Balancing machine

Schenck AHF0820

Condition: used, functionality: fully functional, Used Schenck Balancing Machine H 50 V/B with used CAB 690 H measuring unit. (Can be upgraded to a new CAB 920 unit for an additional (18 000–20 000€) The machine comes with original foundation drawings, documentation and manuals. The machine can be test run in Kerava. Rotor Capacity - Rotor weight range: 20 – 6 000 kg - Maximum symmetrical load on pedestal bearing: 7 500 kg - Maximum symmetrical load on stand bearing: 3 750 kg - The machine can be loaded freely with lower weights when following recommended procedures. - Maximum rotor length between pedestals:1 600 mm (belt drive) Hfodsx Ein Sopfx Agfsf - Maximum diameter over machine base: 2 100 mm - Clamped rotor diameter ranges: 25–180 mm, 180–380 mm - Machine bed length: 3 500 mm - Balancing speed n depends on the rotor’s moment and must be selected to avoid overloading the drive. - Maximum permissible G·n² value: 1400 × 10⁶ kg/min² - Applies to a rigid symmetrical rotor mounted on pedestal bearings. - May be exceeded during dynamic tests on flexible rotors and strength tests. - End drive / FU motor: 7,5 kW - 4-speed gearbox: 120–2520 rpm - Belt drive BU 5 / FU: 7,5 kW - Unbalance Umar 0,5 gmm/kg: 0 gmm/plane

Condition: good (used), Year of construction: 1988, grinding length: 1,000 mm, grinding width: 550 mm, grinding height: 400 mm, grinding wheel diameter: 400 mm, grinding wheel width: 100 mm, Manufacturer: ELB-SCHLIFF Model: SWBE 010 ND Year of manufacture: 12-1988 Delivery time: immediately Electro-permanent magnetic clamping plate SAV 1000 X 400 mm Fine pole pitch 45-5 mm Electric straightening device with compensation Digital display vertical Hodpfx Aou Rqynegfsff Holder with grinding wheel max. 400 X 100 X 127 mm Spindle motor 7.5 KW 1435 min/1 Setting wedges Coolant system with universal paper belt filter Complete documentation

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 3,000 kg, Maximum Rotor Weight ---3000 kg (6613.87 lb) Minimum. Rotor Weight ---30 kg (66.14 lb) Maximum Rotor Diameter ---1400 mm (55.12 in) Minimum Shaft Diameter ---20 mm (0.79 in) Maximum Shaft Diameter ---300 mm (11.81 in) Motor power ---11 kW (14.75 HP) Drive Unit (Std.) ---11 kW (14.75 HP) Hodpfx Agor Dd Avefjff Balancing Speed ---0-3000 Rpm (25 Hz) (up and down adjustable) Drive Unit --- Only Belt or Shaft / Belt + Shaft Bed length ---3000 mm (118.11 in)

Condition: used, Year of construction: 2011, functionality: fully functional, DMG Gildemeister CTX 500 Alpha V6 - Year of manufacture: 2011 - Control: Siemens 840D shop turn Hfodpjylkuuefx Agfjf - Counter spindle - With Y-axis and C-axis - Turret: 12-position motorized VDI 30 Additional equipment: - Hydraulic chuck - Chip conveyor - Coolant system - Interface for bar feeder - Workpiece catcher with conveyor belt

Condition: new, Year of construction: 2026, These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Hfsdpfohl H Ubex Agfof

Condition: excellent (used), Year of construction: 2000, turning diameter over bed 20 mm turning diameter over slide rest 1200 mm turning length 3.000 mm centre distance 3000 mm digital readout 4 - Achsen bed width 800 mm spindle bore 122 mm turning speed range 1,80 - 355 U/min power requirement 22 kW taper in tailstock-quill 100 (1:20) dia. of quill 150 mm quill stroke 350 mm Hedoyy Sy Nspfx Agfeff voltage 400 V total power requirement 31 kW spindle nose Gr. 11, DIN 55027 weight of the machine ca. 10 t dimensions of the machine ca. 8,20 x 2,20 x 2,20 m - Serial No.: 75.217 - Rapid feed for carriage - 4-Axis DRO-System SINO

Condition: used, Year of construction: 2014, workpiece weight 300 kg workpiece length 1260 mm Hfodpfx Agsyrtw Ejfef diameter 99999 mm Like new CAB820

Year of construction: 2024, condition: ready for operation (used), An originally packaged Ecoclean spray-flood cleaning system with a vacuum-tight working chamber is available. Working chamber diameter 1: 650mm, working chamber diameter 2: 750mm, max. basket dimensions 1 X/Y/Z: 670mm/480mm/300mm, max. basket dimensions 2 X/Y/Z: 670mm/480mm/400mm, max. batch weight: 150kg, max. door opening angle: 135°, max. spray pressure: 2bar, filling volume: approx. 1750l. Machine dimensions X/Y/Z: approx. 3450mm/2000mm/2700mm, weight: approx. 4200kg. Documentation available. An on-site inspection is possible. The machine has never been unpacked. Hodpsxwcvaefx Agfjff

Condition: used, Technical details: table length: 2000 mm table width: 1800 mm table load: 12,5 t table adjustment - longitudinal: 1250/1400 mm table rotating: 360 motorisch ° table positioning: 4x90 ° Hfodsu N Ebdspfx Agfef feeds - longitudinal: 0,63 - 2.000 mm/min. height over floor: 920 mm voltage: 380 V total power requirement: 6 kW weight of the machine ca.: 7,6 t machine dimensions LxWxH: 3,8 x 2,25 x 0,95 m Rotary table conventional Bohrwerkstisch konventionell, Bedienung über Schalttafel T-Nuten nach DIN 650: a=28mm; h=49mm; b=52mm; c=21mm *

Year of construction: 2010, condition: used, Crane scale Schenck 1000 kg Hedpfeiwurgjx Agfeff