Vibratory sieve

Russell Finex 17300

Condition: excellent (used), We have two almost identical sieving stations on frames to sit over bins. Both new in 2014 and in lovely condition. Photos show the machines before washing. 550mm sieve diameter. Choice of mesh screens. Each machine will be supplied with one screen. Fodpjvpv Nujfx Alqopg

Condition: used, Technical details: measuring range X-axis: 3000 mm indexing: 0,1 mm weight: variable kg No. 1 Caliper/caliper gauge made of stainless and hardened steel Make INOX Measuring range 0 - 3000mm Reading 0.05mm via vernier Leg length approx. 280mm without measuring tips for internal measurement No. 2 Caliper/caliper gauge made of stainless and hardened steel Make Massi according to TGL Measuring range 2000mm Reading 0.1mm via vernier Fpsdpeu N Atwsfx Alqsg *

Condition: used, Technical details: diameter: 20 mm workpiece length: - mm total power requirement: 2,3 - 3,0 kW open-circuit voltage: 2,8 V frequency: 50/60 Hz power consumption: 3 kVA connection voltage: 230 V control voltage: 15 (Gleichstrom) V dimensions of the machine ca.: 1,0 m Fpjdpfx Asw Rkybjlqsg weight of the machine ca.: 30 Kg dimensions L x W x H: 395 x 275 x 255 mm The crack tester consists of a portable housing with control and display elements, as well as connection cables for magnetization and a power plug. Area of application The crack tester is designed for surface crack testing of weld seams, large forged and cast parts, machine components, but also as a power unit for stationary crack testing benches. Only ferromagnetic workpieces can be tested! During magnetization, the workpiece must be sprayed with a test fluid (test medium). Defects can then be detected under UV light (UV lamp). *

Year of construction: 2020, condition: as good as new (ex-display), Demo tool: SDT 200 ASD (ATEX) Ultrasonic Multifunction Detector Set. Composed of: Fedpfxspyg Sao Alqjpg 1 x SDT 200 (ATEX) receiver with digital display (numeric) for static peak value detection incl. battery block Monitoring indicators for reliable diagnostics in wear monitoring: RMS. PEAK and Crest factor, integrated data logger for 4000 measurements at 500 locations (grouped by sensor, date and time) 1 x Charger 1 x Peltor Headphones 130 dB 1 x Shoulder Strap 1 x Directional Probe (Screw Tip & Rubber Tip) 1 x plastic case with insert 1 x Instruction manual on USB stick 1 x USB cable for data transfer 1 x calibration certificate (as of 02/2020) 1 x Flexible sensor Atex 550 mm with replaceable sensor head 1 x Spiral Cable 1 x Funnel Directional Probe for SDT200 1 x leakage trailer 1000 pieces (to mark compressed air leaks) Other leakage meters on request. Visit our store. We always have a wide range of new and used compressors in stock!

Year of construction: 2019, condition: excellent (used), Russell Finex 17240 Vibratory sieve Fodpfxeyw Trbs Alqspg 2019, Stainless compact vibratory sieve, 500mm mesh diameter, mobile, 3Ph

Condition: used, Three-phase power meter, current, voltage and power measurement, long-term recording, energy metering 3-phase power measuring device, ammeter, voltmeter, digital multimeter, active power, apparent power, reactive power BEHA Type UNITEST Power Analyzer 93555 For measuring voltage, current, active power, apparent power, reactive power, power factor, phase angle, frequency measurement, rotation field detection, energy measurement, harmonic analysis Display: LC multifunction display with backlight Refresh rate: approx. 2 sec. Data logger: 512 kB non-volatile memory (max. 21,000 readings, max. 10 measurement series) Sampling rate: 5 s, 30 s, 1 min, 2 min (adjustable) Data transfer: via optically isolated RS232 interface Manual reading memory: max. 99 readings Overvoltage category: CAT III 600 V Power supply: 8 x 1.5 V batteries (AA) or plug-in power supply 230VAC / 12VDC (batteries not included) Voltage measurement: 3 input channels with common reference point "N" Measurement range: 0–600 V rms Display range: 0–999.9 V rms Resolution: 0.1 V Mains frequency: 50 Hz Current measurement: Input range I1, I2, I3: 3–999.9 A Input I4: 3–250 A Display range: 0–999.9 A Resolution: 0.1 A Fpjdpfsx A Imzsx Alqsg Clamp opening: 40 mm Active power: Option to display the active power of a single input or the total value Display range: 0–999.9 kW Resolution: 0.1 kW Apparent power: calculated from the RMS values of voltage and current Display range: 0–999.9 kVA Resolution: 0.1 kVA Frequency measurement: Range: 45–80 Hz Resolution: 0.1 Hz Accessories: - Carrying case - User manual - 4 current clamps - 4 measuring leads with crocodile clips - RS232 adapter cable - Plug-in power supply 230VAC / 12VDC Overall dimensions (W x H x D): 370 x 270 x 170 mm Total weight: kg Device tested, fully functional. The housings of 2 current clamps are damaged and the battery compartment is slightly oxidised, see pictures.

Condition: used, Thickness gauge, coating thickness gauge -Manufacturer: PCE, thickness gauge with case Fpedpfx Alsr H Nlwsqjg -Type: PCE-CT 27FN -Measuring range: 0 - 1250 µm -Accessories: see photos -Dimensions: 250/210/H55mm -Weight: 0.7 kg

Condition: used, Year of construction: 2013, machine/vehicle number: 2690/07, Mahr Perthometer PGK 120 Measuring range: 100 [x in mm] Max. load capacity: 10 kg with cross table Probe system: MFW-250 (measuring range: in z ±0.25 mm) Fsdpfxjy D Eads Alqopg Measuring principle: tactile-inductive Contact forces: 1–3 mN Probe: roughness probe (tip radius 2–5 µm, opening angle 60° and 90°)

Condition: good (used), Selling HKM 5000N/500KG Force Meter. Fedpfxovbwyls Alqepg

Condition: excellent (used), measuring range X-axis: 250 mm, measuring range Y-axis: 380 mm, OCS Alfa-SYS Sara-set 33 Swift tool setting machine in very good condition. Current inspection/test until May 2025. I am including three pieces of fonts with the machine. The machine includes a Dymo Label 450 printer and a mouse with a disc. I am including a book with the machine. Fpsdpfx Aov Am Emjlqsg