Post bins

SCHÄFER

Condition: good (used), Technical Data of the Pallet Racking System: Racking system: SSI Schäfer Type: PR 600 Technical Data – Installation: Number of racking rows: 01 unit Length per racking row: 17,040 mm Number of bays per row: 06 units Number of levels plus ground level: 06 units Technical Data – Capacity: Pallet spaces per bay: 21 units Pallet spaces per racking row: 126 units Total pallet spaces: 126 units Max. bay load: 19,000 kg Lowest clear shelf height: 1,080 | 880 mm Assumptions: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 1,055 kg Scope of supply: 07x pallet rack frames, used Material finish: sendzimir galvanized Frame type: P215 Profile dimensions: 120 x 100 x 2.5 mm Including horizontal and diagonal braces, and base plates The frames are pre-assembled (bolted lattice) Height: 14,100 mm Depth: 1,050 mm 72x pallet rack beams, used Material finish: RAL 4002 red violet Box profile: 120 x 50 mm Beam type: TRV1-270-125-30 CE Clear span: 2,700 mm Connector: 5 HK (hooks) Maximum load per pair of beams: 3,165 kg, with uniformly distributed load Note: The functionality of the beams is fully ensured in spite of holes. SSI project with heat baffles mounted as per manufacturer's specifications! 144x safety pins, used Material finish: sendzimir galvanized For securing beams against inadvertent lifting 28x wedge anchors, new Manufacturer: Hilti Model: HST2 V3 M12x105 5-25 Design: carbon steel, galvanized Approved for: cracked concrete 14x shims, used Finish: fully galvanized For leveling the rack frames when installing on uneven surfaces Hedpfx Aeyfg Hmedajh 01x load capacity sign with field and shelf load details, manufacturer and job number dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Delivery or shipment is possible at extra cost, which can be quoted separately depending on the delivery location and the scope of delivery.

Condition: new, Working width 3500 mm Working height 2300 mm Number of cylinders 4 St. Hsdpfod Rzc Rox Adajh

Condition: good (used), Technical data for pallet racking upright: Racking system: SSI Schäfer Type: PR 600 Included in delivery: 01x pallet racking upright, used Material finish: Sendzimir galvanized Upright type: P175 Profile dimensions: 100 x 75 x 2.50 mm Incl. horizontal and diagonal bracing, and base plates The uprights are pre-assembled (bolted truss construction) Height: 7,100 mm Depth: 1,100 mm Hsdpfx Adjydh Ipsash Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipping of this item is subject to extra costs, which can be provided upon request depending on the place of delivery and scope of delivery.

Condition: good (used), Technical data for pallet rack upright: Racking system: SSI Schäfer Hodeydc Rxjpfx Adaoh Type: PR 600 Included in delivery: 01x pallet rack upright, used Material colour: Sendzimir galvanized Upright type: P175 Profile dimensions: 100 x 75 x 2.50 mm Incl. horizontal and diagonal braces and base plates The uprights are pre-assembled (bolted truss structure) Height: 7,400 mm Depth: 1,100 mm Your contacts in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the item: This item is offered for collection only. Any additional shipping or transport costs will be charged separately, and can be provided upon request depending on the delivery location and scope.

Condition: new, Year of construction: 2025, functionality: fully functional, saw blade diameter: 700 mm, cutting height (max.): 250 mm, working height: 850 mm, power: 7.5 kW (10.20 HP), We sell 1 x JRIMAC crosscut saw UKS 1.000 Cross cuts: 60x940 - 140x820mm - 180x720 - 220x520 - 240x340 Max. cutting height: 260mm Saw blade: 700mm Working height: 850mm Bottom and top extraction sockets: 160mm Hedpfxerfudrs Adajh - Infinitely adjustable, pneumatic cutting feed - hydraul. Brake cylinder for even lifting speed - Pneumatically controlled workpiece clamping device - cutting release via 2-hand control, with safety shield - Roller conveyors and stop systems on request

