USED HORIZONTAL FLOOR-BORER MANUF. SCHARMANN, MODEL WB 125

SCHARMANN WB 125

Condition: used, max. wheel diameter 180 mm gear width 45 mm max. module 4 min. module 0,5 stroke length max. 0 - 52 mm Lrsdpfx Apjtycg Sovjl spindle taper innen MK 4 table diameter 160 mm table bore diameter 75 mm no. of strokes 355 - 630 Hub/min feed range 0,008 - 0,4 mm/Hub dimensions of the machine ca. 2,30 x 1,50 x 2,36 m power capacity 6 kW weight of the machine ca. 2.500 kg With rack and pinion unit Change gear set Year of construction: Approx. 1981

Condition: ready for operation (used), Year of construction: 2001, spindle motor power: 45,000 W, total height: 2,120 mm, overall weight: 11,500 kg, controller manufacturer: SIEMENS, controller model: 810 D, product length (max.): 5,400 mm, number of axes: 2, This Weiler E120x3000 was manufactured in 2001. It features a center distance of 3000 mm, center height of 600 mm, and a swing diameter over bed of 1200 mm. The spindle bore is 165 mm, and it offers a robust main drive with a power of 45/37 kW. Ideal for heavy-duty turning, this machine includes accessories like a lathe chuck, faceplate, and a steady rest. Contact us for more information about this machine. • Working area: • Center distance: 3000 mm • Center height: 600 mm • Swing diameter over bed: 1200 mm • Swing diameter over cross slide: 830 mm • Cross slide travel: 590 mm • Bed slide guide length: 860 mm • Turning tool cross-section (H x W): 40 x 40 mm • Tool holder: Parat size 4 • Turning spindle: • Spindle head DIN 55027 / 55026, size 15 • Spindle bore: 165 mm • Main spindle taper: metric 171 • Main drive: • Drive power (60% / 100% ED): 45 / 37 kW • Max. spindle torque: 8000 Nm • Speed range gear stage 1: 1–280 rpm • Speed range gear stage 2: 4–900 rpm • Tailstock: • Quill diameter: 140 mm • Quill stroke: 300 mm • Quill internal taper: MK 6 • Machine dimensions and weight: • Overall length: 5400 mm (without chip conveyor), 6535 mm (with chip conveyor) • Overall width: 2600 mm • Overall height: 2120 mm • Machine weight: 11,500 kg • Overhaul services: Lrjdpfxex D Hz Tj Apvsl • Hardening and grinding of all bed guides • Grinding of tailstock guides • Overhaul of the complete bed and cross slide assembly (grinding/scraping all guideways) • Renewal of the bed slide's sliding lining • Renewal or relining of the keyways and bottom guides • Renewal of all wipers • Replacement of all belts • Overhaul of the main spindle assembly in the headstock • Renewal of the X-axis including bearings • Renewal of the Z-axis including bearings • Overhaul of the tailstock quill (MK 6 taper regrinding), replacement of spindle and nut • Adjustment of the tooling system • Replacement of the main spindle motor • Checking of the auxiliary motors (X- and Z-axis) • Overhaul of existing safety devices (sliding hood/jaw guard) • Replacement of all rotary, toggle, and limit switches • Replacement of the spindle and handwheel encoder • Replacement of the movable cables and coolant hoses in the work area • Replacement of the central lubrication unit • Renewal of the energy chains • Painting according to specifications (standard textured basalt and light gray) • Assembly and geometric inspection of the machine according to DIN 8605 Additional equipment • 1x used lathe chuck Ø630 mm with various jaws • 1x used faceplate Ø1100 • 1x used steady rest, max. Ø300 • 1x used chip conveyor

Condition: used, Year of construction: 1977, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0,001-0,030 mm/Ø 0-0,95 mm/Ø ±8 ° longitudinal feed of the table 1300 mm table speeds 0,02-6 m/min 130 kg 130 inkl. Spannugkg kg 70 mm total power requirement 6,5 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 4,2 x 2,0 m Neu geliefert an Universität. 2018 übernommen. Dann komplett bei BEMA gewartet und an an Einmannbetrieb geliefert. Nun wird die Maschine nochmal gewartet und Tischgeometrie neu hergestellt. 2-Achsen-Digitalanzeige Fagor nachgerüstet. Lrsdpfxsynmpge Apvol -Reitstock mit Feinverstellung -Innenschleifeinrichtung -Kühlmittelanlage Zubehör auf Anfrage

Condition: used, Year of construction: 1996, spindle passage 80 mm max. turning diameter 395 mm Max. Turning length 750 mm control System TX 8H Ledpfx Apsxbtqvsvjrl max. Spindle speed 3.150 U/min. CNC lathe | TRAUB - TNA 400 The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags:TNA400 | TNA-400

Condition: used, Year of construction: 1982, spindle diameter 90 mm x-travel 900 mm y-travel 900 mm Lredpfx Apstv H Ucevel z-axis 1200 mm w-axis 800 mm table surface area 900 x 1200 mm rotation movement 360 Grad table load 6,0 t turning speeds 25 - 1400 U/min spindle taper ISO 40 voltage 380 V / 50 Hz drive milling spindle 9,2 kW total power requirement 35 KVA weight of the machine ca. 10 t dimensions of the machine ca. 4,5 x 2,8 x 2,5 m • Machine had been completely refurbished in 1994 by the manufacturer • new switch cabinet, • new Servo-drive BOSCH and HEIDENHAIN-control TNC 360,(3D control) • valve plate Ø 600 mm. • traverse distance: 150 mm The machine is currently not ready for demonstration due to a fault in the electrical system.

Condition: good (used), Year of construction: 2011, Ref. -No.: 10622 Manufacturer: BLANSKO Type: SKD 50 Year of construction: 2011 Type of control: CNC Control: SIEMENS SINUMERIK 840 D Storage location: Halberstadt Country of origin: Germany Z - stroke: 1950 mm Turning Height: 4130 mm Faceplate Diameter: 4770 mm Swing Diameter: 5300 mm Max. Load on the face plate: 100000 kg Traverse path of the crossbar: 3600 mm Adjustment speed of the crossbar: 500 mm / min Further information: Pickup magazine with 8 tool holder positions Automatic clamping of the tool holder in the ram 1x straight boring head 1x 90° angle head (not in the pickup magazine) Ledpjym Nfzjfx Apvorl 1x set of jaws The machine can be inspected under power.

Condition: good (used), Year of construction: 2019, machine/vehicle number: 24451.19, Offer 25359 Lrodpfx Apsxup Rfjvel Technical Data: - Cutting capacity at 90° (round): 250 mm - Cutting capacity at 90° (flat): 275 x 180 mm - Miter adjustment to the left - Cutting capacity at 45° (round): 200 mm - Cutting capacity at 45° (flat): 190 x 180 mm - Cutting capacity at 30° (flat): 130 x 110 mm - Material support height: approx. 920 mm - Saw band dimensions: 3100 x 27 x 0.9 mm - Infinitely variable cutting speed: 15 to 100 m/min - Hydraulic lifting and lowering of the saw frame - Upper travel limit of the saw frame - Infinitely adjustable cutting pressure: 0 – 10 m/min - Hydraulic material vice - Micro-spray cooling system - Total drive power: 400 V / 2.2 kW - Required space approx.: W 2400 x H 1600 x D 1800 mm - Weight approx.: 1300 kg - 3 x Roller conveyor, each 1500 mm

Condition: used, Year of construction: 1998, turning diameter over bed 0400 mm turning diameter over slide rest 260 mm turning length 1500 mm centre height 200 mm centre distance 1500 mm spindle bore 50,8 mm speeds 20- 3150 U/min feeds longitudinal slide 0,01 - 3,24 mm/U feeds cross slide 0,005- 1,62 mm/U weight of the machine ca. 2 t dimensions of the machine ca. 3,35 x 1,4 x 1,9 m Lrjdpfx Apjxp Rzbovsl voltage 400 V connected load 7,7 kVA With chuck, Multifix toolholder and digital readout.

Year of construction: 2011, condition: ready for operation (used), - USED - TRAVELLING COLUMN CNC MILLING MACHINE WITH ROTARY AND SHIFTING TABLE LONGITUDINAL TRAVEL: 8000 mm TRANSVERSAL TRAVEL: 1500 mm VERTICAL TRAVEL: 2500 mm RAPID FEEDS L-T-V: 35 m/min TABLE SIZE: 2000 x 2000 mm TRANSVERSAL TRAVEL OF THE TABLE: 1500 mm MAX ADMITTED LOAD: 15000 Kg HEAD: A/B AXIS AUTOMATIC ; CONTINUOUS ; ISO 50 ; 7000 rpm; 49 kW; 1180 Nm TOOL MAGAZINE: CHAIN-TYPE ; 80 POS CONTROL UNIT: HEIDENHAIN iTNC 530 Lodpfxswl R Agj Apverl ACCESSORIES: SWARF CONVEYOR ; PORTABLE HANDWHEEL ; LASER TOOL SETTER NOTE: WITH ROTARY TABLE 1500X1500 mm; MAX ADMITTED LOAD 15000 Kg

Condition: used, functionality: fully functional, machine/vehicle number: D20E/8022, Offer Number: D20E/8022 Machinetype: multiple wire drawing machine - dry Info: straight through Lrjdpewi Tidofx Apvel Make: VEB Type: 8 Block Constr. year: inlet wire diameter: 2,5 mm finished wire diamter: 0,8 mm number of drafts: 8 diameter of capstan: 400 mm speed -meters/sek: 15 m Location: Europe