Motorized Bending Machine

SCHECHTL MAX-F 310 CNC

Condition: new, Year of construction: 2026, MBM series machine • easy start-up in the engine efficiency class • designed for smooth and efficient one-person operation • produce complete profiles in one operation and repeat them exactly at any time • Wear-free and maintenance-free direct eccentric drive Standard equipment: • 1 sharp rail 20°, radius 1 mm, offset, 66/24 mm for the pressure beam • 1 insert rail 68/10 mm and 68/24 mm for the bending beam Rjdpfxowf Hghj Aahew • Motorised rear stop 6-750 mm • foot switch • 16 A connection plug with 5 m cable (within the EU) • connection voltage: 3 x 400 Volt, 50 Hz (within the EU)

Condition: new, Year of construction: 2026, Efficient, quiet, and powerful mechanical machine Technical specifications: Working length: 4040 mm Total length: 5352 mm Depth: 2232 mm Working height: 950 mm Total height: 1924 mm Weight: 5,000 kg Maximum bending thicknesses: Steel: 1.5 mm Aluminum: 2.00 mm Stainless steel: 1.00 mm Copper: 2.00 mm Galvanized sheet: 3.00 mm Standard equipment: • 1 bending rail, 20° with sharp nose, radius 1 mm, offset, 66/24 mm for the clamping beam • 1 insertable rail, 10/100 mm and 24/100 mm for the bending beam • Foot switch (MAF 400/CNC model delivered with a second foot switch) • Soft start for the bending beam • Electrically driven back gauge, 8-1000 mm • 5 m power cable with 32 A mains plug (EU version) • Supply voltage: 3 x 400 V, 50 Hz (EU version) CNC S-Touch control: From profile concept to bending precision in record time Standard features at no extra charge: • Graphical display of the bending sequence for the selected program • Graphical representation of sheet position before every bend • Operator guidance – each work step visually explained via the graphic control system • Programming without submenus • Profile correction by direct touch in the desired section of the profile • Programmable angle correction • Set repeat cycles for special radius arcs • Cutting program for RSL rotary shears • Easy mode for: single bends, back gauge, bending angle, lifting height, closing edges • Profile search possible by name, sketch selection, and profile drawing on the touchscreen • 21.5-inch LCD touchscreen with best-in-class graphics Rodpfx Aasx Hyhbjhow • USB port for program backup and transfer • Non-volatile memory for over 3,000 programs • Freely assignable program names (profile names) • Registration of produced quantities and machine operating time • 16 languages • Remote support (Team Viewer) • Soft start for bending beam • Back gauge with drive, 6-1000 mm • Foot switch For EU market: • 16 A plug with 5 m power cable • For MAF and MAZ models, 32 A plug with 5 m power cable

Year of construction: 2023, condition: new, ! Offers for customers from Baltic states only: Lithuania, Latvia, Estonia. Guillotine RAPIDO is fast reliable shearing machine. Depends on sheets length there are guillotines with different working lengths available: 1300 mm / 2600 mm / 3200 mm / 4100 mm. Machine can do up to 35 cuts per minute. The drive system with eccentrics, pulldown rods, and hold down system which can be positioned as close as 2.5 cm from the knives allow for easy and expedient trimming of narrow strips. RAPIDO guillotine shear is equipped with squaring arms on both sides and the LED cutting line light. Available working lengths: 2600 mm / 3200 mm / 4100 mm Rjdpfx Aajixz D Ushew

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: Rodpeqt Dmyefx Aahjw - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), Year of construction: 2019, Industrial robot Manufacturer: Kuka Type: KR60 HA Year of manufacture: 2018/2019 Few operating hours Reach: 2033 mm Weight: 665 kg Payload: 60 kg Kuka KRC4 controller Weight: 150 kg Software version: V8.3.40 Kuka touch panel Kuka connecting cables 24626 Redpfx Aaon Utbgjhjw

Condition: used, 7 pieces Bending tools for a swivel bending machine Rsdpfxob D Ry Ro Aahsw Length 3000 mm

Condition: good (used), functionality: fully functional, Year of construction: 2022, Electric bending machine in good condition, with automatic back gauge. Rodpfxey Ucycj Aahsw Specifications: Model: SCHRÖDER MAKU Year: 2022 Made in: Germany Working length: 3,200 mm Bending thickness: 1.5 mm Bending beam tooling: 10 and 25 mm Controller: Classic bend Motor: 2.5 kVA Weight: 2.7 tons If you have any further questions, we will be happy to answer them.

Condition: new, Bernardo swivel bending machine with segmented upper, lower, and bending beam TB 1020 Flex Working length 1020 mm Max. sheet thickness (400 N/mm2) 2.0 mm Max. opening width with segments 48 mm Max. opening width without segments 150 mm Max. clearance height closed 125 mm Bending angle 0 – 135° Back gauge 600 mm Working height 900 mm Width 1400 mm Depth* 1070 mm Rjdpfxod Hxm Ie Aahew Height 1260 mm Weight approx. 430 kg * with back gauge Features Piano inserts in the upper, lower, and bending beam provide a large number of bending possibilities. Casing and special profiles with opposing bends can be easily produced with these models. Universally applicable bending machines for sheet metal workshops and repair shops. Simple swiveling movement of the bending beam via a handle. Easy adjustment of the upper beam for efficient work. High upper beam for producing high-flanged profiles. Large-sized flat guide for precise work. An auxiliary cylinder supports the bending process during hemming. Scope of delivery Segmented upper, lower, and bending beam Back gauge Corner segment left / right each 75 mm | 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 200 | 270 mm

Condition: used, Year of construction: 1991, Used machine Year of manufacture: 1991 Equipment and technical data: - Complete drying system with trolley, high-performance radial fan, electric heater, - Air inlet and outlet flaps, safety thermostat, spray device - Lifting swivel door for convenient opening and closing of the dryer - Interior lining: all side walls are made of seawater-resistant special aluminum - The stainless steel floors are permanently resistant to aggressive wood preservatives such as tannic acid, etc. - The sealing of the connecting joints is absolutely resistant and also allows steaming in the system - Stacking dimensions: 530 x 105 x 115 cm - Stacking volume: 6.4 m³ Rjdpfx Ajy R Ha Sjahew - External dimensions: approx. 690 x 140 x 200 cm - Heater: 12 kW - Motor: 1.1 kW / 400 V - with MP 902 control system Availability: short notice Location: 63934 Röllbach

Year of construction: 1989, condition: good (used), strip width: max. 1.840 mm strip thickness: 0,3 – 3 mm blade shaft Ø: 224 mm blade Ø: 350 mm Rjdpfxeg Iih Nj Aahsw