Milling machine

Reckermann Delta 1300

Year of construction: 2008, condition: ready for operation (used), Horizontal spindle diameter: 100mm, Horizontal spindle speed: 3600rpm, Horizontal spindle power: 25kW, Horizontal spindle torque: 920Nm, Vertical milling spindle swivel range: +/-90°, Vertical spindle diameter: 90mm, Vertical spindle speed: 3600rpm, Vertical spindle power: 25kW, Vertical spindle torque: 920Nm. Travel X/Y/Z: 1500mm/500mm/450mm, feed X/Y/Z: 4000mm/min, feed force X/Y/Z: 12kN/12kN/15kN, rapid traverse X/Y/Z: 15m/10m/10m/min. Table dimensions X/Y: 1800mm/500mm, number of T-slots: 5, center slots: 18H7, clamping slots: 18H9, center-to-center distance: 100mm, table load capacity: 2000kg. Horizontal spindle table distance: 450mm, horizontal spindle counter-holder lower edge distance: 345mm, vertical spindle lower edge table distance: 350mm-800mm, column brush vertical spindle center distance: 100mm-600mm. Machine dimensions X/Y/Z: approx. 3400mm/2900mm/2600mm, weight: approx. 5600kg, control system: Heidenhain, operating hours: 61440h. On-site inspection is possible. Dkodpfoulku Hox Akvor

Condition: good (used), Year of construction: 2003, Ref. -No.: 10618 Manufacturer: KELLENBERGER Type: 600 U Nr. 33 Year of construction: 2003 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175 - 250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0 - 5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 1500 / 1700 / 2200 / 3600 Swiveling grinding wheel head: 360 ° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Working speeds continuously adjustable (normal / special): 20-400 / 10-400 Dkjdpsya Dagsfx Akvor Max. Grinding length: 900 mm Further information: The machine can be viewed while powered up.

Condition: excellent (used), Year of construction: 1988, TECHNICAL DATA. Max. clamping length: 90 mm Tool clamping height with tapered shank: 50 mm Tool clamping height with straight shank: 45 mm Max. helix angle: 45° Number of clamping positions: 1 to 99 Max. slide travel: 550 mm Max. grinding wheel diameter: 350 mm Min. grinding wheel diameter: 150 mm Grinding wheel speed (variable): up to 2700 rpm Swivel range of grinding spindle axis: 0° to 15° Grinding slide feed rate (variable): 0.05 to 16 mm/min (with 3rd and 4th axis: 0.05 to 8 mm/min) Workpiece spindle taper: ISO Taper No. 40 Grinding Wheel Data Dkedpfx Akewwkacjvor CBN and diamond cup grinding wheel: Ø200 mm → Min. DFF: 66 (3rd axis), 76 (4th axis) Ø250 mm → Min. DFF: 16 (3rd axis), 26 (4th axis) CBN-ES cone grinding wheel: Ø200 mm → Min. DFF: 50 (3rd axis), 60 (4th axis) Ø250 mm → Min. DFF: 0 (3rd axis), 10 (4th axis)

Condition: good (used), machine/vehicle number: 630, with a swiveling (pivoting) vertical head Table size: 300 x 1,430 mm Table travels: longitudinal (X-axis) 1,000 mm vertical (Z-axis) 520 mm transverse (Y-axis) 360 mm Installation height under the milling spindle approx. 500 mm Overhang of the milling spindle min./max. 350 mm Dkodjbq Rugjpfx Akver Spindle mount: SK 40 Spindle speeds: 25 - 1,200 rpm Feed rate/rapid traverse: 12-900 mm/min Spindle drive: approx. 3 kW Total drive: 3.4 kW - 380 V - 50 Hz Weight: 2,400 kg

Condition: excellent (used), Year of construction: 1982, KLINGELNBERG SNC 30 GRINDER Brand: Klingelnberg Model: SNC 30 Type: Industrial grinder Year: 1982 Serial number: 3837 Dedjy S Akpjpfx Akvekr FEATURES: – Complete machine – Hydraulic unit and filtration system included – Heavy-duty industrial installation – Precision machine – Equipment visible in the photos

Condition: excellent (used), functionality: fully functional, Milling machine Saimp model FU-P2. Machine complete with axis display and dividing head. Used. Dsdpfx Asy N T Umekvjkr

Condition: ready for operation (used), 3x diamond cutting discs (individual sale possible) Dkodpfx Akjzkwkfovjr

Condition: excellent (used), functionality: fully functional, Universal milling machine, CME model FU3 CM, with a manually operated ram, table size 1700mm x 360mm, longitudinal travel 1200mm, transverse travel 350mm, vertical travel 500mm, plus the transverse travel of the motorized ram of 500mm. Huron-type spindle, ISO 50. Machine with rapid table feed, spindle speeds of 28-1400 rpm, main motor power 15 hp, ram power 7.5 hp. Digital readouts, single-axis steady rest. Machine in near-new condition. Dkodpfx Akjzmp Iujvjr

Condition: used, CME Universal miller model FU31CM, 1860 x 360mm table, (plus two covers at 300mm each) approx 500mm under tool, knuckle head, with horizontal attachment, , DRO Sony 4 axes ACURITE READOUT & SCALES.. 40 INT spindle. Machine in exceptional condition ex University. Dksdeywzlcjpfx Akvjr

Condition: used, total height: 2,000 mm, total width: 1,400 mm, total length: 1,950 mm, Colour: Grey Empty weight: 3.000 kg - Documentation available: Yes - CE certificate present: No - Drive system: Conventional - X-axis travel [mm]: 1000 - Y-axis travel [mm]: 220 - Z-axis travel [mm]: 450 - B-axis rotation [°]: 360 - Table length [mm]: 1300 - Table width [mm]: 300 - Min. spindle speed [rpm]: 31.5 - Max. spindle speed [rpm]: 2000 Dkjdpjyym Rcsfx Akvsr - Tools included: Yes - Transport dimensions: 1950mm x 1400mm x 2000mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum