Press brake

SafanDarley

Condition: like new (used), Year of construction: 2023, functionality: fully functional, pressing force: 100 t, operating speed: 75 mm/s, table height: 1,000 mm, throat depth: 1,000 mm, total length: 4,450 mm, total width: 1,820 mm, total height: 2,650 mm, overall weight: 7,900 kg, controller manufacturer: Lenze, working width: 3,060 mm, bending force (max.): 100 t, back gauge: 1,000 mm, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 1,000 mm, distance between stands: 3,200 mm, warranty duration: 6 months, control type: CNC control, number of support arms: 2, back gauge adjustment: CNC-controlled, number of axes: 6, actuation type: electric, Equipment: CE marking, documentation/manual, foot remote control, safety light barrier, SafanDarley edge bending machines are innovative and highly efficient sheet metal processing machines from the Dutch manufacturer. Their bending precision and reliability have been highly appreciated by users in Poland and worldwide. The SAFANDARLEY E-Brake edge bending machine features an electric drive. Lenze servomotors, controlled by frequency inverters from the same manufacturer, enable fast and reliable operation of the system for many operating hours. Additionally, the machine consumes electrical energy only during the downward movement of the slide. The slide returns to its original position using the force generated by springs. Even when the machine is idle, it practically does not consume electrical energy because the system does not have a pump, as is the case with hydraulic presses. We estimate that the electrical energy consumption is 70% lower than in conventional hydraulic presses. SAFANDARLEY servo-electric edge bending press, model E-Brake Press force: 1000 kN (100 tons) Slide stroke: 300 mm Opening: Q=590 mm Upper beam lowering speed: 75 mm/s Upper beam accuracy: +/- 0.01 mm Maximum speed of the back gauge fingers: 350 mm/s Maximum reach of the back gauge fingers (third point of support, reach in the X-axis): 1000 mm Back gauge range in the R-axis: 150 mm Connected power: 11 kW Weight: 7900 kg Machine width: 4550 mm Machine depth: 1820 mm Machine height: 2510 mm Bdedpfx Asr Ndxqjdrsd Power supply: 3/N/PE 50 Hz – 400/230 V Servo-electric drive (without a hydraulic system) Power transmission via belts CNC-controlled axes: Upper beam: CNC axes: Y1-Y2 Back gauge: CNC axes: X-R-Z1-Z2 Hydraulic upper clamp: WILA Machine inspection and testing are possible.

Condition: good (used), Year of construction: 2010, functionality: fully functional, operating hours: 15,996 h, input voltage: 400 V, overall weight: 6,750 kg, 1000 KN Max. stroke: 200 Weight: 6750 Noise level: 74 dB Year of manufacture: 07/2010 Voltage: 400 V / 50Hz Rated current: Current operating hours: 15,996 hours with manual angle measurement and correction system with safety laser UVV inspection on a regular basis / maintenance always carried out by Amada on a regular basis Bdsdpotwliwefx Adred Accessories: Tool die: 2 pieces UKB 20.478 V8/12 30° 835mm 3 pieces UKB 20.344 V4/V7 88° 835mm Tool holder: 4 pieces UKB substructure for double V die 20.287 + 60.919 835mm Bending swords: 5 pieces UKB 10.261 H100 R0.6/90° 2 pieces UKB 11.158 H80 R0.6/30° 2 pieces UKB 11.200 H66 R0.8/90° Other: Light barrier in need of repair (new price approx. €4500) – separately as a replacement as an attachment (has been renewed) The machine can be inspected under power in DE84051 Mettenbach by appointment. Sale only to commercial customers and with exclusion of any warranty!

Condition: excellent (used), Year of construction: 2017, Very well-maintained E Brake from SafanDarley. Type: E Brake B 100 3100 Capacity: 3100 x 100 tons Y1, Y2, X, X1, R, Z1, and Z2 CNC Bedpfx Adjzfphloredd Hydraulic Wila NS top clamp Includes a set of tools.

