Planer

Rex Homs 310

Condition: good (used), Year of construction: 1990, Four-side planer REX HOMS-310 AD - German production - year of production 1990 Pedpfx Aohikplof Sogt - for wet wood TECHNICAL PARAMETERS: - planing width max. 310 mm - planing height on both sides 300 mm - planing height on four sides 100 mm - 35 mm spindle diameter - 2 x 11 kW shaft motors power - spindle motor power 2 x 7.5 kW - feed speed adjustable on the variator - feed speed 6-36 m / min - four upper pulling shafts - two lower pulling shafts - four auxiliary rollers in the table top - brake - minimum length of the element 600 mm Machine dimensions: - length 290 cm - width 170 cm - height 210 cm - weight ~ 3500 kg

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: HaRo2020, total width: 800 mm, total height: 1,100 mm, total length: 1,200 mm, briquette diameter: 60 mm, overall weight: 300 kg, warranty duration: 12 months, type of input current: AC, input voltage: 400 V, power: 3 kW (4.08 HP), Equipment: emergency stop, Our new HaRo2020 briquetting press, with a capacity of up to 40 kg/h, automatic tongs, and pre-compactor, is manufactured by ourselves. You can only purchase this machine directly from us, as we do not use intermediaries. The briquetting presses are CE-compliant and manufactured according to the latest standards. Since we produce most of the components in-house, we can offer the machine at a particularly competitive price. Price is exclusive of VAT. The new hydraulic unit is equipped with a SILENCE-PUMP, making the machine extremely quiet in operation. Another benefit of the helical gearing in the pump is increased durability. Everything is made in Germany! You are welcome to visit us and test the machine with your own material. When purchasing our briquetting press, you will receive a detailed and comprehensive German (PDF) operating manual for this machine. The input material must have a moisture content below 15%—ideally 10 to 12%—for sawdust and planer shavings. Technical Data – Hydraulic unit: 3.0 kW (connected load) Pjdpfxow A Hvdo Af Sjgt – Power consumption per hour: approx. 1.8–2.0 kWh – Throughput: approx. 15–40 kg/h – Voltage: 400 V – Frequency: 50 Hz – Circuit protection: 16 A plug – Power cable length: 3 m – Hydraulic control with Bosch Rexroth valves – Briquette diameter: 60 mm (length varies according to material) – Motor equipped with motor protection switch and emergency stop—for operator and machine safety, including motor protection – No electronic components prone to failure such as controllers, sensors, or complicated electronics – Pressing without additives – Counter-pressure adapts fully automatically to your material – Thanks to the pre-compactor, bulky shavings are no problem – No adjustments or monitoring of the pressure required – Fully automatic operation Spare parts supply is guaranteed, as we manufacture the machines in small series in our facility in Germany. The large oil tank ensures that the oil will not overheat during continuous operation. Machine dimensions: Length: 1.25 m Width: 0.82 m Height: 1.11 m Feed hopper: Diameter approx. 80 cm x height 60 cm Weight: 300 kg The briquetting press is immediately operational and does not require installation—just plug it in and start working. The machine can be viewed and tested on-site. You are welcome to send us a sample of your material for testing; we find this is the most effective method.

Condition: used, functionality: unexamined, Planing machine with planing shaft at the top and bottom Double-sided planing machine Feed rate continuously adjustable up to 80 m/min Planing width max. 310 mm Planing height max. 310 mm Lower shaft 22 kW Upper shaft 30 kW Feed 7.7 kW Electrical connection 61 kW Pgedpfx Ajy Ryx Uef Sot Jointing device at the bottom and top Machine mounted on 2 steel supports, which are approximately 1.5 m longer than the machine Year 1990 Condition: good

Condition: used, Planing machine with planing shaft at the bottom and top Double-sided planing machine Feed rate steplessly adjustable up to 110 m/min Pgsdpfxey Ry Ddj Af Sst Planing width max. 310 mm Electrical power 95.75 kW Bottom: 37 kW Top: 45 kW Feed: 13 kW Jointing mechanism at the bottom and top Good condition

Condition: used, Fully automatic scarf jointing line for the following dimensions: thickness: approx. 24 – 100 mm, width: approx. 80 – 240 mm, scarf joint lengths: 400 – 1,500 mm, finished length: 2.50 m – 13.50 m, infinitely adjustable. Consisting of the following plant components: - SMB vacuum stacking system, longitudinal, with 2 lifting tables and 2 package conveyor lines, year of manufacture 2013, package dimensions max. 1.20 x 1.20 x 6.00 m, 4 suction pads, Sicko system, singulation and infeed into a conveyor line for scanner feeding, board turner, diverter for too moist, too dry, diverter for B-quality, marking station or automatic operation - Bidac end-face scanner for scarf joint detection, year of manufacture 2013 - Brookhuis moisture measurement FMI 5, year of manufacture 2019 - Microtec scanner Goldeneye 502, year of manufacture 2012 with X-ray, 4 color cameras, and new optimization software - Dimter Opticut 350-2, year of manufacture 2003 with paddle ejector, year of manufacture 2009, and associated sorting belts and pneumatic ejector for 2 additional qualities - NKT packaging - NKT scarf jointing system with rotary table, special pack AH 1050, year of manufacture 2005, consisting of: milling machine, tipping station, infeed section, length 5.0 m, cycle press, length 6.00 m, crosscut saw - SMB stacking machine, year of manufacture 1998, length 2.50 – 13.50 m, divisible into 2 units (e.g. 2 x 5.0 m), 8 stacking arms, 8 stacking tongues, manually adjustable stop, infinitely adjustable, electro/hydraulically controlled, package width: max. 1200 mm, package height: max. 600 mm, hydraulic package ejector. Podpfovvi Tyjx Af Sjgt Location: Customer

