Used Capsuler Robino & Galandrino Fenix 2 2014

Robino & Galandrino Fenix 2

Condition: used, Year of construction: 1991, consisting of: -SIGMATHERM plate heat exchanger (heat exchange surface 21.5 m2) - Forerun tank 1200 l - Hilge product pump with manual control valve - Hilge hot water circulation pump - 500 l expansion tank - Shell-and-tube heat exchanger - Compressed air reduction station -Control cabinet with operating panel Additional title: juice heating plant for pasteurization Capacity: 100 hl/h Perm. working overpressure: 16 bar test pressure 20,8 bar Wärmeaustauschfläche: 21 m2 Length: 5,6 m Width: 2 m Iodpfx Agovcqy Ue Ioib Height: 2,4 m Operation / Control: Control cabinet with operating buttons Material: Stainless steel Base construction: Frame Features: 2 x vessels; plate heat exchanger; pipe heat exchanger; 2 x product pumps; process measuring and control technology. various valves and other fittings

Condition: used, Year of construction: 1995, Concentrating plant for the juice industry. The plant dates back to 1977 and was rebuilt in 1992. It was extended and equipped with a new cooling tower circuit. The plant is designed for 6600 kg/h of cloudy apple juice. With a single-stage concentration, the juice is thickened from 12° to 25°Brix. Up to 71°Brix can be achieved in the second pass. Additional title: with aroma recovery Input quantity apple juice: 6600 kg/h Water evaporation: 4840 kg/h Discharge quantity concentrated juice: 1760 kg/h Steam consumption: 1685 kg/h Length: 7,70 m Iodpfxswu N T As Ag Ijib Width: 6,70 m

Condition: used, Year of construction: 2022, Overview  This carbonating unit was manufactured in 2022 by German company KH TEC. The machine is designed for beer carbonation. The unit is stopped, still in production condition, and equipped with HMI and automated operation. It is available immediately and can be visited on request. The machine is being sold as it will be replaced by a new system. Technical data Capacity: 20 HL/hour Application: Beer Configuration: Automated, HMI-controlled   Ijdpfjyk Ab Dsx Ag Isib

Condition: ready for operation (used), A concentrate system for thickening and concentrating liquids, typically in the production of juices, concentrates or other liquids in the food industry, is available. Evaporator: horizontal, evaporator stages: 4, operating mode: live steam, heat exchange: preheating/recovery/cooling, condensation: semi-barometric milk condensation, flavor extraction: rectification/floor column. Water evaporation: 4840kg/h, inlet quantity: 6600kg/h, inlet dry matter: 12%, outlet quantity: 1760kg/h, final dry matter: 45%, aroma recovery at 150-fold concentration: 42l/h, steam consumption: 1685kg/h, specific steam consumption: 348g/kg, fresh water consumption: approx. 12700l/h. Documentation available. On-site inspection is possible. Iiodpfov Sugqjx Ag Isb

