Romi GL 350B

Romi GL 350B

Condition: used, Control: FANUC 0i-TD YOM: 2014 B-axis Max: 830° X-axis Travel: 243 mm Y-axis Travel: 50 mm Z-axis Travel: 740 mm Chuck Dia 10” Max. Workpiece Diameter: 350 mm Spindle Speed: 4000 RPM Max. Bar passage: Ø 64 mm Tool turret: 12 positions Tool attachment: bmt-65 Sub Spindle chuck Dia 6” Sub spindle speed: 6–6000 rpm Bsdpfxszy Ique Afgjwu Spindle nose: a2-8 Sub spindle nose: a2-5 Complete with swarf conveyor Machine Depth: 2080 mm Machine Weight: 9600 kg

Condition: good (used), Year of construction: 2011, Ref. -No.: 10598 Manufacturer: HELLER Type: MC 2000 Year of construction: 2011 Type of control: CNC-Steuerung Control: Siemens 840 D sl Storage location: Halberstadt Country of origin: Hermany Machine-No.: 50XXXX X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 1000 mm Work spindle torque (25% ED): 242 Nm Tool Taper: SK 40 Numbers Of Tools In Magazin: 54 Tool Piece Magazine With: 80 Pcs./pcs. Turning Speeds: 10000 RPM Drive Capacity - Spindle Motor: 17 kW High-Pressure Pump: 50 bar Bedpfx Aox Hn D Rofgjwu Speed range - main spindle: 10000 RPM Numbers Of Pallets: 2 Size Of Pallet: 630 x 500 mm Weight Of The Machine Ca.: 13000 t spindle running time: 7000 H Operating hours: 14000 H Preparation area: 4 x 90° hydraulic pressure: 200 bar Further information: - The machine has been measured - The geometry is in excellent condition - The spindle runs a little rough - Clamping towers and cutting tool holders are also included - 2 additional clamping towers - 2 replacement pallets - 2-axis servo tool changer - Scraper conveyor for dry machining - Cold light in the work area - Central cooling unit for motor spindle and control cabinet - Control unit at the workpiece setup station - NC-controlled rotary table - Clamping hydraulics The machine can be viewed under power by appointment.

Condition: ready for operation (used), Year of construction: 2014, spindle speed (max.): 4,000 rpm, travel distance X-axis: 243 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 740 mm, overall weight: 9,600 kg, controller manufacturer: FANUC, controller model: 0i-TD, number of axes: 6, This 6-axis Romi GL 350B CNC Horizontal Turn-Mill Center was manufactured in 2014. It features a maximum workpiece diameter of 350 mm and a main spindle speed of 4,000 rpm. The machine is equipped with a counter spindle with a speed range of 6 – 6,000 rpm, driven tools, Y-axis capability, and a 12-position BMT-65 turret. The machine configuration includes controlled axes X, Y, Z, A, B and C, allowing complex turn-mill operations. If you are looking to achieve high-quality turning and milling capabilities, consider the Romi GL 350B machine we have for sale. Contact us for further details. Bwsdpsy E Nirofx Afgju • Axes: • Sub-spindle travel (B-axis): 830 mm • Capacity: • Max. workpiece diameter: 350 mm • Max. bar passage: Ø 64 mm • Main spindle: • Spindle nose: A2-8 • Counter spindle: • Included • Speed: 6–6,000 rpm • Spindle nose: A2-5 • Turret: • 12 positions • Tool attachment/interface: BMT-65 • Dimensions : • Machine depth: 2,080 mm Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 2012, swing diameter 560 mm turning length 800 mm control C200-4D Siemens 840 D spindle head 8 DIN 55026/55021 ISO 7027/1 Bedjx Emp Nspfx Afgowu bar capacity 90 mm spindle diameter in front bearing 140 mm turning speed range - spindle ~ 3.500 U/min drive capacity - spindle motor 100% / 40%: 43 / 57 kW Torque 275 / 363 Nm Indexing 2,5 ° C-Axis 0,001 ° Number of Turrets 1 number of toolpositions 12 pos. Spindle speed - driven tool stations ~ 6.000 min -1 power capacity - driven tool-stations 11 kW tool taper 40 x 63 mm DIN 69880 Torque 21,5 Nm travel -x axis 300 mm travel -z axis 800 mm rapid traverse X/Z: 30 / 22,5 m/min feed power X: 7.200 N feed power Z: 9.000 N dia. of quill 65 mm Cone SK 30 longitudinal travel 800 mm rapid traverse 10 m/min total power requirement 51 kVA weight of the machine ca. ca. 14 t dimensions of the machine ca. 7,3 x 4,0 x 2,6 m CNC Turning- and Milling Center INDEX - G 250 - Precision package for main or counter spindle - Selected spindle housing - Bearingless clamping cylinder - Precision balancing of work spindle, clamping cylinder, and collet clamping

Condition: excellent (used), Year of construction: 2007, CNC Control: MSX-501III X axis mm: 730 Y axis mm: 730 Z axis mm: 850 B axis mm: 0.001 Pallet size mm: 500 x 500 Number of pallets: 2 Table load capacity kg: 500 Cutting feed mm/min X, Y, Z: 50,000 Max. rapid traverse m/min X, Y, Z: 50, 50, 50 Spindle speed rpm: 14,000 Spindle power kW: 22/18.5 Taper type: BT-40 Torque Nm: - Bodpfx Afoythprsgowu Tool changer type: Chain Tool magazine positions: 60 Max. tool diameter mm: 70 Max. tool diameter with adjacent pockets empty: 140 Max. tool length mm: 500 Max. tool weight kg: 8 Coolant tank capacity l: 760 Through-spindle coolant bar: Yes Equipment Chip conveyor Internal coolant Rigid tapping Manuals, electrical diagrams, etc.

