatic stacking system • Complete handling conveyors Technical Features Codpfx Aszkv Ezjlbehb • 10 spindles • Opening machine 1: 180–1200 mm • Opening machine 2: 200–1800 mm • Installed power: 92 kW • 380 V electrical supply Advantages • Complete production line • Immediately available • Installed and fully operational • Inspection and production test possible • Ideal for flooring, panels and similar products

Condition: refurbished (used), Year of construction: 2023, Lengthwise and crosswise parquet line completely renovate with fully guarantee. Chedpelaxinsfx Albeb Width min/max 80-400 mm Length min/max 500-3000 mm 4+4 motors per side Customized machine according to customer needs

Condition: used, machine/vehicle number: LC594, Used Sidel Alsim PET bottling line for carbonated water and drinks - 14.000 bphTechnical Specifications & Performance DataThis complete PET bottling line is engineered for carbonated water and soft drinks, delivering consistent output and reliable quality for beverage production. It combines high-efficiency blowing, isobaric filling, labeling, packaging, and end-of-line automation into a cohesive used bottling line suitable for second hand industrial packaging operations.Production speed: 13,000–14,000 bottles per hourContainers: PET bottles, neck finish 28 1881Blow molder: Sidel SBO10, 10 cavitiesPreform handling: Sidel EBH 2050 preform hopperAir conveyor: Sidel-AlsimRinser/Filler/Capper monoblock: Sidel-Alsim PET Trybloc Asmojet 1T RV-P 48/60/10KRinser: 48 clamps, 1 water treatmentFiller: 60 isobaric valvesCapper: 10 headsPremix/Mixer: Sidel-Alsim, 30 m³/h outputBottle dryer: ACILabeling machine: Krones Contiroll, rotary, 15 dishes, PET wrap-around, roll-fedShrink wrapper: Acmi Fenix, film-only configurationHandle applicator: Smipack HA 35-50-70Palletizer: Alsim Valiant 1I 1P, fully automatic, push-typePallet wrapper: PM Pragometal OBS Rotomatic StandardAdvanced Automation & Control SystemsThe line integrates component HMIs and automatic control features at each station to streamline operation and changeovers. The isobaric filling block ensures precise filling for carbonated beverages, while the roll-fed rotary labeling system supports continuous, high-speed label application. Quick-change mechanical adjustments and format components help maintain uptime and reduce setup times in beverage production environments.Production Line Integration CapabilitiesDesigned for inline operation from preform loading through palletizing, the system features smooth bottle transfer via air conveyors and synchronized starwheels in the filling monoblock. It integrates upstream blowing with downstream labeling, shrink wrapping, handle application, and palletizing, creating a complete packaging machinery solution. The line is suitable for carbonated water and soft drinks and supports multiple PET bottle formats and heights associated with the 28 1881 neck finish.Machine Condition & Maintenance HistoryThis second hand line is available for sale and is presented in ready-for-operation condition. Component years range from 1996 to 2019, reflecting a well-curated selection of bottling equipment. Buyers can arrange inspection to assess performance, equipment condition, and overall line integration prior to deployment in beverage production.Operational Performance & VersatilityOptimized for carbonated products, the isobaric filler provides accurate CO₂ retention and foam control. The Sidel blow molder delivers stable bottle quality, while the Krones Contiroll rotary labeler ensures precise PET wrap-around label appli... Cedpfx Aloydn A Hjbehb

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, working width: 3,000 mm, overall weight: 5,000 kg, input voltage: 380 V, Equipment: documentation/manual, Celaschi TSA300DS double-blade squaring saw Mobile shoulder opening 3000 mm, controlled via touchscreen Minimum working width 200 mm 5+5 motor groups Chjdpfx Aszfvtnslbeb Slider width 65 mm Feed rollers with 400 mm pitch Pneumatic activation of the cutter block Automatic activation controlled by CNC Adjustable feed speed (m/min): 4-24

Condition: excellent (used), I sell the double end cutting and tenoning machine CELASCHI TSA 300. Working width up to 3000mm Feeding speed 3-18 m/min. Configuration left side / fix: 1 pc. cutting saw aggregate 4,0 KW 1 pc. moulding aggregate 5,5 KW Configuration right side / moving: 1 pc. cutting saw aggregate 4,0 KW 1 pc. moulding aggregate 5,5 KW Csdpfxovxu Uhe Albshb Material pressure feeding band from top Throughfeed machine. Very good condition. Available immediately.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 100 kW (135.96 HP), number of axes: 2, overall weight: 219 kg, table length: 1,200 mm, table width: 900 mm, Equipment: CE marking, documentation/manual, 1290 is a professional laser cutter for serious manufacturing. It has a through table, allowing you to cut materials and rolls of fabric of any length. The Wattsan CNC laser machine is built to have a 24/7 work capacity in series production. Wattsan 1290 ST can cut up to 10–13 mm and engrave wood, cardboard, acrylic, glass, rubber, stone, wool, etc. This model has a feature: you can remove the front wall and use the opened space to cut sheets and rolls of materials. It also has a waste collection container that will make the work much more pleasing. You can give our managers a call for additional details! Codpfeh Ucrbsx Albohb Wattsan 1290 ST characteristics: Working area: 1200x900 mm Laser power: 100-130 W Working table lowering depth: 40 mm Positioning precision: 0,03 mm Machine size: 1410 x 1790 x 670 mm + if it is on wheels 315 mm Packing size: 1880 x 1490 x 810 mm Weight: 368 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.