Romi C1000

Romi C1000

Condition: good (used), Year of construction: 2007, CNC turning machine DOOSAN Type: PUMA 480 LM Year of manufacture: 2007 Control: Fanuc 21i T Technical data Swinging diameter mm 900 Turning diameter standard mm 380 Max. turning diameter mm 650 Turning length mm 2001 Travel X-Z axis mm 362/155 Bar diameter mm 165.5 Spindle bore mm 181 Chuck diameter mm 530 Spindle speed rpm 1500 Drive power kW 45 Tool turret number 12 Powered tools number 12 Speed of powered tools rpm 3000 Drive power kW 11 Accessories 3-jaw power chuck, tailstock programmable (following) with programmable center, chip conveyor with hinged belt, steady rest self-centering SLU 4 Ø 35-245 mm, tool load monitoring, coolant pump 14 bar, Hsdpfjzqzm Dox Ahget Automatic tool measuring arm.

Condition: good (used), Year of construction: 1999, functionality: fully functional, turning length: 3,000 mm, turning diameter: 1,000 mm, spindle bore: 197 mm, Upon request, videos of the machine in operation can also be provided. Maximum turning length: 6000 mm Hedpoyr N N Refx Ahget Turning diameter: over cross slide: 1000 mm over bed: 1250 mm Spindle bore: 197 mm Spindle speeds: 0 – 665 rpm Faceplate diameter: 1200 mm Workpiece weight: 15000 kg between centers Motor power: 55 kW / 74 hp 3 gear stages: 1.5-55 / 50-180 / 180-665 rpm Accessories: Sauter 4-position tool turret (rotation defective) Tailstock (hydraulics partially defective, pressure loss) Chip conveyor 2 chip guard doors (incl. safety device) 4-way bed machine (flat bed) LED lighting

Condition: new, Z-MaT CNC/Cycle Lathe FTL660-2000mm Control: Siemens 828D Shop Turn, 15" Touch Flat bed with linear roller guideways and telescopic cover Hjdpfx Aowwt Trshgst Hydraulic 3-jaw chuck 380 mm Ø Max. swing over bed: Ø700 mm Max. workpiece length: 1800 mm (with chuck) Max. turning diameter over cross slide: Ø480 mm Spindle Spindle bore: Ø120 mm Max. bar capacity: Ø110 mm Spindle nose: A2-11 Max. spindle speed: 1000 rpm Spindle power: 22/30 kW Tooling 12-position servo turret Tailstock Hydraulic tailstock MK5 Quill stroke: 100 mm Tailstock travel: 1850 mm (manual) Axes X-axis travel: 370 mm Z-axis travel: 2000 mm X/Z-axis rapid traverse: 15/15 m/min Bed type/guides: box bed/linear roller guides Bed width: 600 mm Accessories: Manual steady rest 110–260 Overall dimensions (L×W×H): 4.5 x 1.96 x 2.1 m Weight (approx.): 6.4 t The machine will be displayed at EMO, Hall 12/D10, and will be available immediately afterwards. Further sizes of this series can be found in the PDF.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, turning length: 2,200 mm, turning diameter: 630 mm, spindle bore: 132 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 10 rpm, travel distance X-axis: 350 mm, travel distance Z-axis: 2,330 mm, bar passage: 117 mm, Specifications Chuck diam. 450 mm 11′ Capacity Turning length: 2255 mm 1st Spindle Spindle nose: A2-11 ASA Bar capacity: 117 mm Spindle speed: 10-2000 rpm Motor power: 30/37 Kw Hsdey Uk Eaepfx Ahget C axis: si degrees 1st Turret Motorized turret: 12 Tailstock Cone: 5 CM Maximum swing over bed: 775 mm Maximum turning diameter over carriage: 630 mm Maximum turning diameter over bed: 690 mm SPINDLE Spindle bore diameter: 132 mm Draw tube internal diameter: 117 mm Main spindle motor power: 30/37 kW Number of mechanical speed ranges: 2 Maximum spindle motor torque (continuous / 30 min): 1980 / 2450 Nm CARRIAGE X-axis travel: 350 mm Z-axis travel: 2330 mm X/Z axis motor power: 7/7 kW Carriage guide inclination: 45° TAILSTOCK Tailstock travel with carriage coupling: 2255 mm Quill diameter: 160 mm Quill travel: 150 mm Maximum quill thrust: 2851 kg Machine dimensions: 6521 × 2154 × 2374 mm

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, Controller SIEMENS 828D with Shopturn and 17 inch Touch screen Swing dia 550 mm Turning length 428 mm Max. turning dia 300 mm Spindle bore 62 mm Max bar dia 51 mm Spindle face A2-6 Spindle speed 35 - 5000 rpm motorspindel Travel X axis 210 mm Travel Z axis 561 mm Turret 12-fold (all stations driven) Turret interlock hydraulic Turret drive servo Tool change time 0,2 sec. Tool section 25x 25 mm Max speed of life tools 5000 rpm. Hedpfx Ahswbu T Ujgst Max power of live tools 5 kW Max milling capacity (shaft mill) 16 mm Max milling capacity (milling head) 50 mm Max drilling capacity D16 mm Max tapping capacity M16x2 Rapid speed Z axis 30 m/min Rapid speed X axis 30 m/min Position accuracy 0,008 mm Repeat accuracy 0,003 mm Tailstock Pinole conus MT4 Travel of tailstock body 565 mm Hydraulic tank capacity 20 L. Power of hydraulic pump 1,5 kW Hydraulic power 3,5 - 6 Mpa Volumen of lubrication 2 L Power of lubrication pump 25 W Coolant tank volume 130 L Power of coolant pump 25 W Motor power cont. 11 kW 400 Volt 50Hz Motor power short time (30 min) 15 kW 400 Volt 50 Hz Weight 4000 kg Dimensions LxWxH = 2600 x 1685 x 1768 mm Accessories Coolant unit, Turret for 12 driven tools, 200 mm hydr. chuck, Linear guides and ball screws THK/Japan, SHOP TURN, Spindle cooler, Chip conveyor, Tool presetter, automatic tool length compensation, barfeeder interface, air blowing for chuck and turret, high pressure coolant, oil selector.

