Stop for miter saw

Schüco mit Maßeinheit 2000 mm

Condition: like new (used), Year of construction: 2024, Overhauled: 2024 Year of manufacture: 1994-2000 Saw blade 560 mm Motor power 6,5 / 8,0 KW Speed 1500/3000 min-1 Cutting speed 2100 - 4200 m/min Saw height control: electronic Working range square max.: 170x170 mm Working range flat max.: 300x150 mm Working range round max.: 200 mm Saw feed 0 - 40 mm/s infinitely adjustable Cutting length 5-950 mm (9999 mm multiple stroke) Feed speed max. 500 mm/s Weight approx. 1900 kg Dimensions LxWxH 2200mm x2700mm x1950mm The machine is in mint condition, both technically and visually, following a completed retrofit. Due to its equipment and design, the machine can be used very efficiently for a wide range of applications. The programmed HMI control system ensures simple and very profitable operation of the machine. The soundproof cabin reduces noise emissions to a minimum. The machine is generally overhauled in our company at the customer's request. Among other things the following points will be renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI user interface - Replacement of the ball screw - Replacement of servo motor and servo inverter - New electrical components - New pneumatic lines - New pneumatic components - Overhaul or replacement of all pneumatic cylinders - Renewal of the valve terminal - Optimization of extraction performance - Overhaul of minimum lubrication system - Replacement of general wear parts - Overhaul of the cab The machine also has: - Soundproof cabin - Splitting extension (for a high-quality cutting surface without return marks) - Height control fully electronic Ijdpfjuiy Hrex Ahyjih Warranty: Unless otherwise agreed, we provide a 6-month guarantee on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the guarantee. Optional: - Mass clamping device for parallel sawing of several workpieces - Flat magazine for automatic feeding of up to 6 m long primary materials - Roller conveyors for primary material - Reinforced motor 18.0 KW (frequency-controlled) - Delivery and installation on your premises - Training of your employees

Condition: good (used), The Bystronic glass cutting line for split band dimensions (Maximum 3300 x 2550 mm) Service/spare parts are provided by Hegla, who purchased Bystronic. Iedpfx Aot Et Icshyoih 1 Bystronic KTR tilting table, Serial No. E9801016-1, o Tilts with built-in hydraulics, roller drive for automatic glass transport to the cutting table • 1 fully automatic float glass cutting table o Type: XYT 972, Serial No. E980016-2 o Can also be used for shaping, waste optimization, and PC Terra o Maximum dimensions 3300 x 2550 mm o Glass thicknesses 2-15 mm o With belt conveyor • 1 breaking table with breaker bars and air cushions o Serial No. E980016-4

Condition: good (used), Year of construction: 2009, In different assemblies, several parts. Interface Module Panel Manufacturer. SIEMENS S7 Typ: X1 Profibus-DP ET200S Iiedpogblhvofx Ahyjh Panel consist of the following pieces: 1 - X1 Profibus-DP ET200S 1 - IM 151-1Standard 6ES7-151-1AA04-0AB0 1 - PM-E 6ES7 138-4CA01-0AA0 4 - 4DI 6ES7 131-4BD01-0AA0 3 - 4DO 6ES7 132-4BD01-0AA0 1 - 1SI 6ES7 138-4DF01-0AB0

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15+30+45+90 U/min total power requirement 1,8/2,5 kW weight of the machine ca. 0,38 t Iijdpfx Asfgpdlehyeh dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Manual vertical circular saw for miter cuts from 60° left to 45° right.

Year of construction: 2011, condition: ready for operation (used), A complete Stürtz window production line is available. 1) Stürtz STBAZ-IPT-4000-V bar processing system for frames, sashes and mullions, year of manufacture: 2004. 2) Stürtz SE HSM-25/26-Compact-Plus four-head welding machine for sashes, year of manufacture: 2006. 3) Stürtz 4MC Motion Control CNC cleaning machine for the sash line, year of manufacture: 2011. 4) Stürtz WST-25-CNC turning station at the sash cleaner (3), year of manufacture: 2011. 5) Stürtz SE-HSM-40/26-Compact-Plus horizontal four-head welding machine for frames, year of manufacture: 2006. 6) Stürtz 2MC Motion Control CNC cleaning machine in the frame line, year of manufacture: 2008. 7) Stürtz WST-30 turning station in the frame line, year of manufacture: 2008. 8) Stürtz SE-BHT-3000 brush lifting table as a stop and transport table before the sash stop, year of manufacture: 2008. 9) Stürtz FBS-1 sash hardware screwing machine in continuous operation, year of manufacture: 2008. 10) Stürtz SE-VW-FT distribution and stacking trolley in the sash buffer system, year of manufacture: 2008. This is a complete production line for window construction. Documentation available. An on-site inspection is possible. Iisdpszcyqmefx Ahyoh

Year of construction: 2008, condition: ready for operation (used), A vertical washing and drying system for flat glass is offered: 3 cleaning zones, 6 roller brushes, drying zone (warm air), warm water treatment (heating tank), quartz sand filter, recirculation system, suitable for: float glass, laminated glass, load capacity: 150kg/m², glass thickness: up to 15mm, working height: approx. 2000mm. Inspection possible by arrangement. Iijdpfxox Hff So Ahyeh

Year of construction: 2001, condition: used, • Heating plate size (mm): approx. 1500 x 2700 • Usable area max. (mm): 1250 x 2450 • Loading side (mm): 1500 Ijdpfokt N Huox Ahysih

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, - loading table for jumbo sizes 6000 x 3210 mm with integrated transport belts - laminated glass cutting module with cutting length : 4600 mm 4 unloading arms new heating element from december 2025 min. glass thikness : 3 + 3 mm + PVB max.glass thikness: 8 + 8 mm + PVB Iodpeyh T Ruefx Ahyjih Knife separation : After automatic cutting and separation the PVB is cut by a blade giving a clean edge without any residue PC control system windows PC " View Plus " including flat screen monitor with cutting pattern display and optimisation import Lay out attached in photos

Condition: new, Year of construction: 2026, CORMAK Z5020 Vario 230V Column Drill Press Iiedpfx Aswnca Aohyeh The CORMAK Z5020 Vario 230V column drill press is a modern metal drilling machine designed for professional workshop and industrial applications. Thanks to its stepless speed adjustment, wide machining capabilities, and rigid construction, it is perfectly suited for demanding drilling operations. Main advantages of the machine Stepless spindle speed adjustment from 180–2000 rpm – allows precise adaptation of drilling parameters to the type of material being processed. Solid 80 mm diameter column – high rigidity ensures stability during drilling operations. Tilting worktable from -45° to +45° – increases flexibility when machining workpieces at an angle. Drilling depth stop with scale – ensures repeatable and accurate hole depths. Built-in LED lamp – improves visibility of the working area. T-slots in the table and base – enable secure mounting of machine vices and fixtures. Construction and technology The CORMAK Z5020 Vario column drill press is manufactured using durable cast iron components, significantly increasing its service life and resistance to vibrations. The spindle with an MK3 taper and 150 mm stroke enables deep-hole drilling. The belt-driven transmission ensures reliable and quiet operation. The adjustable worktable, together with 600 mm height adjustment range, allows machining of workpieces with various dimensions. Precision and work efficiency The 1100 W motor (230 V / 50 Hz) combined with stepless spindle speed control enables efficient machining of a wide range of metal materials. Precise feed control and ergonomic operation ensure operator comfort even during extended working periods. With a maximum drilling capacity of 25 mm, the machine is a highly versatile solution for many applications. Applications The Z5020 Vario 230V metal column drill press is ideal for: locksmith workshops, manufacturing plants, maintenance departments, technical schools and training centers. Standard equipment LED work light Drilling depth stop Tilting worktable with T-slots Base with T-slots Stepless spindle speed adjustment Technical specifications Parameter Value Maximum drilling diameter 25 mm Maximum chuck capacity 16 mm Spindle axis to column distance 215 mm Spindle taper MK3 Spindle stroke 150 mm Column diameter 80 mm Motor 230 V / 50 Hz / 1100 W Gear transmission Yes Base dimensions 580 × 415 mm Table dimensions 356 × 356 mm Overall height 1710 mm Spindle speed range 180–2000 rpm Table height adjustment range 600 mm Transport dimensions 1510 × 690 × 256 mm Weight 95 kg

Condition: not inspected (used), Year of construction: 1995, functionality: fully functional, Lisec sealing robot for second seal type VL-1/25-2, for maximum unit size 3500 x 2500 mm, running direction right to left, consisting of following: RTV-11/25VE, inlet conveyor with width measuring device for glass and frame thickness VL-1/25-2, sealing robot for double glazing units DOS-1TH, 2k metering station for Thiokol The machine will be completed and tested in simulation mode prior delivery Ijdpfsrrvkbex Ahyoih