Condition: used, Year of construction: 2005, controller manufacturer: Fanuc, controller model: 21i-TB, _____ Description: Year of manuf. : 2005 Control : Fanuc 21i-TB Turning diam. : 730 mm Turning length : 750 mm In General: Year of manufacture:2005 Control system:Fanuc 21i-TB Max. speed:2,000 rpm Bwsdpfx Asz Am Scsfgju Turning diameter:730 mm Turning height:750 mm X-axis:390 mm Z-axis:780 mm Chuck diameter:600 mm Tool turret:8 stations Equipment: Chip removal:Chip conveyor Coolant supply:Coolant pump Tool measurement:Renishaw tool setter Chuck:SMW Autoblok 3-jaw chuck

Condition: excellent (used), Year of construction: 2007, Control: Siemens 840D powerline Travel paths X/Y/Z: 630/630/630 mm 2-fold pallet changer Bsdpfx Ajzb R I Tofgewu Spindle speed: 10,000 rpm Knoll coolant system with paper band filter Tool holder: SK40 Tool magazine with 80 stations

Condition: excellent (used), Year of construction: 2001, Vertical CNC lathe Brand: DAEWOO (DOOSAN) Type: PUMA V550 Bsdpfezym Uxsx Afgjwu Year: 2001 (10,000 cutting hours) CNC: FANUC 18i-T Specifications: Turning capabilities: Maximum turning diameter: 800 mm Maximum workpiece diameter: 730 mm Maximum turning height: 750 mm Horizontal travel: 390 mm Vertical travel: 780 mm 3-jaw hydraulic chuck: Diameter: 500 mm Rotation speed: 20 to 2000 rpm Main motor power: 50/37 kW Dimensions (width x depth x height) without conveyor: 1,950 x 2720 x 3070 mm Weight: 9 tons Equipped with: 8-tool turret Set of turning tool holders Set of jaws Chip conveyor

Condition: used, Year of construction: 2008, Technical details: standard turning dia.: 200 turning length: max. 810 mm control: MSX-701 MAPPS III greates pass round over bed: 800 mm Max. distance between centres: 1130 mm max. turning diameter: 320 mm max. workpiecediameter: 300 mm bar material dia.: 65 mm Traverse X-Axis 1: 210 Traverse X-Axis 2: 210 mm Traverse X-Axis 3: 210 mm Traverse Y-Axis 1: 110 (+65/-45) mm Traverse Y-Axis 2: 110 (+45,/-65) mm Traverse Z-Axis 1: 300 mm Traverse Z-Axis 3: 300 mm Traverse Z-Axis 2: 810 mm Traverse B-Axis: 870 mm turning speed range - spindle: 5.000 1/min Number of spindle speed ranges: 2 . spindle nose: JIS A2-6 spindle bore: 73 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° turning speed range - spindle: 5.000 1/min spindle nose: JIS A2-6 spindle bore: 73 mm bar material dia. max: 65/52 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° Number of Turrets: 3 . Number of tool stations: 16 x 3=48 pos Schank height for square tool: 20 mm Diameter of boring bar: 32 mm turret changing time (4-stations): 0,18 sec Number of driven tools: 16 x 3=48 pos max. spindle speed driven tools: 6.000 U/min. Rotary tool machining ability: M16 / Ø16 . rapid traverse X-axis: 30 m/min rapid traverse Y-axis: 20 m/min rapid traverse Z-axis: 50 m/min drive capacity - spindle motor: 25 / 22 kW power capacity - driven tools: 7,5 / 5,5 kW total power requirement: 92,7 kVA weight of the machine ca.: 9,4 t dimensions of the machine ca.: 4,0 x 2,8 x 2,4 m Accerories Chip conveyor Coolantsystem C-axis in main and sub spindle Y-axis 2 x Bwodpfxezd Su Es Afgou part counter total counter tool setting Spindle 1 Chuck SMW KNCS-N 210 / 52 mm Spindle 2 Collet Chuck Hainbuch Spanntop nova Kombi Axfix 65 Robot interface Barfeeder Interface CNC Turning- and Milling Center MORI SEIKI NZ 2000 T3Y2 The NZ2000 T3Y has 2 spindles and 3 turrets, and 2 turrets have the Y-axis function and built-in milling motors. This not only allows synchronized machining using 3 turrets, but also achieves heavy-duty cutting and high-speed machining using rotary tools thanks to the built-in motor turrets. *

Condition: good (used), Year of construction: 2020, Maximum cutting diameter 305mm, maximum machining length 406mm, Bwodpszg Edlofx Afgeu bar capacity 63.5 mm, spindle speed 4000 rpm, 20 hp spindle motor, 12 station turret, coolant, and swarf conveyor, 3 jaw chuck, toolsetter,