Used Buffalo for sale (17)

Condition: used, Year of construction: 2005, revolutions per minute 8000 U/min x-travel 1000 mm y-travel 500 mm z-travel 570 mm Control Siemens weight of the machine ca. 5000 KG Hodpfoud Al Hex Ah Njfb

Condition: excellent (used), Year of construction: 2012, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: 1311151215, turning diameter over cross slide: 870 mm, turning length: 2,000 mm, turning diameter: 400 mm, spindle bore: 72 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 268 mm, travel distance Z-axis: 2,000 mm, spindle motor power: 15 W, overall weight: 4,700 kg, coolant supply: 8 bar, tailstock quill stroke: 200 mm, number of driven tool stations in tool turret 3: 8, tool holder type of tool turret 1: VDI 40, Equipment: CE marking, USB port, centralized greasing system, type plate available, Machine in very good condition with C-axis and driven tools, Renishaw tool probe. Tool turret with 8 positions, all driven. Chip conveyor, oil mist separator. Three driven angle tool holders, three driven straight tool holders. 6 VDI40 tool posts, 2 steady rests, tailstock with hydraulic quill. Fagor 8055 control, RS, USB, and Ethernet (RJ) interfaces. DTR machine documentation, Fagor 8055 programming manual in English and Polish, PC communication software. Machine under power in Poznań, inspection arrangement possible. Tel. 602-58-23-51 Hodpfx Aex Tclpeh Njfb

Condition: ready for operation (used), functionality: fully functional, Schutte-Buffalo 1590 – hammer mill, 132 kW motor For sale: Schutte-Buffalo hammer mill, model 1590. Complete machine with start-up system and extraction ventilation. Designed for wood shredding (other materials negotiable), robust industrial construction. Configuration / Equipment Installed motor: 132 kW, 1500 rpm Control cabinet: star–delta start-up Hfsdpfx Ajx Hgxash Nsb Extraction fan (included): 30 kW Option to install 150 kW motor – engine available optionally for buyer Additional knives/hammers as replacements – included Technical data Weight: 3580 kg Rotor width: 910 mm Shaft diameter: 30 mm Knives/hammers: 90 mm Output: approx. 9 m³/h of dry timber (approx. 10% moisture), softwood

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 3515150, turning diameter over cross slide: 450 mm, spindle bore: 52 mm, turning diameter over bed slide: 600 mm, center height: 300 mm, turning length: 750 mm, quill diameter: 90 mm, quill travel distance: 120 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 10 rpm, swing diameter over cross slide: 450 mm, rapid traverse X-axis: 24,000 m/min, rapid traverse Z-axis: 24,000 m/min, travel distance X-axis: 305 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 750 mm, chuck outer diameter: 200 mm, spindle motor power: 17,000 W, Turning machine (Lathe) with driven tools, Y axis and measuring arm. Hfedpfx Ahownp Sxe Njb

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning length: 1,500 mm, turning diameter over bed slide: 475 mm, rotational speed (max.): 4,500 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,680 mm, Placing a bid obliges you to pick up the item on time by March 31, 2025! TECHNICAL DETAILS Control: Fagor CNC 8055 Hsdpfx Ahsv Ifw So Nsfb Turning diameter over recess: 710 mm Turning diameter over cross slide: 240 mm Turning diameter over bed: 475 mm Max. turning length (with turret): 1,500 mm Spindle Bar capacity: 51 mm Recess of spindle nose: 248 mm Spindle nose: ASA D1-6 Spindle bore: 65 mm Speed range: 100 - 4,500 rpm Spindle power: 11 kW Max. torque: 29.3 kgm Tool handling Tool positions: 8 Square tool shaft height: 25 mm Shaft diameter for boring bar: 40 mm Tool holder: VDI 30 Indexing time: 0.42 s Travel paths X-axis: 260 mm Z-axis: 1,680 mm Rapid traverse speeds Rapid traverse X-axis: 15 m/min Rapid traverse Z-axis: 15 m/min Tailstock Max. workpiece weight (with tailstock): 1,500 kg Tailstock quill taper: MK 5 Quill range: 150 m Quill diameter: 80 mm Quill taper: MK 5 Bed width: 355 mm X-axis motor: 7.3 Nm Z-axis motor: 11.9 Nm Chuck dimensions: 200/4,000 mm MACHINE DETAILS Dimensions (L x W x H): 3,520 x 1,935 x 2,022 mm Weight: 3,150 kg Foundation: 2,920 x 2,055 mm No additional tools or clamping devices included.