Condition: used, Year of construction: 2014, Used filling monoblock ALFATEK MBC 7/1 LP ELVIRA for re-fermented beer year 2014 This filling monoblock offers a compact and efficient solution for bottling re-fermented beer in glass containers. Consequently, Alfatek manufactured this machine with a gravity filling system to ensure a stable process that meets industry standards. Technical Features of the Used filling monoblock ALFATEK ELVIRA for re-fermented beer The ALFATEK MBC 7/1 LP ELVIRA filling monoblock for beer year 2014 includes 7 fixed filling valves, specifically designed to process beer in 0.33 L and 0.75 L glass bottles. Moreover, the gravity filling  prevents organoleptic alterations, and significantly reduces the risk of foam formation during filling. In addition, the integrated capper features 1 capping head for 29 mm crown caps, ensuring a secure and effective seal. Furthermore, this capping system works in synergy with the gravity filling process to maintain the internal pressure stability of the bottles. Operational Specifications Notably, the monoblock fills up to 1,000 bottles per hour, making it ideal for small to medium-sized production lines. As a result, bottles move through the system with a clockwise rotation, thereby optimizing workflow efficiency. Along with the monoblock, the conveyors are also included in the sale. They have the following dimensions: 1.80 m in length, maximum width 52.5 cm, minimum width 25 cm. Iedpev N Dcijfx Ag Isib Regarding electrical specifications, the Used filling monoblock ALFATEK ELVIRA for  re-fermented beer operates at 415V and 50Hz. Therefore, it remains compatible with most industrial plants. Safety and Structure of the Used filling monoblock ALFATEK ELVIRA for re-fermented beer Importantly, the machine includes safety devices that protect the operator during operation. Additionally, its compact structure measures 1,190 mm in width, 1,900 mm in length, and 2,330 mm in height, allowing seamless integration into existing production lines without major modifications. Current Condition and Availability At present, the Used filling monoblock ALFATEK ELVIRA for re-fermented beer remains in storage. Thus, it is ready for inspection and installation in a new production facility. Given its robust structure and advanced technical features, it presents a reliable choice for breweries looking for a high-performance and tested machine. Ultimately, this monoblock provides a valuable opportunity to improve production efficiency. Likewise, it represents a strategic investment in a well-maintained used system. Consequently, breweries can optimize their operations while reducing acquisition costs. Additionally, its compatibility with industry standards ensures smooth integration into various production setups. Therefore, this machine offers both efficiency and reliability, making it a practical choice for modern bottling facilities.

Condition: used, Die halbautomatische Verschlussmaschine RLC1 ist für die Verpackung von Glasflaschen mit 26 oder 29mm Kronkorken geeignet. Die Schließeinheit kann auf Kronkorken von 26 oder 29mm Durchmesser verwendet werden. Wenn man beide Durchmesser braucht, wird eine zusätzliche Schließeinheit geliefert. Der Schließkopf der Kronkorken ist aus gehärtetem Stahl, und auch im Laufe der Zeit ist er verschleißfest. Die Schiene führt die Kronkorken in der richtign Position. Die spezifische Form der Schiene wird spezifisch für die Kronkorken aus Edelstahl 304 gebaut. Diese enthält eine kleine Menge Kronkorken, die manuell eingegeben werden können. Die Schließeinheit zieht die Kronkorken aus der Schiene heraus und steckt sie in den Schließkegel. Den EG-Normen entsprechend startet der Verschlussprozess mit dem gleichzeitigen Drücken von zwei Tasten. Nach der Positionierung der Flasche auf den Halter, fängt der Verschlussprozess an, die Schließeinheit sinkt auf die Flasche und verschliesst der Kronkorken, automatisch kehrt die Schließeinheit zurück. Maße: L 0,41m H 1,96 m B 0,41 m Gewicht ca. 80kg Gewicht mit dem automatischen Trichter:140kg, Max Durchmesser der Flasche 220 ​​mm nutzbare Höhe max 500 mm Iiodpsx Iv Tiefx Ag Ieb

Condition: used, Year of construction: 2019, Used Capsuling Machine Nortan Prisma 2019 The Nortan Prisma 40 capper of 2019 is a cutting-edge machine, designed to guarantee high performance and reliability. Iiedpfxovgvyhj Ag Isb With a voltage of 400 volts and an absorption of 2 kW, a frequency of 50 hertz and a mass of 1400 kg, this capper is perfect for working with an air pressure of 6 bar. The machine is anti-clockwise and has a maximum speed of 2000 pieces per hour on both types of capsules, shrink and snare polylaminate. The operator panel, positioned on the upper left part, is analog and includes a small PLC. The control key and the start and stop are manual. This Nortan Prisma 40 capper is like new and immediately available in stock, after a short pre-maintenance to check that everything is perfect. If you are looking for a reliable and performing capper, this Nortan Prisma 40 from 2019 is the right choice for you.

Year of construction: 2022, condition: like new (used), functionality: fully functional, Systec Autoclave VX-150. Display with touch operation. Iijdpfx Agswurpto Isb Capacity: 166L. External dimensions (HxWxD): 112x65x92cm. Integrated printer. Loading basket with bucket. Tools for: filter replacement, water stopper. Temperature range: -10°/+150°C. Pressure range: -1/+4bar. Unused. Incl. functional guarantee.

Condition: used, Year of construction: 2013, operating hours: 1,700 h, Used Filling Monoblock Alfatek for olive oil 1500 bph General Features of the Used Filling Monoblock Alfatek for Olive Oil 1500 BPH The ALFATEK MBV 9/1 VOLUMETRICA SABRY filling monoblock, built in 2013, offers an efficient and reliable solution for bottling edible oil. It operates at a speed of 1500 bottles per hour, with clockwise rotation and a fully automated workflow. In fact, the machine currently runs in active production, having completed approximately 1700 operating hours. Moreover, it includes all safety protections, user manuals. Container Compatibility and Supported Formats The Used Filling Monoblock Alfatek for Olive Oil 1500 BPH handles a wide variety of containers. Specifically, it works with both PET bottles and metal cans, supporting the following formats: PET 138x138xh253 mm PET 148x148xh320 mm PET 81x81xh236 mm PET 63x63xh184 mm Cans 150x92xh192 mm Cans 150x92xh261 mm Cans 149x120xh315 mm Consequently, the machine adapts easily to diverse packaging needs. Whether the production involves small household bottles or larger industrial formats, this monoblock provides the required flexibility. Additionally, this versatility reduces the need for multiple machines, optimizing both space and investment. Filling Section: Volumetric Technology The filling section of the Used Filling Monoblock Alfatek for Olive Oil 1500 BPH uses 9 volumetric valves. These valves deliver accurate and repeatable dosing, which is especially important for high-viscosity products like olive oil. Notably, the system uses fixed valves and operates in a non-isobaric configuration. Therefore, it suits still liquids and avoids the complexities associated with pressurized systems. Furthermore, the volumetric method helps maintain product integrity while minimizing waste and overfill. Press-On Capping: Compatibility and Sizes The machine applies plastic press-on caps using one capping head, which supports multiple cap dimensions: Ø51.5 x 23 mm Ø37.5 x 22 mm Ø38 x 20 mm Because it handles non-threaded necks, the monoblock accommodates a wide range of container shapes typically used for edible oil. Additionally, the press-on capping system simplifies maintenance and allows for fast format changes. As a result, it ensures both high efficiency and reliable sealing performance. In short, it delivers consistent closure without the need for threading or torque control. Output per Format and Electrical Specifications Depending on the bottle size, the Used Filling Monoblock Alfatek for Olive Oil 1500 BPH achieves varying output rates: 2000 bph for 0.5L and 1L 1500 bph for 2L Iisdpfswiu Rvex Ag Ieb 1400 bph for 3L 1200 bph for 4L 1000 bph for 5L Thus, the machine performs efficiently across all common olive oil packaging formats. In terms of power, it operates on 415 Volts and 50 Hz, complying with industrial electrical standards. Despite its robust capabilities, the monoblock weighs only 300 kg, making it compact enough for mid-scale facilities. Moreover, its design facilitates both installation and relocation when needed.

Condition: used, Year of construction: 2013, machine/vehicle number: CA47, Used capsuling equipment Nortan Prisma 4T 6000 bph Iiodpfevguvzsx Ag Ijb This used capsuling equipment was rebuilt in 2013 as a new, and shrink-wrap capsule type. Safeguards are available for this Used rotary capsuling machine There are three different sets of bottle equipment available. The machine has been checked before dismantling. It is in good working condition and has been in operation until September 2021. It has automatic storage for the shrink capsules. A photocell connects the components to the main structure, which releases capsules for incoming bottles, completely automatically and synchronized. Despite its simplicity, maintenance is very important for this capsuling machine. The thermal heads and their gaskets, need to be checked carefully. The electrical panel is in order and complete with all cables and PLC, manuals, and wiring diagrams. The floor space required for this used capsuling machine square meters 4,50. Max. speed is 6,000 b\h. The Used rotary capsuling machine, has a whole set of stars, augers, and counter-stars to convey the bottle correctly. The direction of entry is from left to right and therefore clockwise. This machine is specific for glass containers. It can handle formats ranging from 0.50 L, to 0.75 L up to the size of 1 L. Nortan is one of the most common brands in circulation, it is therefore easy to find any spare parts for the machine.