RÖDERS RHP 500

RÖDERS RHP 500

Condition: excellent (used), Year of construction: 2007, 1.) Work area: 500x552x300 mm 2.) Max. workpiece weight: 400 kg 3.) Milling spindle: 42,000 rpm Hjdpfsyaa Umox Ak Djl 3.) Tool changer: 42 positions 4.) Guide system: Hydrostatic on all axes 5.) Drive: Linear motors 6.) Control: Röders RMS6 7.) Machine weight: approx. 10,000 kg 8.) Required space: 3015x2510x2750 mm

Condition: used, Used Trumpf 5axis laser for sale / 3d laser for sale Used Trumpf 5axis laser for sale / 3d laser for sale Trumpf TLC Cut 5 Year 2006 Fully serviced twice a year by Trumpf Uk Hjdpfx Ajfuah Nek Dol Last service January 2019 New vacuum pump fitted – 28/05/19 Hours: Beam on: 14,922 hours Laser on: 59,480 hours 3.2kw Fully serviced. Jigs / cutting beds included. Delivery and installation can be arranged.

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 20 [mm] - Max. machining length : 50 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Z stroke : 150 [mm] - X stroke : 225 [mm] - Spindle speeds : 8000 [rpm] - Spindle power : 1.1 [kW] Hsdpfx Aouha Umek Dol - Number of guide bush holders : 1 GUIDE BUSH HOLDER 1 - Number of positions : 5 - X/Y stroke : 97/133 [mm] SECONDARY OPERATION - Number of positions : 3 POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 6 [kW] WEIGHT & DIMENSIONS - Machine floor space : 1063/2033 [mm] - Machine height : 1666 [mm] - Machine weight : 1700 [kg] EQUIPMENT - CNC : CINCOM 18iTB - Coolant tank - Bar loader : IEMCA SMART 320

Condition: used, Year of construction: 2015, x-travel 635 mm y-travel 510 mm z-travel 460 mm Hsdpewm Rtbofx Ak Dsl Control DMG

Year of construction: 1995, condition: ready for operation (used), A Schenker spring coiling machine including a 2-finger coiling system (left and right), a multiple stroke device and a Böhm MRS-1 length measuring device is available. Wire diameter range: 0.4mm-1.8mm, spring outer diameter: 2mm-30mm, production capacity: 400 springs/min, max. material strength: 2400N/mm², spring outer diameter range: 2mm-30mm, wire feed length: 30mm/470mm/770mm/1200mm. Machine dimensions X/Y/Z: approx. 1150mm/900mm/1450mm, weight: approx. 1000kg. In 2008, the drive motor was replaced by a frequency-controlled servo motor. Documentation available. On-site inspection is possible. Hjdpsv Ip Smofx Ak Dol

Year of construction: 1980, condition: used, Compressed air dryer, refrigeration dryer Hedsckgivjpfx Ak Djl -Max. Pressure: 16 bar -Operating voltage: 380 V -Dimensions: 1050/950/H1770 mm -Weight: 556 kg

Condition: used, Year of construction: 2014, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 24 m/min, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, torque: 18,500 Nm, controller manufacturer: Heidenhain, controller model: iTnc530, table width: 600 mm, table length: 1,120 mm, table load: 800 kg, overall weight: 6,500 kg, spindle speed (max.): 8,000 rpm, coolant supply: 30 bar, distance table center to spindle nose: 680 mm, spindle nose: SK 40, number of spindles: 1, number of slots in tool magazine: 24, tool length: 300 mm, tool diameter: 90 mm, tool weight: 6 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Additionally, the machine is equipped with: - Spindle change-over gearbox - Flat guideways - Centralized oil lubrication - Control cabinet cooler - Spindle oil cooler - Grundfos IKZ pump - Oil skimmer - Hand wheel - Renishaw 3D measuring probe - Signal lamp Hsdpfoyh Ri Iex Ak Dol - Tool cabinet - Various tool holders

Condition: used, Year of construction: 2014, X-travel: 1250mm, y-travel: 1280mm, z-travel: 150mm, max. feed rate: 15m/min, repeat accuracy: 0.01mm, spindle rotational speed: 0-24,000/min, software: VCarve Pro, data formats: HPGL-3D / G-Code, spindle power: 6.5kW, controls: Siemens Sinumerik 808D Milling, weight: 1.2t, with collet spindle, Phenol vacuum high-pressure table, 850W servo motors Yaskawa, steel base, precision ball screws in all axes, x-axis with dual drive, linear guides, protective cover for all drive axes, suction foot for chip extraction, automatic spray cooling and material sensor. Hedpfx Aowqd Rhek Djl

Condition: new, Model Name Hjdek Au Drjpfx Ak Djl B3 Entgrat-/Anfasmaschine

Condition: excellent (used), Year of construction: 2016, operating hours: 12,229 h, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed length X-axis: 585 mm, feed length Y-axis: 250 mm, feed length Z-axis: 400 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, nominal power (apparent): 21 kVA, controller manufacturer: Heidenhain, controller model: TNC640, total height: 3,000 mm, total length: 2,370 mm, total width: 2,845 mm, overall weight: 8,000 kg, spindle speed (max.): 42,000 rpm, operating hours of spindle: 2,256 h, number of spindles: 1, number of slots in tool magazine: 90, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, MP7-5 Axis Heidenhain iTNC530i with integrated pallet changer, 36 pallet positions Travel range X/Y/Z: 730 x 250 x 400 mm B-axis travel range: +/- 105 degrees C-axis travel range: infinite Work area X/Y/Z: 585 x 250 x 400 mm Max. workpiece weight: 60 kg Distance: machine table to spindle nose: 450 mm Machine dimensions (W x D x H): 2845 x 2370 x 3000 mm Machine weight: 8000 kg Equipment/Features: Cooling unit Rotary tilt table 160 (B/C-axis) Workpiece measurement: Renishaw OMP400 Tool measurement: BLUM Dynaschine collision controller (DCM) Table chuck: EROWA PowerChuck P 150 Pallet changer 36-fold EROWA ITS50...148 Tool changer: 90 positions for HSK40 MHT media distributor with 3 dosing settings Control system: Heidenhain iTNC530 HSCI FS Milling spindle: Steptec HVC140 Spindle power S2/S6 40%: 10 kW / 13 kW Spindle speed: 42,000 rpm HSK40 Hedjw U D Igjpfx Ak Del Z-axis compensation Exo-call fault indicator Exo-net remote diagnostics Network connection Portable control panel HSCI FS Pressure amplifier for chuck Transport, training, and commissioning on request