Year of construction: 2011, condition: ready for operation (used), X-axis: 300mm, y-axis: 620mm, z-axis: 400mm, positioning accuracy: ±0.005 inch, repetition accuracy: 0.005 inch, rapid traverse: 25m/min, feed rate: 10m/min, air pressure: 6kg/cm², air consumption: 400l, pump motor: 30W, delivery rate: 2.2cm³/s, pump pressure: 8kg/cm², tank capacity: 2l, pump electrics: 220V/ 3PH/ 1.2A, max. delivery rate: 130l/min, control: Heidenhain TNC 620, connected load: 15kVA, length: 3000mm, width: 2050mm, height: 3020mm, weight: 3020kg. max. flow rate: 130l/min, control: Heidenhain TNC 620, connected load: 15kVA, length: 2984mm, width: 2050mm, height: 2420mm, weight: 3020kg. Operating hours control: 22,261h, machine: 22,414h, programme: 10,507h, spindle: 7695h. Fully functional, spindle was recently replaced, the built-in oil skimmer in the cooling water tank is not functional. With documentation. On-site inspection is possible. Hedpfxewc A Rkj Ah Nsfb

Condition: used, Year of construction: 2006, turning diameter Ø30/300mm mm turning length 3055mm +/-0.3mm mm Hfjdougnxdepfx Ah Nob

Condition: used, Year of construction: 2019, operating hours: 19,900 h, functionality: fully functional, machine/vehicle number: 3515170, turning diameter over cross slide: 450 mm, spindle bore: 52 mm, turning diameter over bed slide: 600 mm, center height: 300 mm, turning length: 1,250 mm, quill diameter: 90 mm, quill travel distance: 120 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 10 rpm, swing diameter over cross slide: 450 mm, rapid traverse X-axis: 24,000 m/min, rapid traverse Z-axis: 24,000 m/min, travel distance X-axis: 305 mm, travel distance Z-axis: 1,250 mm, chuck outer diameter: 200 mm, spindle motor power: 30,000 W, Turning machine (Lathe) with driven tools and measuring arm. Hfedewnqk Ajpfx Ah Njb

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 390 mm, table load: 350 kg, rotational speed (max.): 8,000 rpm, tool diameter: 100 mm, Placing a bid obliges you to pick up the item on time by March 31, 2025! Hedpfx Ahjv Ifl No Nofb TECHNICAL DETAILS Control: Fagor 8055 X-axis: 760 mm Y-axis: 430 mm Z-axis: 390 mm Max. rapid traverse: 24 m/min Spindle motor Continuous power: 5.7 kW Continuous power (1 hour): 7.5 kW Max. speed: 8,000 rpm Work table Dimensions: 900 x 410 mm Max. load: 350 kg Tool handling Max. tool length: 200 mm Max. tool diameter: 100 mm Max. tool diameter with free adjacent positions: 130 mm Max. tool weight: 8 kg Tool change time: 10 s Max. number of tools: 16 MACHINE DETAILS Length: 2.2 m Width: 2.0 m Height: 2.4 m Weight: 3,000 kg Connected load: 15 kVA No additional tools or clamping devices are included.