Condition: excellent (used), With sub-spindle With C-axis With Y-axis FANUC 18i TB Manual Guide control Turning diameter max 280 mm Turning length -400 mm Spindle speeds -6'000 rpm each C-axis dividing 0.001 ° Spindle taper ASA A2-5 Top turret tool holders 12 driven positions Barloader Piece catcher attachement Chip conveyor Misc. accessories MARCELS MASCHINEN CH Hodpozhmi Sefx Ahget

Condition: used, Year of construction: 2019, operating hours: 1,470 h, functionality: fully functional, empty load weight: 16,650 kg, fuel type: diesel, lifting height: 27,730 mm, drive type: Diesel, construction width: 2,480 mm, Articulating boom lift Technical condition: very good Front tyres type: solid rubber Front tyres condition: 80–100% Rear tyres type: solid rubber Rear tyres condition: 80–100% Battery condition: 80–100% CE certificate, Gradeability: 40% Travel speed – transport mode: 4.50 km/h Travel speed – work mode: 0.80 km/h Hodjvgh S Nopfx Ahgst Permissible tilt in work mode: 4° Hydraulic pressure: 400 bar

Condition: ready for operation (used), A Hwacheon CNC lathe is offered. Max. turning diameter: 680mm, swing over bed: 900mm, max. turning length: 1986mm, chuck diameter: 380mm, max. bar capacity: 116mm, max. spindle speed: 1800rpm, spindle power: 37kW/30kW, max. spindle torque: approx. 3071Nm/2493Nm, tool turret: 12 stations, tool interface: BMT-75, X/Z-axis travel: 360mm/2050mm, X/Z-axis rapid traverse: 18m/min, coolant tank capacity: 300l, control: Fanuc 0i-TF. Equipment: C-axis, driven tools, automatic in-process tool measurement, programmable tailstock and programmable quill, C-axis spindle clamp, chucking pressure monitoring, centralized lubrication and hinge-belt chip conveyor with chip container. Control ON: approx. 15961h, machining time: approx. 4258h, total part count: 34601. Weight: approx. 15000kg. Documentation available. Inspection possible by appointment. Hjdpjznc Rrefx Ahgjt

Condition: ready for operation (used), Year of construction: 2014, operating hours: 4,416 h, functionality: fully functional, turning diameter over cross slide: 500 mm, turning length: 630 mm, turning diameter: 350 mm, spindle bore: 65 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 195 mm, travel distance Z-axis: 660 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 3 m/min, rotational speed (max.): 3,500 rpm, total height: 1,720 mm, total length: 2,870 mm, total width: 1,675 mm, overall weight: 4,500 kg, chuck outer diameter: 260 mm, spindle nose: A2-6, Equipment: documentation/manual, rotational speed infinitely variable, De Hwacheon Hi-Tech 200BL is een robuuste CNC-draaibank die in de praktijk opvallend eenvoudig in gebruik is. De machine is overzichtelijk opgebouwd en werkt voorspelbaar, waardoor instellen en bedienen snel vertrouwd aanvoelt. Een groot voordeel is de configuratie met alleen een X- en Z-as. Door het ontbreken van extra assen en complexe functies blijft de bediening duidelijk en efficiënt. Deze HWACHEON HI-TECH 200BL machine is standaard voorzien van; Spanentransporteur + opvangbak. Schunk 3-klauw (ROTA NC Plus 260-86) inclusief div. setjes opzetbekken. Originele HWACHEON en FANUC documentatie. Gewicht & afmetingen: Hedeyvqw Sjpfx Ahgjt 4.500 kg +/- 2870 x 1675 x 1720 mm (LxBxH)

Condition: good (used), Year of construction: 2008, Center height: 445 mm Center distance: 4000 mm Swing diameter over bed: 890 mm Swing diameter over cross slide: 550 mm Swing diameter in gap: 1150 mm Spindle speeds: 0 – 1480 rpm Spindle bore: 106 mm Spindle motor: 22 / 33 kW continuous rating / S 6 (40%) Machine weight approx. 12,500 kg Accessories / Special features: • Cycle control FAGOR CNC 8055i TC with alphanumeric keyboard o 10.4" LCD color monitor o Graphic simulation of cycles o Electronic handwheel for manual machine operation • 3-jaw chuck • 8-station tool turret Hsdpfsyy Nlpex Ahgot • 2 fixed steady rests with rollers • Movable control panel • Automatic lubrication of headstock • Automatic lubrication of longitudinal and cross slides • Tailstock with hydraulically operated quill • Coolant system • CE conformity Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany