Hydraulic pump,Hydraulic unit 315bar

REXROTH RRG

Condition: new, welding current 15 - 40 A cutting capacity 1 - 16 mm open-circuit voltage 96 V Required air-pressure min. 4 bar connected load 3,6 kW connected load frequency 230 V weight 9,0 kg Dimensions (LxWxH) 371 x 153 x 232 mm Exhibition machine !! Fgedpfsupxfhjx Alqsb Inverter plasma cutter with accessories: Cutting torch with 4 m cable, earthing clamp with 2.5 m cable, air pressure gauge, Mask and brush.

Condition: good (used), Year of construction: 1999, Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: Steel, crane chassis with electric cable winch -Cable pull: Type AS 3016-16 2/1 -Load capacity: 3200 kg -Main stroke: 8 m/min -Fine stroke: 1.35 m/min -Drive system: FA-C 3728 133-1 -Travel speed: 5/20 m/min Fsdpfotlzdqsx Alqsgb -Roller spacing: 1400 mm, dimensions see photos -Drum speed: 16.0 / 4.0 m/min -Quantity: 1 crane trolley available -Price: per piece -Transport dimensions: 1670/1200/H470 mm -Weight: 462 kg/unit

Condition: good (used), Year of construction: 1992, Indoor crane, crane, electric wire rope hoist, hoist, motor winch, motor winch, tackle, traction winch, block and tackle -Manufacturer: steel, crane chassis with electric cable pull -Crane chassis: Type GO 24 20 16 -Traveling speed: 20 m/min -Roller pitch: 800mm -Cable: Type AS 2010 -Traction: 1000 kg / load capacity 4000 kg Fsdol Tuvdspfx Alqjgb -Drum speed: 16 m/min / stroke 4 m/min -Lifting height: mm -Transport dimension: 1250/1180/H400 mm -Own weight: 356 kg

Condition: excellent (used), color: red, Year of construction: 2012, Year of manufacture: 2012 Payload: 1,000,080 kg Extendable body: Yes Technical condition: very good Optical condition: very good GOLDHOFER THP/MT/ST 28 HYDRAULIC AXLE WITH 1X GOOSENECK, 2X POWER PACK, 2X DRAWBAR + DRAWBAR HEADS THP/MT/ST MODULES: 2x 2-axle module 2x 4-axle module 2x 5-axle module 1x 6-axle module Fgsdpjw D E Tdsfx Alqsb 1 heavy duty gooseneck with hydraulic power pack 2x drawbar control kits Central lubrication system BPW hydraulic pendulum axle 8 tyres per axle line Remaining tyre tread approx. 50% Size 215/75 R 17.5 Year of module manufacture: 2009 to 2012 The complete axle set has new German TÜV inspection / APK / MOT Permissible total weight: 1008 tons at low speeds Follow us on Instagram: geurtsTrucks We speak German We speak English We speak Spanish

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 90 h, total height: 7,700 mm, installation height: 2,725 mm, ENERPAC SL400N hydraulic gantry system - SL400 2FT TRACK HYDRAULIC GANTRY, SET OF 4 LEGS - LL500 LIFTING LUGS 1250 KN EACH, 4 PCS - GST400-3 SKID TRACK / 2FT / LENGTH 3 METERS, 2 PCS - GST400-6 SKID TRACK / 2FT / LENGTH 6 METERS, 6 PCS - HBB10 HEADER BEAM BOX BEAM / LENGTH 10 METER 2PCS - HBB8 HEADER BEAM BOX BEAM / LENGTH 8 METER 2PCS - SSU600 SIDE SHIFT 1500 KN EACH / SET OF 4 INCL TP FRAME 4PCS *Self-contained hydraulic and electronic systems *Intelli-Lift wireless control system *Self-propelled wheels or tank rollers *Full range of supplementary equipment: header beams, lifting lugs, side shift units, skid tracks *Designed and tested in compliance with ASME B30.1-2015 safety standards *Lloyd’s witnessed testing at 125% of maximum working load Fsdpoylccqjfx Alqogb like new, only 90 working hours

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station Manufacturer: Rexroth/Hydraudyne, hydraulic station with oil cooler / accumulator / filter ... -Type: 03 HDJ -Engine power: 22 kW/1460 rpm -Tank capacity: approx. 240 liters -Pressure gauge: up to 250 bar -Individual components: pressure accumulator/hydraulic tank/filter/valves (see pictures) -Number: 2 units available Price: per piece -Dimensions: 1060/820/H1530 mm Fgjdjgz Irvjpfx Alqob -Weight: 738 kg

Condition: used, Year of construction: 2021, operating hours: 5,580 h, Sennebogen 6133 R Fgjdpfowtny Sox Alqeb

Condition: used, Screw compressor KAESER type BS 50 Fodpsiyu Ifefx Alqogb Serial no.: 402852 Year of manufacture: 1990 Volume flow: 5 m³/min. Operating pressure: 7.5 bar Main motor power: 30 kW Electrical connection: 400 Volt, 50 Hz Connection thread: 1 1/2" inch - 1107.90 hours of operation read - 749.00 load hours read - Sound-insulated Dimensions (L x W x H): 1600 x 1070 x 1350 mm Weight: 900 kg Very good condition Was a reserve compressor and has only few operating hours.

Year of construction: 1994, condition: good (used), Manufacturer: Boge Tip: V LEX 45 Fgodpfx Aehtq Dvslqeb Engine: 45 kW Capacity: 6.5 m3 / min

Condition: new, empty load weight: 15,420 kg, maximum load weight: 61,080 kg, overall weight: 76,500 kg, axle configuration: > 3 axles, loading space length: 8,600 mm, loading space width: 2,540 mm, loading space height: 900 mm, tire size: 235/75/r17,5, color: grey, Equipment: ABS, Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10° 3 pairs of lashing rings Hardwood decking 30 mm thick Loading platform: Loading area in extendable design with rear bevel of approx. 500 mm x 8° 8 pairs of lashing rings can be folded outwards 1 pair of lashing rings lying in the front of the cargo bed Cut-outs in the outer frame of the cargo bed for attaching lashing straps Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Two-part steel ramps: A pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood decking. Ramp with hydraulically folding and unfolding ramp sections, hydraulic lifting gear and hydraulically movable. Maximum load per pair: 50,000 kg. Fgsdpfx Alsl Sl Izjqob Seat posts: - JOST fifth wheels (mechanical) with 2-speed gearbox for 24t lifting load (50t test load). Axles and tires: BPW axles and suspension, 4th + 5th axle self-steering Technical axle load: 12,000 kg 4th and 5th axles with electro-magnetic reverse lock via reverse gear and manual activation Tires 235/75 R 17.5 3PMSF Brake system: Brake system in accordance with EU regulations with EBS-E (4S3M) Sockets and lighting: Electrical system in accordance with EU regulations, 24 volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Connection according to ISO 24N ISO-1185 24S ISO-3731 15 pole ISO-12098 Paint finish: First-class and durable corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in a single color in MB 7350 nova grey Rear section metallized and painted in RAL 9010 (pure white) No metallic paint finish possible Steel construction: Steel construction made from high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with holder in front of the bulkhead 2" kingpin One galvanized steel bulkhead approx. 400 mm high Yellow-red air couplings on the galvanized connection strip at the front 2 restraining shoes with holder on the bulkhead Mounting in the rear area of the gooseneck for ALU docking lights A bracket for a rotating beacon at the rear of the trailer Galvanized supports under the bevel of the loading area White reflective tape in accordance with EU regulations on the sides, on the extension and red at the rear Electro-hydraulic unit at the rear under the cargo bed A holder for the warning signs, including a socket, on the gooseneck and on the rear panel on the left and right respectively Control valves for the ramps mounted on the right-hand side of the trailer A mud flap at the rear of the trailer Manual and description on USB stick 3.5" kingpin supplied loose ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,440 x 400 mm (LxH) The rear galvanized stanchions are removable (length of the body approx. 2,560 mm) 3 pairs of WADER container pockets in the loading area for a 20' (30') or a 40' container 6 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed Galvanized extensions, extendable by approx. 230 mm per side Lift axle on the front axle with control by TEBS E depending on the current axle load and the current load status Square climbing rails 20 x 20 mm every 200 mm on the outer frame of the loading area slope On the chequer plates, above the kingpin and the load floor