Condition: used, functionality: fully functional, power: 210 kW (285.52 HP), fuel type: diesel, color: yellow, tire size: 710x26,5, tire condition: 40 %, Year of construction: 2016, operating hours: 16,600 h, machine/vehicle number: A080191, Equipment: additional headlights, air conditioning, cabin, lighting, Ponsse Buffalo 8W forwarder K100 crane, Grippen 035 grapple Central lubrication system Hfodpfjwd E Tkjx Ah Nsb LED lighting 2 previous owners

Condition: refurbished (used), Year of construction: 2005, operating hours: 6,149 h, overall weight: 19,000 kg, Doppstadt DW 2560 Buffalo - Year of construction 2005 - Operating hours 6149 Hjdpfsw Ebapjx Ah Njfb - Engine Mercedes Benz 354PS - Roller : 17 teeth - Overband magnet - Remote control - Hydraulic drive ( self drive) Machine is overhauled and immediately available

Condition: new, functionality: fully functional, power: 235.36 kW (320.00 HP), axle configuration: 4x4, fuel: diesel, color: red, gearing type: semi-automatic, emission class: euro6, Year of construction: 2025, Equipment: air conditioning, airbag, all wheel drive, central locking, differential lock, trailer coupling, From our portfolio of new vehicles, we offer: Hedpfx Ahsxzu Eho Nofb TLF 4000 All-wheel drive on an off-road MAN TGM 18.320 all-wheel chassis Our Water Buffalo on MAN Hardly any terrain is too difficult for it. Calm and powerful, it reliably delivers its load to the destination. At the incident site, it demonstrates its full capabilities—transporting crew, equipment, and sufficient extinguishing agents to the scene, supported by a high-performance pump. Chassis: • MAN TGM 18.320 4x4 EURO 6 with 320 HP (235 kW) • Automated transmission • Off-road tires • Single wide tires matched to track width for maximum off-road capability Cab: • Standard crew cab (1+5) in RAL 3000 (fire red) • Air conditioning and auxiliary heater • Standard 4 SCBA mounts in the crew compartment Superstructure: • High-quality frame-style superstructure made from stainless and corrosion-resistant materials • Folding steps for each side-mounted equipment compartment • Individually customised stainless steel equipment storage solutions • Walkable, non-slip vehicle roof Vehicle pump / Extinguishing agent tank: • Maintenance-free combined normal/high-pressure pump TITAN S40HP FPN 4000-10 • PUMP & ROLL capable • Output: 4,000 l/min at 10 bar and 400 l/min at 40 bar • Integrated, infinitely variable foam proportioning system • Water tank 5,000 l with integrated 500 l foam agent tank • Auxiliary heater in the pump compartment Firefighting equipment: • High-pressure rapid intervention reel with 50 m rigid hose • Roof-mounted foam/water monitor, 2,000 l/min • Self-protection system with 4 spray nozzles in front of the wheels Safety and lighting: • LED lightbar on the roof / 2 LED front flashers • Pneumatic special signal system Martin-Horn • 100 W PA system with announcement unit • Rear-view camera • Comprehensive LED lighting in crew and all equipment compartments • LED scene lighting on the superstructure and additional spotlight • Pneumatic LED light mast with remote control • Hygiene board available on request We would be happy to provide you with a detailed offer and present the vehicle to you at our site in Berlin. All details provided to the best of our knowledge and belief, without guarantee for completeness or accuracy. This advertisement constitutes information and is not a binding offer. Subject to prior sale!

Condition: used, Year of construction: 2017, operating hours: 6,777 h, functionality: fully functional, Basic version DW 3060-F “Buffalo” (Carrier Machine) Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EC directive 50 mm EC towing eye incl. mounting bracket Hydraulically adjustable support leg Splash guards (inner and side mudguards) Permissible total weight 25,000 kg Tyres: 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 360 kW at 2,000 rpm, complies with EUROMOT IV emission standard Reinforced planetary gear 380 kW Additional hydraulic connection 20 l/min Hydraulic preparation for drive system Fuel tank 2 x 300 litres Rear conveyor: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic centre section Longitudinal conveyor: belt length 3,300 mm, belt width 1,000 mm Hedpfoxx Tfzex Ah Njfb Centrally arranged lubrication strips 24 V electrical control system Roller reverse function via electric motor when engine is at standstill Automatically reversing fan Chassis with level control Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Optional equipment: Hydraulic drive system SHREDDING SYSTEM SIZE “L” 600/4 COMPLETE Additional hydraulic connection 70 l/min Radio remote control Comb extension Size “L” Limiter Mounting for comb extension Limiter Size “L” Overband magnet for rear conveyor Frame for overband magnet Spraying system