Condition: good (used), Technical Data for the Pallet Racking System: Racking System: SSI Schäfer Type: PR 600 Technical Data for Installation: Number of rack rows: 01 pc Length per rack row: 22,440 mm Number of bays per rack row: 06 pcs Number of levels incl. ground level: 06 pcs Technical Data for Capacity: Pallet spaces per bay: 28 pcs Pallet spaces per rack row: 168 pcs Total pallet spaces: 168 pcs Assumptions: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Max. pallet weight: 900 kg Max. bay load: 19,000 kg Lowest clear storage height: 1,080 | 880 mm Scope of delivery includes: 07x Pallet rack frames, used Material finish: Sendzimir galvanized Frame type: P215 Profile dim.: 120 x 100 x 2.5 mm Including horizontal and diagonal braces, and base plates Frames are pre-assembled (bolted construction) Height: 14,100 mm Depth: 1,050 mm 72x Pallet rack beams, used Material finish: RAL 5010 gentian blue INP profile: 120 x 58 mm Beam type: TRV1-360-12-l Connector: 4 hooks Clear width: approx. 3,600 mm Max. load per pair of beams: 3,600 kg, with evenly distributed load 144x Locking pins, used Material finish: Sendzimir galvanized For securing the beams against unintentional removal 28x Bolt anchors, new Hedpfxeyc S Tao Adaeh Manufacturer: Hilti Model: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 14x Levelling plates, used Design: fully galvanized For leveling rack frames that are set up on uneven floors 01x Load sign with specifications for bay and compartment loads, manufacturer, and commissioning number Dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for collection only. Transportation or shipping of this item is subject to additional costs, which can be quoted separately depending on the delivery location and order volume.

Year of construction: 1980, condition: good (used), with initial rounding Technische Daten:/ technical details Biegelänge / bending lenght 2000 mm max. Blechstärke / max. sheet thickness 20 mm Anbiegeleistung / initial rounding 15/11 mm Walzendurchmesser Unterwalzen / roll diameter below rolls 280 mm Oberwalzendurchmesser / diameter of the upper roll 300 mm Antriebsleistung Hauptantrieb / drive capacity main drive 16,2 kW Antriebsleistung Anstellantrieb Oberwalze / drive capacity upper roll 4,8 kW Antriebsleistung Anstellsntrien Unterwalze / drive capacity below roll 3,7 kW Gewicht ca. / weight ca. 14200 kg Hedpfjkzg E Aox Adash Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Working width 4000 mm Working height 2600 mm Number of cylinders 6 St. Dimensions (L/W/H) 5300 x 1250 x 3330 mm S&S frame press type RP 2000, ----- C E - version Stable frame welded construction made of thick-walled special hollow profiles, Sliding carriage and pressure bar with 50 mm hole pattern. Continuous abutment on the left for width compression, lower abutment in two levels. Vertical press cylinder on special pressure bar with one-hand quick adjustment with weight compensation in the 50 mm hole pattern, height-adjustable, long Sliding carriages ensure the permanent absorption of high pressing forces. Fast, smooth width adjustment with ball-bearing carriage Central locking, fixation in 50 mm hole pattern. Hedpfx Asu Uvaledaoh Upper horizontal press cylinder infinitely adjustable in height and with Equipped with counterbalance. Lower horizontal press cylinder with center holes for the two Abutment levels, with weight compensation. Abutment and pressure plate depth 100 mm Printing plate and support width 130 mm Machine electro-hydraulically controlled, with 2 vertical pressure cylinders d = 50 mm, stroke 120 mm double-acting, with counterweight and One-hand quick adjustment, 2 pieces Horizontal pressure cylinders d = 40 mm, stroke 120 mm double-acting, with weight balancing; 2 manual control valves, Pressure gauge, 1 pressure control valve from 20 to 125 bar corresponds to 400 to 2400 kg pressure vertical, with 3 kW three-phase motor for 400 volts, 50 Hz operating voltage. Complete with electrical connection. Paint finish: RAL 7035 light gray with RAL 7016 anthracite grey Working size: 4000mm x 2600mm (length x height) Required space: 5300 x 1250 x 3330 mm (L x W x H) Machine including the following options: ----- Article .00 pc Medium pressure bar with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve up to 2600 mm high Article .00 pc Individual pressure control for medium pressure bar, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article .00 pc Cross printing device complete with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve There is no weight compensation on the lower horizontal cylinder Article .00 pc Individual pressure control for transverse pressure device, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article .00 pc Shut-off valve on the 3rd vertical cylinder Article .00 pc Shut-off valve on the upper horizontal cylinder Article .00 pc Width allowance for compression of small frames to bridge the 1st pressure beam, including shut-off valve on the 1st vertical cylinder Article .00 pc Basic equipment for counter profiles The space required in height increases by 100 mm Item All pressure plates and abutments covered with plastic Article .00 pc Triangle studio window pressing device consisting of: locking device of Vertical pressure bar and 3 attachable, side-guided pendulum pressure plates Article .00 pc double pendulum pressure plate for pointed windows (triangle) ----- Total price in the above version ex works: On request! ----- Options: Article ....