Condition: good (used), Year of construction: 2017, functionality: fully functional, power: 11 kW (14.96 HP), pressing force: 100 t, stroke length: 300 mm, operating speed: 10 mm/s, Equipment: CE marking, safety light barrier, Bending capacity: 100 Ton Bodpfxjzbvulo Adrjdd Bending length: 3100 mm Backgauge: 550 mm Stroke length: 300 mm Bending speed: 10 mm/sec Supplied with: - 2 support arms - Integrated safetyscreen - 6 axis controlled Y1, Y2, X, R, Z1, Z2 - Cabinet with many tools - User manuals Country of origin: Netherlands Motor power: 11 kW Machine (L×W×H): 400 x 230 x 290 cm Machine weight: 6350 kg

Year of construction: 2023, condition: new, ! Offers for customers from Baltic states only: Lithuania, Latvia, Estonia. Guillotine RAPIDO is fast reliable shearing machine. Depends on sheets length there are guillotines with different working lengths available: 1300 mm / 2600 mm / 3200 mm / 4100 mm. Machine can do up to 35 cuts per minute. The drive system with eccentrics, pulldown rods, and hold down system which can be positioned as close as 2.5 cm from the knives allow for easy and expedient trimming of narrow strips. RAPIDO guillotine shear is equipped with squaring arms on both sides and the LED cutting line light. Bjdoixz D Uopfx Adrjdd Available working lengths: 2600 mm / 3200 mm / 4100 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 1998, Darley hydraulic guillotine shear type GS 3116 working width 3050 mm max sheet thickness 16 mm Delem NC control type DAC 350 motorized backgauge automatic angle adjustment automatic cutting gap adjustment rear side equipped with transport conveyor Bdedpfxsxpuipe Adred

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, pressing force: 100 t, stroke length: 300 mm, operating speed: 75 mm/s, reverse speed: 75 mm/s, table length: 3,060 mm, table height: 930 mm, total length: 4,350 mm, total width: 1,820 mm, total height: 2,680 mm, overall weight: 7,500 kg, Equipment: CE marking, documentation/manual, safety light barrier, Unique opportunity for those seeking a top-of-the-line, immediately available CNC press brake. We offer a SafanDarley E-Brake 100-3100, 100% electric, a NEW machine installed in our showroom exclusively for technical demonstrations and customer presentations. The machine has never been used in production; the few operating hours are solely related to demonstration activities. Key features: • New machine from showroom • Never used in production • Ready for immediate delivery • High-efficiency electric technology • High bending accuracy and repeatability Bdodpfjzcmabox Adrsd • Reduced operating and maintenance costs compared to traditional hydraulic presses Machine configuration: • EC20 Touch graphic touchscreen control with 2D bending simulator and automatic bending sequence calculation • Motorized and independent Z1+Z2 axes • Extra back gauge Z0+Z3 • Wila upper table with hydraulic locking • Wila lower table with mechanical locking and a set of bars for using Schiavi-type dies • Mobile aluminum front supports • Integrated photocells • Clear opening 590 mm / stroke 300 mm • Interface for Industry 4.0 The machine is offered for sale exclusively due to the renovation of the exhibition area and the replacement of the model currently in the showroom.

Condition: excellent (used), Year of construction: 1997, pressure 170 t chamfer lenght 4080 mm distance between columns 3680 mm column arm 410 mm dayligth 385 mm stroke 215 mm ajustment speed 200 mm/sec working feed 1-10 mm/sec return speed 135 mm/sec table width 200 mm table height 1050 mm Number of working hours 25.430 h oil volume 350 l total power requirement 29 KVA weight of the machine ca. 16.450 kg. range L-W-H 4620 x 2210 x 2885 mm Machine in good condition Regularly serviced by the manufacturer CNC backgauge with 8 axes (!!) - in checked conditions - machinevideo - ?v=yEaRj0XJAC4 Equipment: - CNC electro-hydraulic press brake/die bending press - DELEM CNC control - swiveling front left * High-resolution graphic screen * Clear, concise menus in the operator's language Bsdoxcp Rbjpfx Adrjdd * Large tool and product library * Graphic 2D programming * Automatic bend sequence calculation and collision detection * Emergency stop button at front - CNC axis adjustment: * Y1 - Y2 - X1 - X2 - R1 - R2 - Z1 - Z2 axis + CNC crowning - X axis - adjustment speed: 500 mm/sec. * Max. stop range: 860 mm - R axis - Adjustment speed: 300 mm/sec. * Max. travel: 250 mm - Z axis - Adjustment speed: 1000 mm/sec. * Max. travel: 3260 mm - CNC electric motor table crowning - CNC electro-pneumatic die shift (I axis) - WILA / TRUMPF upper tool clamping - hydraulic - WILA / TRUMPF lower tool clamping - hydraulic - 2x front, robust support arms - movable - 1x freely movable 2-hand/foot control - 1x freely movable foot switch - Side safety device (swivel doors) - Rear safety device (sliding doors) - Original operating instructions

