Veneer and panel saw

SCHEER FM 8 - 3100

Condition: used, Year of construction: 1992, Manufacturer: Scheer Lrjdpfexdpkksx Adksw Model: FM8-3100 Used machine Not operational Pressure beam is warped; needs to be straightened Year of manufacture: 1992 Equipment and technical data: Cutting length mm: 3,100 Cutting height mm: 45 Saw blade diameter mm: 180 Depth to stop mm: 500 Main motor kW: 1.8 Pneumatic clamps Rear fence Weight approx. kg: 400 Location: Röllbach Availability: short notice

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. High extraction capacity with low space requirement Maximum performance in this class Very quiet Range of application Clean air extraction systems for wood chips and wood dust Designed for commercial use For all woodworking machines with corresponding extraction nozzle diameter Can also be used for several dust sources High-quality, sophisticated construction Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, thus flexible in use Large inspection openings Large-dimensioned, mobile spill container with clamp and spill collection bag Lodpfscnw U Dex Adkerw unit already completely assembled at delivery, therefore quickly usable mobile Description of the filter Ultra compact with maximum filter area Filter material made of polyester fleece, aluminized, washable and therefore with long service life Filter standard in antistatic design tested and approved according to category M-BIA Filter resistance monitoring via differential pressure box, adjustable with warning lamp on the control box The fan is connected downstream of the filter Equipment details: With innovative locking device for safe container positioning All units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. Scope of delivery: Metal fan wheel Inspection opening

Condition: used, No. 04473 Veneer saw Scheer FM 8 - 3100 Used Jointing and fine-cutting machine for joint-tight and splinter-free sawing of veneer, chipboard, blockboard or solid wood Strip cuts are very easy to make Ledpfxjw A Acto Adksrw Rear table is approx. 470 mm wide The clamping beam is operated pneumatically The saw unit is guided by hand Cutting length 3100 mm Cutting height max. 45 mm Motor 1.8 kW Transport dimensions approx. 3800 x 1100 x 1400 mm LWH Weight approx. 400 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 081263, Connecting value 380V 1,85kW 4,8A pressure beam length 3100 mm pneumatic material clamping with hand lever valve chassis Lrodpfx Ash U Dbrsdkew stop ruler 520 mm long 6x support brackets

Year of construction: 1998, condition: good (used), I sell the multiple drilling machine with inserting KOCH Sprint-PTP Year: 1998 Number of drilling spindles 1 Number of inserting heads 1 Programming CNC-driven Z-axis Working width 1200mm Working height max. 36mm Lredpfed Exwgsx Adksw Available immediately

Condition: used, used, good conditionmanufactured by Scheertype FM 8-3100Masch.-No. 83077motor 1,85 kWcut length 3100 mmsaw blade diameter ca. 160 mmpneumatic clampingrear extented tableself-exhaustrequired space ca. l x w x h mm4000 x 1000 x 1300weight ca. 450 kglocated in  97447 Gerolzhofensale in current condition as seen- free on truck - Ljdpfx Aevwftxjdkerw

Condition: used, Year of construction: 1982, Used machine Condition: good Equipment and technical data: Cutting length mm: 3,100 Cutting height mm: 45 Saw blade diameter mm: 180 Depth to stop mm: 500 Main motor kW: 1.8 Pneumatic clamp Rear fence Lodpfxjw I Ulps Adksrw Weight approx. kg: 400 Location: Hochheim Availability: short term

Condition: new, Year of construction: 2025, Robland products are built by Werkhuizen Landuyt, located at Bruges, Belgium. BM 3000: • Saw aggregate for slot making. Max depth 10 mm • Left 5 mm bit for drilling • 20mm bit for minifix-system • 8 mm spindle for drill and limited milling applications • 35 mm bit for hinges • The thickness of the panels to be processed should be between 12 and 40 mm Lrsdpfsd Hz Niex Adksw • The machine is equipped with a drilling head with 4 chucks and an integrated sawblade • Y axis reach/stroke: Drilling: 900 mm Grooving: 860 mm Technical data: • Y axis reach/stroke • Drilling: 920 mm • Grooving with sawblade: 860 mm • axis is supported 3000 mm • Z axis plate thickness from 12 mm up to 40 mm • A axis 360° • Movement speed: 20m/min • Min. dimensions workpiece (X) 300x (Y) x 120 x (Z) 12 mm • the machine is equipped with a bore head with 4 chucks and integrated sawblade. • Max/min diameter bore heads 3 mm – 35 mm • Saw blade operates in the X-axis • Max. Depth saw blade grooving: 10 mm • Motor 1 HP 3*380 V / 3*220 V • Minimal required dust extractor capacity 2300 m³/h

Condition: ready for operation (used), Technical characteristics pressure 2.2 kg / cm² 18 kW diathermic oil boiler timed pressing digital display Power and Motors Voltage: 400 V Pluging: Three-phased Power: 20 Kw Overall dimensions Lrjdet N Autspfx Adksw Lenght: 3500 mm Width: 1500 mm Weight: 3200 Kg

Condition: new, Working width (finished size) 23 – 180 mm Working height (finished size) 6 -105 mm Min. length of single workpiece 300 mm Feed speed 6 – 12 m/min Motor power horizontal spindles 2 x 7.5 kW Motor power vertical spindles 1 x 7.5 kW Spindle speed 6000 rpm Ljdpfx Aeiiv Dcjdksrw Spindle diameter 35 mm Clamping length vertical spindles 120 mm Clamping length horizontal spindles 190 mm Manual lubricant pump Profile capacity without axial adjustment on vertical spindle 10 mm Los roller integrated in the outfeed table Suction DM 4 x 120 mm Including OPTIONS: - Motor-driven feed roller in front of the planer with lever for quick changeover - Front vertical printing unit in front of the left vertical spindle - Feed table length 2300 mm - Tool package consisting of 4 planing heads and a joint rebate cutter