Condition: good (used), Technical data for pallet rack upright: Racking system: SSI Schäfer Type: PR 600 Scope of delivery includes: 01x pallet rack upright, used Material color: sendzimir galvanized Upright type: P215 Profile dimensions: 120 x 100 x 2.50 mm Incl. cross and diagonal braces, upright protectors and base plates Uprights are pre-assembled (bolted truss construction) Height: 14,100 mm Hsdpfsycgd Hjx Adash Depth: 1,050 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Should you require transport or shipping for this item, additional costs will be incurred, which can be requested from us depending on the place of delivery and scope of delivery.

Condition: good (used), Year of construction: 2007, functionality: fully functional, power: 7.63 kW (10.37 HP), total width: 2,300 mm, total length: 4,000 mm, total height: 3,000 mm, type of input current: three-phase, pressure: 6 bar, input voltage: 400 V, nominal heat output: 950 kW (1,291.64 HP), operating pressure: 6 bar, Equipment: hot water, type plate available, The Pyrtec boiler system is an underfeed stoker combustion unit with internal grate and burnout grate for universal application, and is suitable for a particularly wide fuel spectrum, ranging from dry wood waste to wet forest wood chips. Maximum water content w= 50%, corresponding to a wood moisture u of 100%. The complete boiler system is type-approved (Approval No.: 02-221-512) with continuous quality control by TÜV and consists of the following components: FEED AUGER WITH BACK-BURN BARRIER LAYER: The feed auger transports the fuel into the combustion chamber and the grate area of the fireblock. The robust auger flights are made from heat-resistant chromium steel in the combustion chamber area. The feed tube is equipped with mounts for the back-burn thermostat and the thermal extinguishing valve. Above the auger is a dosing container with a photoelectric sensor for level control of the fuel barrier layer required by TRD 414. The drive is provided by a maintenance-free helical gear motor and chain drive enclosed in a dust-tight chain guard. Accessoires: Extinguishing valve with dirt strainer COMBUSTION BLOCK: Hsdpfexwhw Asx Adash Solid combustion block with multiple layers of insulation and high-quality chamotte lining. The feed and grate area consists of the fire chamber, gasification grate, and descending burnout grate. All of these components are made of highly heat-resistant cast steel (Material No. 1.4868), at least 12 mm thick and individually replaceable. This type of primary combustion system has proven to be extremely effective even with challenging fuels (wet sawmill residues, high bark content, etc.). Ash and foreign substances falling through the grates can easily be removed from outside through access holes sealed with covers. The horizontal combustion chamber is optimally shaped for complete burnout and also provides a large ash compartment. The combustion chamber door is heavy-duty, well-insulated, and can be ideally swung aside on a robust double-joint hinge for maintenance purposes. BOILER: Horizontal hot water boiler in three-pass design, mounted on the fireblock, insulated and stylishly clad. The insulated boiler front door is designed to allow the installation of an oil or gas burner. Operating temperature: max. 120 °C Operating pressure: 3.0 bar Test pressure: 6.0 bar FLUE GAS DUST COLLECTOR PYRTEC-140 to PYRTEC-650: Constructed in axial cyclone design, fully insulated and mounted to the boiler. Equipped with two insulated cleaning covers, an ash container with quick-release fastener, and mounting flange for the flue gas fan. FLUE GAS DUST COLLECTOR PYRTEC-1000: Constructed in axial cyclone design, fully insulated, free-standing for optimal placement. Includes two insulated cleaning covers, mounting flange for the flue gas fan, and connection for the ash container. FLUE GAS FAN: Specially designed fan for wood combustion operation, very quiet, with a heavy-duty, heat-resistant motor and flexible heat-dissipating hub. The fan housing can be continuously rotated at the intake, with a round exhaust outlet.