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 7771, functionality: fully functional, pressing force: 100 t, stroke length: 300 mm, operating speed: 75 mm/s, reverse speed: 75 mm/s, table height: 900 mm, throat depth: 1,000 mm, total width: 3,100 mm, overall weight: 8,900 kg, travel distance X-axis: 1,000 mm, controller model: EC20 - graficzne 2D, working width: 3,000 mm, bending force (max.): 100 t, back gauge: 1,000 mm, back gauge speed R-axis: 250 mm/s, back gauge travel distance R-axis: 200 mm, back gauge travel distance Z-axis: 1,000 mm, distance between stands: 3,000 mm, control type: CNC control, degree of automation: semi-automatic, back gauge adjustment: CNC-controlled, number of axes: 4, actuation type: electric, Equipment: CE marking, emergency stop, european tool clamping system, safety light barrier, Servo-electric press brake SAFANDARLEY type E-Brake 100-3100 NS (100T - 3060 mm) AMADA tooling system Manufacturer: Netherlands - Lochem We are the official representative of SafanDarley in Poland. - Servo-electric drive - Press force: 100 T - Bending length: 3060 mm - Stroke: 300 mm - CNC control in axes Y1 / Y2 / X / R / Z1 / Z2 - CNC-controlled backgauge with 4 axes - X / R / Z1 / Z2 Bdedpfsylt Uksx Adrod - 2D graphical control - EC20 model - Programmable light curtain - AMADA tooling system - WILA tooling system - lower clamp compatible with 4V / 2V / 1V / T-type dies, 60 mm base - Lower table crowning compensation

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, pressing force: 150 t, operating speed: 90 mm/s, reverse speed: 90 mm/s, table height: 1,000 mm, throat depth: 1,000 mm, total length: 4,500 mm, total width: 1,820 mm, total height: 2,850 mm, overall weight: 16,000 kg, travel distance X-axis: 1,000 mm, controller manufacturer: Lenze, controller model: 9300, working width: 3,060 mm, bending force (max.): 150 t, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 1,000 mm, distance between stands: 3,200 mm, warranty duration: 6 months, control type: CNC control, back gauge adjustment: motor-driven, number of axes: 7, actuation type: electric, Equipment: safety light barrier, Safan on the market: Safan H-Brake 150T – 3100 mm press brake. This machine is equipped with a conventional hydraulic drive, renowned for its exceptional lifespan and reliability. This is why these models are so popular on the used machinery market. The chromed pistons and the application of specially selected, high-quality piston seals ensure long-lasting performance of these components. In cooperation with Schneider Hydraulics, servo valves have been developed to provide precise control of the ram’s descent and return stroke. The machine is equipped with full CNC-controlled axes and Wila hydraulic clamps, allowing for a wide range of bending applications and easy retooling. Safan E-Brake 150-3100, year of manufacture: 2010 - Safan TS 1 controller - 2D bending system - 17'' color touchscreen monitor - Operator panel on a swiveling arm - CNC-controlled Y1/Y2 axes - CNC-controlled X-axis Bodjxr Uq Sepfx Adrjdd - CNC-controlled R-axis - CNC-controlled Z1+Z2 axes - CNC-controlled delta X axis - Wila® upper tool adapter (mechanical clamping), hardened - Wila® lower tool table - Lightguard safety with upper beam descent control option - Work area illumination at the front and rear of the machine - Electrical installation: 3/N/PE, 50 Hz, 400/230 V - Opening: 690 mm - Table length: 3060 mm - Distance between machine frames: 3300 mm