Condition: used, maximum load weight: 26,200 kg, overall weight: 38,100 kg, axle configuration: 2 axles, first registration: 11/2001, next inspection (TÜV): 10/2026, Used EMPL TS20 Semi Low Loader---- * with 2 hydraulically steered axles & air suspension * Payload: 26,200 kg (23,600 kg) * Perm. total weight: 38,100 kg (35,500 kg) * Lowbed length: approx. 8,500 mm * Transport height: approx. 250 mm above road surface * First registration: 29.11.2001 * Next technical inspection: 10/2026 * Air suspension and electrohydraulic steering can be operated from the driver’s cab The following forestry machines, among others, have been transported: * Timberjack 1110 * Timberjack 1270 + 1470 * Valmet 860 * Valmet 921 Hfedjxn D I Ejpfx Ah Nob * Ponsse ERGO * Ponsse Buffalo Price: €16,790.00 net We hope to have made you an interesting offer. For further inquiries, please contact us by phone at ? 0. !!! Subject to prior sale and errors !!!

Condition: new, Year of construction: 2025, INJECTOR Sandblasting Cabinets The Benefits and Applications of Injector Sandblasting Cabinets Injector sandblasting cabinets use an air-driven venturi system to create a vacuum that draws abrasive media into the airstream. The abrasive media is then propelled at high velocity from the blast nozzle, where it impacts the surface to be cleaned or prepared. Injector sandblasting is typically used for lighter applications. Our SAPI injector sandblasting cabinets—including the Elk, Ram, and Buffalo models—use an air-driven vacuum system that draws the media to the front of the nozzle, where it meets the airstream and then "shoots" the mixture onto the workpiece. These cabinets are ideal for lighter applications and offer efficient and cost-effective solutions. ----- The Widder 70/100 injector sandblasting cabinet is a robust and reliable solution for demanding surface preparation requirements. Featuring a large work surface, a right-hand side door, and an efficient dust control system, this cabinet is designed for use with various types of abrasives and can accommodate small to medium-sized parts. It is ideal for industrial applications such as metal fabrication shops and workshops. ----- Hfjdpfx Ahjwf Dwws Nob The Elch 100/130 injector sandblasting cabinet from SAPI is a compact and versatile solution for medium to large parts. Equipped with a large viewing window, two side doors, and an efficient filtration system, this cabinet allows for easy monitoring of the blasting process and ensures a clean and safe working environment. The Elch is designed for use with a wide variety of abrasives. Its user-friendly design and efficient blasting process make it an ideal choice for lighter applications in industries such as automotive, aerospace, and manufacturing. ----- The Büffel 140/180 injector sandblasting cabinet is a robust blasting machine designed for demanding applications. It features an air-driven venturi system that draws abrasive into the airstream and expels it at high speed from the blast nozzle. The Büffel cabinet is also available with an integrated filtration system that helps reduce dust and improve air quality during the sandblasting process. Loading heavy parts is also easily possible thanks to the front door using a forklift or crane. With its robust construction and efficient blasting performance, the Büffel 140/180 injector sandblasting cabinet is an ideal choice for industrial applications requiring high throughput and minimal downtime.

Condition: refurbished (used), Year of construction: 2014, operating hours: 7,275 h, Doppstadt DW 3060 Buffalo type C - Year of construction 08/2014 - Operating hours 7275 - Engine Mercedes Benz 430 HP - AD Blue Hedpfoxb Et Njx Ah Nsfb - Roller : 21 teeth - Overband magnet - Remote control - Hydraulic drive ( self drive) Machine is overhauled and immediately available

Condition: refurbished (used), Year of construction: 2009, Stationary single-shaft shredder Doppstadt DW2560E 1 Buffalo - Year of construction 2009 - Electric motor 315kW - Central lubrication - Control cabinet - remote control - Weight 26500Kg Machine is completely overhauled Hfedpfx Asxmvpfjh Njb