2000 Saom T55

Saom T55

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Nodpfx Afovvkd Toaowf Storage location: Nattheim

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 107.44.00.407, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece weight (max.): 500 kg, total height: 3,200 mm, total width: 3,200 mm, table width: 600 mm, table height: 2,400 mm, table length: 600 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 20,000 rpm, overall weight: 10,000 kg, spindle speed (max.): 20,000 rpm, spindle motor power: 15,000 W, number of spindles: 1, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The MIKRON UCP 800 Duro, manufactured in 2018, is a high-performance 5-axis machining center equipped with a Heidenhain iTNC 530 control system. The machine offers travel paths of 800 x 650 x 500 mm (X/Y/Z) and features a C-axis with an endless 360° swivel range. The installed spindle/adapter types are NCD 150 PL and NCD 200 PL with HSK-E63 interface. Nwsdox D Ux Tjpfx Afajf The illustrated table system is currently not mounted. The machine comes equipped with a chip conveyor, a coolant system with filter, as well as complete documentation. The machine is available free loaded on truck (FCA) and has seen very little use overall. The operating hours clearly indicate: Control ON: 30,064 h Machine ON: 10,322 h Program Execution: 4,159 h Drives ON: 7,331 h Spindle ON: 4,231 h The machine is under power and can be demonstrated at any time.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 5,477 h, spindle speed (max.): 3,500 rpm, total height: 1,863 mm, overall weight: 6,000 kg, controller manufacturer: FANUC, controller model: I series, number of axes: 3, This 3-axis DOOSAN Puma 2600M was manufactured in 2011. A robust horizontal turning machine featuring a Fanuc I Series control system, it offers a maximum turning diameter of 376 mm and a length of 760 mm. Spindle speed reaches up to 3,500 rpm. Includes chip conveyor, tool holders, and driven tools. If you are looking to get high-quality turning capabilities consider the DOOSAN Puma 2600M machine we have for tact us for more information. Additional equipment • Tool holders • 2+2 driven tools • Automatic tool measurement • Oil catcher • Oil mist filter (Losma) Machine Benefits Technical Machine Benefits Nwedpfx Afox D N Naeaef • Maximum turning diameter: 376 mm • Maximum turning length: 760 mm • Maximum spindle speed: 3500 rpm Extra Information Machine still under power Dimensions Machine Depth 4600 mm

Condition: used, Year of construction: 2004, Sato cutting machine for sale Nwodovx N I Nepfx Afasf

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 655 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Fanuc, controller model: Fanuc 0i-MD, workpiece length (max.): 400 mm, workpiece width (max.): 355 mm, workpiece weight (max.): 250 kg, total height: 3,120 mm, total length: 2,995 mm, total width: 2,975 mm, rotary table diameter: 350 mm, spindle speed (min.): 80 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 15 bar, spindle motor power: 15 W, spindle nose: ISO 40, number of slots in tool magazine: 40, tool length: 270 mm, tool diameter: 80 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED ​​5-axis vertical machining center with FANUC 0i-MD CNC Nwsdjx N Tm Njpfx Afajf

Year of construction: 2010, condition: excellent (used), - Production per hour : 4 panels - Daily production on 8 hours shift : 32 -Year production on 250 days: 7040 -Efficiency: 1MWp/year -Required Power: 40kW - Electric Feeding : V 380/3 + N +T 50 Hz -Water Consumption : 210 litres / our (0 litres with refrigeration) -Air consumption: 7000 liters / hour Final Product A) Standard 36 square cells 103 x 103 mm (4”) Panel with typical dimensions: 990 x 450 mm Power per cell: 1,5 Wp Cells per panel: 36 Year Production per shift : 380.160 Wp Panels per year: 7040 B) Standard 72 square cells 103 x 103 mm (4”) Panel with typical dimensions : 1300 x 660 mm Power per cell : 1,4 Wp Cells per panel : 72 Year Production per shift : 760.320 Wp Panels per year: 7040 C) Standard 36 square cells 125 x 125 mm (5”) Panel with typical dimensions : 1200 x 540 mm Power per cell : 2,5 Wp Cells per panel : 36 Njdpouhwmgofx Afaowf Year Production per shift : 633.600 Wp Panels per year : 7040 D) Standard 72 square cells 125 x 125 mm (5”) Panel with typical dimensions : 1600 x 800 mm Power per cell : 2,5 Wp Cells per panel: 72 Year Production per shift : 1.267.200 Wp Panels per year: 7040 E) Standard 36 square cells 156 x 156 mm (6”) Panel with typical dimensions : 1450 x 650 mm Power per cell : 3,5 Wp Cells per panel : 36 Stran 4 od 7 Year Production per shift : 887.040 Wp Panels per year : 7040 F) Standard 72 square cells 156 x 156 mm (6”) Panels with typical dimensions : 1950 x 980 mm Power per cell : 3,5 Wp Cells per panel : 72 Year Production per shift : 1.774.080 Wp

Condition: good (used), Year of construction: 2007, Turning Length 3.500 mm Turning diameter 720 mm Some technical details are shown on photos. Machine is located in Germany. Nwodex Hvvuepfx Afaof

Year of construction: 2004, condition: excellent (used), Swiss type lathes MANURHIN K'MX overhauled with : – Spindle, counter spindle, geometry and changes of all non-conforming parts. Rotating tool on: rear comb, front comb, end unit, radial and axial counter operation C-axis on: main spindle and counter spindle Nodpfeir Id Ujx Afajwf Rigid tapping on: main spindle and backworking spindle High-pressure Predispo Year of construction 2004 – approx. 22 000 h

Condition: good (used), Felder saw in nice condition. Has only had occasional use so in nice condition. Nodpfx Ajrubg Hsfaswf

Condition: ready for operation (used), CNC lathe by CMZ, model TX66 Y2 Quattro, year 2012, equipped with driven tooling on both turrets, Y-axis... Njdpoyk D Huefx Afaowf