Heat exchanger / vacuum unit

Prang, Alco WT-36-50-2, ZN 6466

Condition: ready for operation (used), Machine was overhauled and is fully functional, with documentation. Bljdpsfw Az Ujfx Aa Ejd

Condition: excellent (used), functionality: fully functional, WORKING MEASUREMENTS: Useful tape width: 55cm Number of spirals: 18 Spiral diameter: 4.20 m approx. Height of product entry: 1.20 m Height of product exit: 3.70 m Technical description: DRUM: It is the element in charge of transmitting the movement to the belt, it is built by stainless steel profiles welded to a base ring formed a kind of cage. MAIN STRUCTURE: It is the part of the tunnel that supports the conveyor belt (through an auxiliary structure) and the drum (through the bearings). It is built with folded and welded stainless steel plate profiles. AUXILIARY STRUCTURE: It supports the belt in its movement. To avoid metal-to-metal contact, it is covered with a special high density polyethylene profile. DRUM SUPPORTS: The lower supports have two main functions: centering the drum and supporting its weight. In the upper part, other supports are placed whose mission is exclusively to collaborate in the centering of the drum. EVAPORATOR: A circular evaporator located at the bottom of the drum is used, which results in an important space saving and in a horizontal air circulation without dead spaces. FANS: Fans are placed at the top and at the bottom with the discharge directed towards the inside of the evaporator so that the air flows through the evaporator towards the product. The fans will be sized so that the air velocity, both through the evaporator and through the product, is adequate. Bljdpjwnzahofx Aa Eed TRACTION: Consists of an electric motor-reducer of adequate power, with previously calculated reduction ratio, so that the speed of the drum and therefore of the belt are suitable. SPEED VARIATION EQUIPMENT: This consists of a frequency variator that, by varying the power supply frequency to the preset electric motor drive (between 20 Hz. and 60 Hz.), modifies its speed and therefore the output speed of the reducer, which allows us an appropriate retention time in each case. CONTROL PANEL AND MANEUVERING BOARD: The control panel includes the electrical and maneuvering elements of the Tunnel. In its front panel there are the general maneuvering controls, as well as a synoptic of operation and with the indications of the safety and alarms indicated with a luminous signal. Inside are the control elements, frequency variator with potentiometer, electronic starters for fans and other equipment protection elements.

Condition: ready for operation (used), A Seitz filter machine including a Schenk dosing device for beer production is available. 1) Kieselguhr frame filter Seitz Orion 60, max. throughput capacity: 70hl-80hl/h, effective throughput capacity: approx. 45hl/h, max. total filtration capacity: approx. 600hl, pressing device: 2-stage planetary gear, number of plates: 36, number of end plates: 2, plate dimensions X/Y: 600mm/600mm, pipe diameter: 50mm, nominal width: NW50, machine dimensions X/Y/Z: approx. 3800mm/1100mm/1400mm. 2) Dosing device Schenk DO-S120, year of construction: 1971, capacity: approx. 160l/h, high-speed capacity: approx. 320l/h, nominal width: NW50, pipe diameter: 50mm. Documentation available. On-site inspection is possible. Bledswd Talepfx Aa Esd

Year of construction: 2020, condition: new, Dereater is used for the removal of air bubbles from the purée. The air bubbles mix with purée during the pulping. Made of stainless steel. Bljdocl Tt Ropfx Aa Ejd Deaeration takes place in a vacuum container. operating temperature approx. 50°C. Water-ring-pump for achieving vacuum in the container integrated. The puree is sucked out by pasteurizer pump. Level switches in the container to control the pump for liquid inlet and outlet. Electricity supply 400V / 50Hz / 16A Power Consumption: 2,2 kW Water supply: approx. 100 l/h

Condition: good (used), filter area: 21 m², pressure: 15 bar, cake thickness: 25 mm, System: Chamber filter press Rittershaus & Blecher Type: 0-22-080-2230-00 Design: Chamber filter press Filter plate format: 800x800/59 Cake thickness: 30 mm Year of construction: 1989 Blodeqakdbopfx Aa Eed Number of plates: 24 pieces Filter cloths: optionally available in coordination with the medium Press capacity: approx. 310 dm3 / final capacity approx. 430 dm3 Filter area: approx. 21 m2 / 29 m2 Filter pressure: approx. 15 bar Dimensions LxWxH 5480x2000x2660 mm Safety device: e.g. light barrier etc. optional by arrangement Purchase or rental: Inspections of the systems by arrangement at our factory. Miscellaneous: We can supply the system used and ready for operation or refurbished according to your wishes and requirements; would you like to rent or buy this system? Please contact us, we will be happy to assist you.

Condition: good (used), Year of construction: 1990, functionality: limited functionality, Name: Chamber filter press Manufacturer: Passavant Type: AX 1200 Year built: 1990 Construction form: Bridge beam press Filter pressure:: 15 bar Press content: Approx. 1800 liters (expandable to 2500 liters) Cycle: Closed Filter area: Approx. 127 m2 (expandable to 175 m2) Plate size: 1200 x 1200 mm Number Plates: 51 (expandable to 70) Plate material: Polypropylene Plate Transport: Automatic Cake thickness: 30 mm Closing pressure: 360 bar Dimensions: L 8000 x W 1900 / 2500 x H 2300 + 600 mm Technical doc.: Yes Message: Available in mid-February 2024 Accessories: A hydraulic system, a light barrier, high pressure pump Condition: Second hand Blsdpfeq Tab Aox Aa Ejd Price: On demand

Year of construction: 1988, condition: ready for operation (used), A sheet filter (EK filter) Seitz Orion is available. Plate dimensions X/Y: 600mm/600mm, number of plates: 80, filter area: approx. 22m², filtration capacity: 45hl/h, connection: DN50. Machine dimensions X/Y/Z: approx. 3300mm/1000mm/1500mm, weight: approx. 1250kg. An on site inspection is possible. Bsdpfx Aaexyzgis Ejld

Condition: good (used), For sale: Luwa Wiped Film Evaporator – Robust build from 1984 Are you looking for a reliable and durable wiped film evaporator for your production process? This Luwa SMS (Butzbach) unit is an excellent example of Swiss engineering, designed for continuous operation in demanding industrial applications. Technical Specifications: Blsdjxgb D Ispfx Aa Eed Manufacturer: Luwa SMS GmbH, D-6308 Butzbach Serial number: 4.4948.02 Year of construction: 1984 Tube pressure: max. 6 bar Permissible temperature in tubes: 250 °C Tube volume: 19.4 liters Shell (jacket) pressure: 1.5 bar Shell temperature: 93 °C Shell volume: 9.8 liters

Condition: used, Used concentration / evaporation system previously used to separate water from surfactant. Capacity for this process was approximately 8-12 m3/day of water/surfactant mix. System was built by Ecotecno during 2011/2012 and was shut down in April 2022. System described as a single effect vacuum evaporator with condenser. Includes flash reservoir in vacuum, distillate tank, vacuum tank, plate heat exchanger. Bljdpfx Aoyhc Ifoa Esd Full documentation for equipment available.

Condition: used, Filterplate 600x600 stainless steel Material: AISI 304 13mm complete with screws Bsdpjxytulsfx Aa Eold 2 plates with holes 2 sliding shous gaskets seperatly suitable for Seitz PALL Orion A60, B60 OEM Order number: Fs 50763