Sheet metal folder

RAS 74.30

Condition: used, functionality: fully functional, Year of construction: 1988, Hydraulic Swing Bending Machine Make: RAS Model: 74.30, 3200 x 4mm Year: 1988 Technical Data Brand: RAS Year of manufacture: 1988 Model: 74.30 Working length: 3200 mm Capacity: 4 mm Stroke: 400 mm Motor power: 7.5 kW Dimensions: approx. L 4.5 x W 2.0 x H 2.50 m Weight: approx. 5.8 t Equipment • CNC-controlled backgauge 1500 mm • Multibend 8000 control system Nlodpoy Nx Ixofx Ad Rob • Motorized adjustment of the bending beam • Foot switch • Tools: - 3 sharp rails - 2 bending rails, 15mm and 30mm All data provided without guarantee. A demonstration is possible at any time in our showroom.

Condition: good (used), Year of construction: 1999, Machine is in good condition. X 750 mm Y 400 mm Z 500 mm Nlsdpfowx Rafex Ad Rob 10.000 rpm

Condition: good (used), functionality: fully functional, Year of construction: 2000, working width: 3,200 mm, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 3 mm, sheet thickness aluminum (max.): 6 mm, back gauge adjustment: CNC-controlled, power: 7.5 kW (10.20 HP), Equipment: documentation/manual, Very well-maintained and technically upgraded RAS 74.30 folding machine with a working length of 3200 mm. The machine has been specifically modernized and is immediately ready for production – ideal for metal construction and sheet metal processing. Technical data: Nlsdpfx Adey A Ewme Reb Working length: 3200 mm Max. sheet thickness: 4.0 mm (steel) Year of manufacture: 2000 Power: 7.5 kW Weight: approx. 5800 kg Equipment / Highlights: Motorized backgauge with swing fingers Travel path up to 2500 mm with stop extension Refurbished power supply Upgraded control system New SD card slot New flat screen (not yet visible in the photos) Reliable, robust industrial machine The machine runs smoothly and can be inspected under power.

Condition: used, Max. bending length: 3200 mm Max. sheet thickness: 4 mm steel Motor-controlled backgauge with folding cams up to 2500 mm with stop extension (disassembled) Motorized bending beam adjustment Njdpfoxl Dt Nox Ad Rolb Multibend 9001 control Segmented upper beam tool with automatic tool clamping (height 100 mm) operation manual Weight: 5800 kg

Condition: good (used), Year of construction: 1990, machine/vehicle number: 5211, Offer 24289 Technical data: - max. cutting width 3060 mm - max. cutting capacity at 45 Kp/mm² 4 mm - Cutting angle 1.50 ° - Cutting gap - adjustment via adjusting screws - Number of hold-down devices 15 pcs - Stroke rate 23 to 43 /min - Front angle stop - Motorized backgauge position-controlled 15 - 850 mm - Cutting line lighting - E - foot switch Nedpfxst Ucgaj Ad Rjlb - Drive 400 V / 7.5 kW - Space requirement approx. W 3900 x H 1600 x D 2400 mm - Weight approx. 4.5 t

Condition: used, functionality: fully functional, Year of construction: 1990, machine/vehicle number: RAS 74.30; MB8001, control type: CNC control, working width: 3,200 mm, installation height: 2,400 mm, bending angle (max.): 135 °, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 3 mm, sheet thickness aluminum (max.): 5 mm, back gauge adjustment: CNC-controlled, back gauge travel distance Z-axis: 1,500 mm, overall weight: 6,000 kg, total width: 4,000 mm, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, The machine is in good condition. Control unit and relay board have been overhauled. Complete, segmented gooseneck tool, H=100, is included. Njdpfx Adsx Av Uae Rolb

Condition: good (used), Year of construction: 1998, functionality: fully functional, pressing force: 35 t, working width: 2,000 mm, pressure 35to max. bending length 2000mm Nedpfx Aewagyked Rslb arrester behind drive capacity 4,5 kW weight 3000kg

Condition: used, Miter cold circular saw KALTENBACH type KKS 400 NA Machine. No. 101701 Year of construction 1983 saw blade diameter 400 mm cutting range at 90° round Ø 130 mm sawing range at 90° square 120 x 120 mm Nlodpfsd N H A Njx Ad Reb sawing range at 90° rectangle 305 x 20 mm Cutting range at 45° round Ø 130 mm Sawing area at 45° square 110 x 110 mm Cutting range at 45° rectangle 245 x 30 mm Clamping range of collet feed 30 to 140 mm Working height 1000 mm miter cut 0 - 180 feed path 600 mm Saw blade speed 10 + 20 m/min. 2 steps motor power 1,7 and 2,6 kW hydraulic motor 1,5 kW Mains connection 380 Volt, 50 Hz - Hydraulic material clamp feed with infeed roller conveyor left 1500 mm - Feed path via double feed up to 1200 mm (2x feed, then sawing) - Hydraulic material clamping with vertical clamping cylinder - miter cut - saw angle with manual adjustment - hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for the saw blade speed - saw blade stroke steplessly adjustable - coolant unit with electric pump in the machine base - Hydraulic unit fixed to the basic machine - Parts counter with zero cut-off space requirement of the saw 2600 x 1200 x 1900 mm weight of the saw approx. 1400 kg good condition

Condition: good (used), Year of construction: 1988, Press brake, bending machine, swing bending machine, die bending machine -Handover: in its current condition as inspected -Function: Manual operation (no automatic operation) -Manufacturer: RAFAMET Swivel bending machine type KM-4 -Drive: mechanical -Max. working width: 2020 mm Nedpfov Tpxqex Ad Rslb -Max. sheet thickness: 4 mm -Stop depth: 750 mm -Connected power: kW -Dimensions: 3350/1540/H1510 mm -Weight: 3900 kg

Condition: ready for operation (used), Year of construction: 2020, Control Unit Brand HAAS Nlsdpfx Asx Enh Tjd Rsb Model NGC Main Drive Number of axis 3 Movement X-Axis Movement 1270 mm Z-Axis Movement 635 mm Y-Axis Movement 508 mm This 3-axis HAAS VF-4 vertical machining center was manufactured in 2020. It features a 1270 mm X-axis, 508 mm Y-axis, and 635 mm Z-axis travel, supporting a table load up to 1588 kg. Equipped with a 20-station tool magazine, chip auger extractor, and a Renishaw OTS tool probe. Consider the opportunity to buy this HAAS VF-4 vertical machining center. Contact us for more information about this machine. Application Types Milling