Wide belt sander 2 units

SAFO 630

Condition: new, DESCRIPTION DM100 Z2C - performs edge rounding and removes sharp burrs from both the inner and outer edges of steel, stainless steel or aluminium parts after laser, shear or punch cutting of metal parts from 50 x 50 mm up to 1100 x 100 mm in size. Ekdjtxp The 1st station processes the products through a contact roller (approx. 55° shore) with an abrasive belt and removes strong burrs in the first step. The 2nd station processes the products with 2 counter-rotating cross belts each from below and from above. The cross belts round off the parts to be machined on both the inner and outer edges. A big advantage is also the deburring of products with surface protection foil, because only the edges are processed without damaging the foil. Technical data - DM1100 Z2C: Cgsdpfx Aked Ixadecet Working capacity (Ø mm) 1100x100 No. of belt stations (Z) 1 No. of cross belt stations 2 Abrasive belt, dimensions (mm) 1100x2200 Abrasive belt speed (m/s) 8-22 Cross belt speed (m/s) 2-8 Feed speed (m/s) 0.6-3.2 Sanding belt motor per head (kW) 18.5 Cross belt motor (kW) (2x) 3 Feed motor (kW) (3x) 0.18 Total power (kW) 33 Power consumption (A) 62 Rod suction connection per head (Ø mm) 150+185 Dimensions (mm) 3600x2330x2350 Weight (kg) 5000

Condition: good (used), Injection molding machine Engel Victory 310-60 Electric CC200 Year of manufacture: 2006 Clamping unit type: Fully hydraulic Clamping type: Columnless Clamping force: 600 kN Plate dimensions (table dimensions): 720 mm Distance between columns: 450 mm Mold height: 600 mm Opening stroke: 900 mm Ejector stroke: 115 mm Ejector force: 125 mm Moving plate centering (D): 125 mm Fixed plate centering (D): 4,70 m Threaded holes on plates: 5700 kg Maximum mold weight: 1,40 m Dimensions (W x H): 2,70 m Machine weight: 5700 KG Heating channels: 9 Nozzle clamping force: 160 mm Nozzle stroke: 360 1/min Pump drive power: 13 kW Heating capacity: 9 kW Standard voltage: 400 V 50 Hz Oil capacity: 185 l Auger diameter: 35 mm Injection volume: 154 cm³ Injection pressure: 2400 bar Screw pitch: 24 mm Cgodpforg Hh Nsx Akcot Screw speed: 155 cm³/sec. Plasticization capacity: 40.6 Air injection speed: 290 Additional equipment: Monitor text in German CEE 16A plug socket CEE 16A plug socket Hydraulic core 2x Air fan 1x Water-cooled machine battery Machine without material tank Leveling elements Standard interface/Euromap 12 Schuko 10A plug socket Schuko 10A plug socket

Condition: new, Year of construction: 2024, SJET Series, multi-purpose industrial part washers which are very easy to operate. Rotary table washer. Rotary table parts washer. Perfect parts washing systems for degreasing and maintenance purpose cleaning. Operating Principle : After the basket is loaded to the machine hot water mixed with cleaning detergent is sprayed to the rotating basket. Specially mounted stainless stell nozzles and rotational movement of the basket provides perfect cleaning for all parts inside the basket. Water is filtered before returning to the tank which provides extended lifetime for detergent and minimise cost. SJET series reduces consumption of water and detergent and help you protect the environment SJETs are manufactured using AISI 304 stainless steel. Different basket dimensions and capacities are available. Rinsing and drying options are available. Different lid types are available. Rotary basket washer Please feel free to contact for other details and options. Csdpfsd I Aw Eex Akcsgt

Condition: excellent (used), functionality: fully functional, Filter for extraction of dust and sawdust. Csdpfetzld Uox Akcogt