Condition: used, Year of construction: 2013, functionality: fully functional, type of input current: three-phase, sheet thickness steel (max.): 3 mm, overall weight: 15,000 kg, input voltage: 400 V, bending angle (max.): 180 °, working length: 3,200 mm, working range: 3,200 mm, Equipment: documentation/manual, safety light barrier, Technical features: Year 2013 Working length 3200 mm Maximum sheet thickness (iron 400 N/mm2) 3.00 mm Bodewq Rumspfx Adrsdd Maximum sheet thickness (stainless steel) 2.00 mm Maximum sheet thickness (aluminum) 4.00 mm Maximum bending height on four sides 250 mm Upper jaw stroke 650 mm

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, pressing force: 35 t, operating speed: 10 mm/s, table width: 60 mm, total height: 2,510 mm, overall weight: 3,250 kg, travel distance Y-axis: 590 mm, working width: 1,250 mm, back gauge speed R-axis: 150 mm/s, back gauge travel distance R-axis: 100 mm, back gauge travel distance Z-axis: 1,000 mm, height adjustment type: electric, rapid traverse Y-axis: 110 m/min, working length: 1,250 mm, Servo-electric press brake SAFANDARLEY type E-Brake Premium 35-1250 ES Manufacturer Netherlands - Lochem We are the official representative of SafanDarley in Poland. - Servo-electric drive - stroke 300 mm - CNC control in Y1 / Y2 / X / R axes - rear bumper in 2 CNC axes - X and R - 2D graphic control - model EC20 - light curtain - programmable - WILA tool system - upper clamp - WILA tool system - lower clamp possible dies 4V / 2V / 1V / type T with a base of 60 mm Machine in very good condition after technical inspection by the manufacturer. Max. pressure kN 350 Max. bending length mm 1,250 Max. construction height Q, standard (without tool adapter and table) mm 650 Max. press stroke mm 300 Upper beam positioning accuracy mm +/- 0.01 Max. correction for Y1 - Y2 programmable mm +/- 2.50 Max. Y-axis approach speed* mm/sec 180 Max. bending speed* mm/sec 10 Max. return speed mm/sec 180 X-axis positioning speed mm/sec 350 Max. range of stop movement - X axis mm 550 Max. range of stop movement (second stop point) - X axis mm 575 Max. range of stop movement (third stop point) - X axis mm 1,000 Repeatability of back stop positioning mm +/- 0.02 Max. range of movement of the stop - R axis mm 150 Repeatability of positioning R axis mm +/- 0.10 Speed of positioning R axis mm/sec 100 Weight kg 3,250 Bdodjv Eam Nopfx Adrjd Connected power kW 11 Machine length mm 2,230 Machine width mm 1,775 Machine height - transport dimension mm 2,510 Mains voltage 3/N/PE 50Hz – 400/230V Machine connected - ready for presentation at the headquarters in Warsaw. Immediate availability

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, machine/vehicle number: 11.2760, working width: 3,100 mm, sheet thickness (max.): 8 mm, back gauge: 1,000 mm, TECHNICAL DETAILS Control: CNC Max. working width: 3,100 mm Throat depth: 40 mm Max. sheet thickness: 8 mm Back gauge: 1,000 mm Motor power: 16.5 kW Bodpew Tzkvefx Adrsdd MACHINE DETAILS Transport dimensions: 3,400 mm x 2,300 mm x 2,100 mm (L x W x H) Transport weight: 8,000 kg Transport packages: 2 Documentation available: Yes CE marking present: Yes

Year of construction: 2011, condition: ready for operation (used), controller manufacturer: AMADA, overall weight: 4,700 kg, pressing force: 51 t, stroke length: 200 mm, number of axes: 8, This 8-axis AMADA HFE M2 5020 was manufactured in 2011. It features a hydraulic press brake with a maximum press force of 500 kN and a stroke up to 200 mm. Weighing 4,700 kg and operating at a noise level of 74 dB(A), it's CE certified and made in France. If you are looking to get high quality bending capabilities consider the AMADA HFE M2 5020 machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Axes specification: y1, y2 (beam control), x1, x2 (backgauge depth), r1, r2 (backgauge height), z1, z2 (backgauge finger positioning) • Noise level: 74 db(a) • Voltage/frequency: 400 / 415 v, 50 hz • Number of phases: 3 • Installed power: 6 kw • Nominal current: 16. 2 a • Ce certified Extra Information Bsdpfx Adox D H I Hsrodd Machine still under power