Laser welder

REVOBOTICS

Condition: like new (used), Year of construction: 2016, Cleaning system type W 60 C Machine body, internal pipe system, switch cabinet and washing basket in stainless steel Combination machine - turntable system with removable turning device and small parts basket - Basket diameter turntable wash basket 600 mm - Usable interior height 370 mm - Basket load rotary plate wash basket 100 kg - Usable interior height 530 mm - Dimensions of small parts basket 375 x 220 x 200 mm Mesh size 12 mm - Basket load small parts basket 20 kg Complete stainless steel design Pump(s) and external piping/fittings Version for operation with Liquids with a density of 1.3 due to reinforced pump with frequency converter Chip/particle filter with bath cover plate ECO flushing (loss of sink) for minimum water consumption Water supply from the operator's mains supply with hot water supply on the machine side Hot air drying 1 x 4 KW Ffedpfx Afoq Ewgkonot Oil skimmer Pumping device/floor flushing with pump and pipe system in stainless steel

Condition: excellent (used), Year of construction: 2019, Cell with FANUC Arc Mate 100iD welding robot Year of production: 2019 Ffjdet Rwwrspfx Afnot Axes: 6 Reach: 1441 mm Load: 12 kg Fanuc System R-30iB Plus robot controller and 2 m x 2 m x 2.7 m housing (without Kemper extraction system)

Condition: new, table length 1300 mm table width 800 mm table height 920 - 1000 mm 1000 kg height of stroke 510 - 1550 mm total connected load 1,5 kW connected load frequency 230 V weight of the machine ca. 0,55 t Welding table on lifting table: Hole diameter: 28mm The table is made of 15mm thick S355 steel The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Ffsdpfx Asvn U Exsfnot Side panels 150 x 10mm Ribbed bottom for reinforcement.

Condition: used, Year of construction: 1991, Max. cutting length: 3100 mm Max. cutting thickness: 10 mm steel Motorized backgauge up to 1000 mm with digital display Side stops and table extensions cutting length limitation Cutting edge lighting Ffedpfx Afohlnv Uenot Weight: approx. 10,000 kg Attention: Back stop works slightly inaccurately (+/- 1 mm)

Condition: ready for operation (used), BTO 215 spring coiling machine + AB1 decoiler cap wire diameter: 0,4 1,5 mm winding diameter: max 45 mm max spring length: 100 mm max length of leg: 60 mm speed: 80 m/min power: min 3 kW / max 5,2 kW Ffsdpfewrt T Usx Afnst length: 1300 mm width: 900 mm height: 2000 mm weight: 700 kg

Condition: good (used), Welding rotary table Gieseking, 600 Kg load capacity good condition speed infinitely variable approx. 0,01 to 1,5 rpm with foot remote control diameter 0,8 meter height horizontal 0,95 meter height tilted to center of plate 0,8 meter length 1,2 meter Fodpfx Afslamrwsnjft width 1,1 meter