Condition: used, _____ Description: Year of manuf. : 2020 Control : Heidenhain TNC640 Speed : 42000 rpm Movement X/Y/Z : 650/550/400 mm Tool holder : HSK-E40 Spindle: Technology:Motorspindle Speed:42.000 rpm Power (max.):13,5 kW Taper:HSK-E40 Workingtable: Clampingsurface:530 x 900 mm Tableloading (max.):600 kg In general: Toolmagazine:60 Stations Rapid travers in X/Y/Z:50 m/min Equipment/Accessory: Positionsensor:Direct scales in X/Y/Z Cgjdpfx Ajwx T T Ujkcst Chipmanagement:Chiptray Coolingmanagement:Minimumlubrication Workpiecemeasurement:Touch probe, Renishaw OMP 400 Toolmeasurement:Laser, BLUM Setup operations:Electronic handwheel Further Equipment:Spindlechiller

Condition: used, machine/vehicle number: 008356, X axis working area: 3650 mm Y axis working area: 1560 mm Working Table: Flat table Main Electrospindle power: 13 KW Number of controlled axes: 4 axes Total number of drilling spindles: 18 Total number of tool changer positions: 26 Cgsdsx Swf Ispfx Akcjt

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 1,700 h, functionality: fully functional, machine/vehicle number: MP7/5/P, travel distance X-axis: 730 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, feed length X-axis: 585 mm, feed length Y-axis: 250 mm, feed length Z-axis: 400 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, spindle speed (min.): 1 rpm, spindle speed (max.): 42,000 rpm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, rapid traverse Z-axis: 80 m/min, type of input current: three-phase, table load: 60 kg, workpiece weight (max.): 60 kg, overall weight: 8,000 kg, MP7-5 Axis with integrated pallet changer 5-axis with rotary/swivel axis Travel range X/Y/Z 585x250x400 mm Travel range B +/- 105 degrees Travel range C continuous Workpiece weight 60 kg Distance machine table to spindle nose 450 mm Machine dimensions (W x D x H) 2845 x 2370 x 3000 mm Machine weight 8000 kg Spindle speed 42,000 rpm Equipment: Control: Heidenhain TNC640 Main spindle: HVC140 HSK-E40 with rotary union for internal media supply - Max. speed 42,000 rpm - Milling power S1/S6 10 kW / 13 kW - For internal coolant supply, air and emulsion Oil mist extraction for oil/emulsion Dust extraction: L-CUT Machine-integrated workpiece changer for 36x EROWA ITS50 or 18x EROWA ITS115 Hand-held control unit with electronic handwheel and enabling switch Measuring probe system: Renishaw OMP400 Aerosol DRY LUBRICATION (ADL) - Precise dosage of media externally and through the tool Rotary table chuck: EROWA PowerChuck P on 5-axis Blum laser: LC50 Media distributor: MHT Tool changer 90 positions, HSK E40 Warranty: 12 months Cjdjxlctbjpfx Akcjgt Transport Initial commissioning on site Training

Condition: used, machine/vehicle number: 008088, X axis working area: 3700 mm Y axis working area: 2100 mm Working Table: Flat table Cgsdpsx A Hbqefx Akcet Main Electrospindle power: 9 KW Number of controlled axes: 4 axes Total number of drilling spindles: 31 Total number of tool changer positions: 14

Condition: ready for operation (used), Year of construction: 2005, Offered is a Röders RXP 500 high-precision milling machine year 2005, approx. 160763h, spindle approx. 100000h incl. HSK-25 high-frequency spindle with 50000rpm, 42-fold chain magazine, HG sensor, high-accuracy option incl. spindle cooling as well as Renishaw probe, machine weight approx. 5500kg. Viewing is possible by arrangement. Codpoxyk S Ijfx Akcegt

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: S4 1TT33 3250, total width: 4,340 mm, total height: 2,775 mm, total length: 5,145 mm, working width: 1,350 mm, workpiece height (max.): 16 mm, Viet S4 sanding and calibrating machine. Csdpfx Akeutdrhecsgt * 1st Longitudinal sanding unit T60 E IPP HP DU; Belts 1380x3250, Motorization by converter 15 KW * 2nd Transversal sanding unit T60 ET HP DUO , Belts 150x8700, Motorization by Converter 15KW * 3rd Transversal T60 AND HP DUO sanding unit, 150x8700 belts, powered by 15KW converter Variable speed belt 2-20 m/min suction unit.