Condition: good (used), Swivel Spindle Milling Machine, Table Milling Machine, Bench Milling Machine -Spindle adjustment: height and angle -Swivel: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed apparatus Holz-Her 3 rolls -Useful shaft length: 100 mm -Spindle: Ø 30 mm -Max. Milling cutter: Ø 220 mm -Dimensions: 1540/1100/H1520 mm -Weight: 962 kg Psdpfx Ash Nvyzof Sogt

Condition: used, A complete sawmill machinery package is being sold as follows. Sale as a complete package is preferred, but individual items or reservations are possible! 1. Log infeed system, 2-strand Conveyor length: 5.5m Width: 2.8m 2. Rail car/cross conveyor, driven 3-strand Length: 4.0m Width: 2.55m Track gauge: 1.85m 3. Tensioning car, Mayrhofer with auxiliary car Track gauge: 90cm 4. Circular sawmill, Möhringer Model: OSS75 Year of manufacture: 1991 Stroke: 500mm Frame length: 750mm with drive motor with saw guide with saw blades with hydraulic saw tensioner with splitting wedge, Möhringer 5. Driven circular log transfer system Length: 9m Width: 1.4m Roller width: 1.2m 6. Spiral log transfer system Length: approx. 6m Width: 1.2m with lift for boards 7. Log transfer system Length: 14m Width: 1.1m Roller width: 0.85m with spiral log transfer system Length: approx. 7m Width: 1.1m Roller width: 0.85m 8. Cross conveyor, 4-strand Conveyor length: 2.3m Width: 4.2m 9. Double edger, Paul KME2 with cut-off saw with templates Pjdpfszb A R Hsx Af Sjgt with saw blades with drive motor with sawdust extractor with length sorting 10. Cut-off saw, Stihl with rail car 11. Circular saw sharpening machine, Vollmer CABG 12. Circular saw tensioning machine, RIVO GSA 13. Circular saw sharpening machine, Vollmer CNE (2 units available) 14. Forklift, Manitou MSI 50, year of manufacture 2002 with accessories 15. Wheel loader, Manitou / Ahlmann AL85t, year of manufacture 2001 with accessories

Condition: used, Year of construction: 2005, functionality: fully functional, cutting length (max.): 6,500 mm, input voltage: 400 V, - Year of manufacture: 2005 - Electrical diagram - Electric motor: 15 kW - Log cutting length: up to 6.5 meters - Control: stationary control panel - Additional equipment: - Hydraulic loading - Hydraulic hold-down - Hydraulic log turner - Roller adjustment - Debarker (for removing bark prior to cutting) - Dual-function hold-down - Side stops - Leveling rollers Pedpfx Afjyrdg Do Ssgt Machine dimensions: - length: 750 cm - width: 220 cm - height: 240 cm - weight ~1700 kg

Condition: reconditioned (used), functionality: fully functional, empty load weight: 2,400 kg, Compact sawing machine with mechanical centering infeed, el.motors 2x75 kW and 2x90 kW, machine can be equipped with edging block and electric-operating cabinet with frequency converters TECHNICAL DETAILS Top diameter: 80-230 mm Maximum log diameter: 350 mm Minimum log length: 2.4 m Cant height in Chipper Canter: 60-232 mm Cant width in Chipper Canter: 70-210 mm Line speed: 70-150 m/min Chip length: 20-30 mm Pedpexfrmwofx Af Segt

Condition: repair required (used), functionality: unexamined, Dovetail slotting machine for wood packages dimter HK 400 Dovetail slotting machine Input lengths: 800–6000 mm Cutting height: 285 mm, optionally 300 mm Color: Blue Consisting of: Pos. 01 Packaging unit Pos. 02 Package roller conveyor Pos. 03 Central milling cutter Pos. 04 Package roller conveyor Pos. 05 Package singulation unit Pos. 06 Chain cross conveyor Pos. 07 Infeed roller conveyor Pos. 08 Cycle press Pos. 09 Feed unit Pos. 10 Cut-off saw Pgodpfx Afevi Hw Ns Set Including control cabinets and operator panels The machine requires repairs and is sold in its current condition. It has already been dismantled and is stored in Achern. All technical documentation is available. We are available at any time to answer questions about the machine and provide technical information. We will provide consulting support for repair and reassembly.