Condition: new, Year of construction: 2025, Y250 HC10 Laser Laser Welding System Compact, Flexible, Easy to Use - Integrated Robot Controller (YRC1000) - Yaskawa HC10DTP Cobot - Inxpect Radar Sensors / Increased Safety - Easy Mobility with the Pallet Truck - Extremely Simple Programming - Easy to Teach with the Yaskawa Smartpendant Fjdpsxyyw Hjfx Afnsft - Industrial Mode for Increased Speed Scope of Delivery: 1x Yaskawa HC10DTP Cobot with Integrated Robot Controller (YRC1000), Profinet, and Smartpendant (tablet programming device). Delivered assembled and ready for use on the robot platform. 3x Inxpect Radar Sensors / mounted on the robot platform. 1x Raycus 2kW fiber laser with water cooling 1x Wire feeder for the following wire thicknesses: Ø0.8, 1.0, 1.2, and 1.6 mm. 1x Ospri LWD200 laser head, QBH connector, 75mm collimator, 200mm focal length, water-cooled, including CDD camera and screen. 1x starter set consisting of: 1x Univet laser safety goggles, 5x protective lenses, 5x spare nozzles. Solid robot platform The mobile robot platform consists of a sturdy welded steel construction (250 kg weight) with a powder coating. This allows the robot to run at 100% speed while remaining mobile! Easy to position with the pallet truck. Laser power, power with reserves! Laser power: 1.5 kW - 2.0 kW - 3.0 kW RAYCUS RESONATOR Example: With the 2.0 kW fiber laser source, it is possible to weld steel up to 6 mm, stainless steel up to 5 mm, and aluminum up to 4 mm. The laser is a pure industrial device with water cooling for 24/7 continuous operation. TECHNICAL DATA -Model: Y250 HC10 2KW LASER -Range: 1400mm -Laser Power: 1500-3000W -Total Weight: 350kg -Safety: Inxpect radar sensors -Cobot repeatability: 0.05mm -Wire feed: Ø0.8, 1.0, 1.2, 1.6mm -Mild steel up to 6mm -Stainless steel up to 5mm -Aluminum up to 4mm -Cobot power consumption: 1KVA -Base dimensions: L x W x H 950mm x 750mm x 880mm -Water cooling: Yes

Condition: used, Year of construction: 2008, sheet width 3100 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm down holder 14 Stück no. of strokes 11 - 20 Hub/min oil volume 310 ltr. cutting angle 0.05 - 2.0 ° throat 350 mm table height 900 mm Fjdpfx Afjxaadasnsft total power requirement 22.0 kW weight of the machine ca. 13400 kg range L-W-H 5.110 x 2.570 x 2.400 mm Current new price approx. 80.000 Euro Special price upon request - in checked conditions - machinevideo - ?v=K4ymYMIJ7_Y ----- Robust electro-hydraulic CNC sheet metal shear with slide guides * Includes CYBELEC "DNC 60 CUT" control system * Includes CNC electro-hydraulic cutting gap adjustment * Includes CNC electro-hydraulic cutting angle adjustment ----- Equipment: - CNC electro-hydraulic guillotine shear with slide guides - Includes CYBELEC CNC controller, model "DNC 60" - CNC electro-motorized backgauge, travel range = 5.0 - 1,000 mm (X axis) * On recirculating ball screws * Automatically folds up at maximum travel, for longer cuts * Includes selectable retraction function ("swing-away function") * Positioning accuracy 0.1 mm * Approx. travel speed 80.0 mm/sec. - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment - 1x side stop with T-slot and mm scale - 2x front support arms with T-slot and mm scale - Ball transfer units in the front support table - Hinged finger guard with safety switch - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain behind the machine (safety device) - Rear sheet chute (sheet inserts) - 1x freely movable foot switch - CE mark - Operating instructions

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 18,331 h, load capacity: 3,500 kg, lifting height: 4,590 mm, fuel type: electric, mast type: duplex, construction height: 2,925 mm, drive type: Elektro, Electric 4-wheel forklift ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: good Battery voltage: 80V Ffodpfx Afox St Hzsnst Battery year: 2019 Sideshift, fork positioner, 3rd valve, 4th valve, heater, full cabin, air conditioning,

Condition: good (used), Year of construction: 2003, machine/vehicle number: A 10371, Offer 25448 Technical Data: - Max. working width: 3050 mm - Max. cutting capacity (St 40): 0.5 – 6 mm - Cutting angle adjustable (motorized): 0.5 – 3° - Blade gap adjustment: manual - Number of hydraulic hold-downs: 18 pcs - Motorized backgauge with SP8 positioning control: 10 – 750 mm - Strokes per minute (depending on cutting angle and length): 9 – 17 strokes/min - Hydraulic drive: 400 V / 7.5 kW - Table height: 770 mm - Space requirement incl. backgauge, w/o front support arms: approx. W 3750 x H 1600 x D 2450 mm - Weight: approx. 4500 kg Ffsdpfx Aex I I Uxjfnjt Includes: - Electric foot switch - Cutting line illumination - Angle gauge - 2 support arms - Rear area protection with side guard and light curtain