Condition: new, Year of construction: 2024, Laser source: 12 kW Raycus/IPG Laser head: Precitec Pro-Cutter 2.0 Control system: FSCUT 8000 Effective working area: 1520x3050 mm Max. Positioning speed: 120 m/min Max. Acceleration: 1,5 m/s² Hsdpsi Ar Rujfx Adajh Positioning accuracy: 0,02 mm/m Repeatability: 0.03 mm/m Max. Table load: 1500 kg

Year of construction: 2008, condition: ready for operation (used), 1 Bolenz und Schäfer BSD FWA 1/3/2 filament winding machine, year 2008, max. working length approx. 12 m, equipped with Siemens Sinumerik control system, 2 unwinding stands on rail system, Graco Pultex FRP metering pump and platform, approx. 12x6 linear meters. To be auctioned in our sale on 19.2.2026. Use the Clickout function for the auction. Hodeyb R Rbepfx Adash

Condition: used, This depth support (depth bar) for pallet racks from SSI Schäfer is the ideal addition for safe and stable storage. It is optimally suited as a support element for racks with a rack depth of 1,050 mm – perfect for daily use in trade, industry, and logistics. Used units available from stock – quickly deliverable and attractively priced. Product details: - Item: Depth support / depth bar - Racking system: SSI Schäfer pallet rack - Suitable for rack depth: 1,050 mm - Requirement: Max. crossbeam width 6 cm - Condition: Used - Price: €7.00 net per piece - Availability: ex stock Scope of delivery: - 1 x depth bar / depth support (for rack depth 1,050 mm) per piece Price: €2,440.00 net €2,903.60 gross You will receive an invoice with VAT shown separately. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery within Germany via our partner forwarding company – freight costs depend on postcode - Professional assembly and disassembly by trained teams available as an option - Rack inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will gladly provide you with a non-binding quotation – individually tailored to your requirements. Whether new construction, conversion, or expansion – we offer expert advice on your racking configuration. SHOWROOM: Visit us in our showroom! On site, you can get a comprehensive impression of our pallet racks, storage racks, and other solutions. Many systems are assembled and available for direct viewing. Our specialists are happy to answer your questions and provide personalized advice – we look forward to your visit! Haven’t found the right solution yet? Hedpfx Aeydv Azedash Visit our website for a quick overview of many offers and variations of the articles! INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone call. You’ll find our phone number on our company page. ☎️ We are available by phone Monday to Friday, 8:00 am – 4:00 pm. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Condition: new, Year of construction: 2025, TTMC WELDING MANIPULATOR TYPE WP500 - Capacity horizontal 500 kg - Capacity vertical 250 kg - Table dimension 560 mm Hjdsgg Rb Topfx Adash - Door stop 170 mm - Electric tiltable - Foot pedal - Documentation - 230V CALL FOR MORE INFO DUTCHMACH Metalworking machines ENSCHEDE

Condition: excellent (used), Technical data for the locking bracket: Manufacturer: SSI Schäfer Scope of delivery includes: 01x Locking bracket, used Material color: Sendzimir galvanized Leg "A": approx. 35 mm Leg "B": approx. 53 mm (support surface, see description) Incl. spacer block (grey) Internal dimension "C": approx. 22 mm Hsdpfx Adspgndgoaoh Material thickness: approx. 2.00 mm Weight per piece: approx. 0.120 kg Note: Thanks to the included spacer block, the Z-bracket can be used for various beam widths from 40 to 60 mm! Quick overview / Application area: - Without block for beam width 60 mm (e.g., for INP) - With block (small side inside) for beam width: 50 mm (INP or box profile) - With block (large side inside) for beam width: 40 mm (INP or box profile) General information about the item: This item is available for pickup only. Additional shipping or transport services are subject to extra charges, which can be provided upon request depending on the delivery location and quantity.