Hydraulic unit 75 kW 250 bar double pump

Voith Loher IPC5-40 IPC6-30 KNGA250SB-04Z

Condition: used, Year of construction: 1982, spindle diameter 90 mm x-travel 900 mm y-travel 900 mm z-axis 1200 mm w-axis 800 mm table surface area 900 x 1200 mm rotation movement 360 Grad table load 6,0 t turning speeds 25 - 1400 U/min spindle taper ISO 40 voltage 380 V / 50 Hz drive milling spindle 9,2 kW total power requirement 35 KVA weight of the machine ca. 10 t dimensions of the machine ca. 4,5 x 2,8 x 2,5 m Lhodpjtv H Ucjfx Adwjg • Machine had been completely refurbished in 1994 by the manufacturer • new switch cabinet, • new Servo-drive BOSCH and HEIDENHAIN-control TNC 360,(3D control) • valve plate Ø 600 mm. • traverse distance: 150 mm The machine is currently not ready for demonstration due to a fault in the electrical system.

Year of construction: 1991, condition: like new (used), overall weight: 1,420 kg, rotational speed (max.): 1,485 rpm, 3 stainless steel volute casing pumps in process design 2 x CPK-CM 250-315 built in 1991 1 x CPKN-C1 250-315 year of construction 2011 !!! Price per piece !!! Pumps were operated on a test bench and all have very few operating hours! See pictures !!! Flow rate: 1001 m³/h (278 liters / second) Delivery head / delivery pressure: 18 m / 1.8 bar Pump speed: 1485 1/min NPSH: 5.00 m Lhedoqabiaepfx Adwsg Shaft seal: single mechanical seal with sealing water Manufacturer: Burgmann Impeller type: closed centrifugal impeller Impeller diameter: 324mm Bearing type: roller bearing Lubrication type: Oil Lubricant monitoring Oil level controller Materials: 1.4408 (AISI 316) Pump housing: 1.4408 (AISI 316) Wear plate: 1.4408 (AISI 316) Pressure cover: 1.4408 (AISI 316) Shaft: Heat-treated steel C45+N Impeller: 1.4408 (AISI 316) Bearing bracket lantern: Gray cast iron JL1040 Shaft sleeve: CrNiMo steel Nominal diameter of suction nozzle: DN 300 Discharge connection Nominal diameter: DN 250 Nominal pressure suction side: PN 16 Nominal pressure pressure side: PN 16 Coupling manufacturer: Flender Coupling type: Eupex NH without intermediate sleeve Base plate: Painted gray cast iron Motor manufacturer: VEM K21R 280S4-Z Efficiency class: IE 0 Motor speed: 1480 1/min Frequency: 50 Hz Rated voltage: 400 / 690 V Rated motor power: P2: 75 kW Thermal class: F Motor protection class: IP55 Cosphi: 0.86 Dimensions: Length: 2120 mm Width: 950 mm Height: 1090 mm Weight: 1420 kg

Condition: good (used), Year of construction: 1962, High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine -Clamping table: 400 x 1100 mm -Projection: 930 mm -Taper mount: MK4 Lsdpfx Aoirax Uodwehg -Engine power: 1.35/1.8 kW -Speed: 41-1700 rpm -Columns: Ø 200 mm -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg

Condition: ready for operation (used), machine/vehicle number: 5722, table mounting size: 190 x 710 mm Lsdpfx Adoflrg Tewehg table movement x: 390/360 mm table movement y: 150 mm table movement z: 280 mm spindle taper: SK 40 spindle turning speed range: 100 - 3100 rpm carriages longitudinal: 0 - 600 mm/min electrical connection: 380 V, ca. 1,5 kW space needed: 1400 x 1200 x 1500 mm weight: ca. 680 kg

Condition: used, System: used piston diaphragm pump / pump Type: HMD-G-50-500 Ljdpfx Adsdkdi Tswshg Flow rate: 40.0 m3/h Pressure: 1,6 MPa

Year of construction: 1993, condition: excellent (used), 2 centrifugal pumps Manufacturer: KSB Model: WKF 50/7 Flow rate: 5.5 l/s (19.8 m³/h) Head: 214 meters (21.4 bar) Max. temperature: 130°C Seal: Mechanical seal with flushing water connection Electric motor: VEM Drive power: 30 kW Speed: 2935 rpm Lodpfoibwarsx Adwjhg ! Price per unit !

Condition: used, Year of construction: 1999, operating hours: 3,400 h, machine/vehicle number: 261724855, TRACTOTECHNIK GRUNODRILL 10S year: 1999 Working hours: Reading Lhedpfx Adjhd I S Uswsg - hole diameter: max. 385 mm - maximum torque: 2500 kN - tractive force 96 kN - compressive force 65 kN - max. drilling length 250 m - power: 90 kW - drill rods and bits included - complete equipment with separate engine, hydraulic power pack and tank for drilling fluid - engine Perkins 119 kW / 162 PS This offer is subject to change, input errors and mistakes excepted. Only the concrete agreements in the order confirmation or in the sales contract are valid. The basis for this contract are exclusively our General Terms and Conditions (GTC). These are available on our homepage at any time or can be requested from us. Place of jurisdiction is Eberswalde, Germany. If you have any questions, please do not hesitate to contact me More Information Intended use: Construction,

Condition: good (used), Year of construction: 1992, Indoor crane, crane, electric wire rope hoist, hoist, motor winch, motor winch, tackle, traction winch, block and tackle -Manufacturer: steel, crane chassis with electric cable pull -Crane chassis: Type GO 24 20 16 -Traveling speed: 20 m/min -Roller pitch: 800mm -Cable: Type AS 2010 -Traction: 1000 kg / load capacity 4000 kg Lodpfxel Tuvds Adwehg -Drum speed: 16 m/min / stroke 4 m/min -Lifting height: mm -Transport dimension: 1250/1180/H400 mm -Own weight: 356 kg

Year of construction: 2009, condition: good (used), machine/vehicle number: 120P1109, OFFER 21407 Mot. tank-boiler turning device with rail trolley Technical data: - Total payload driven + travelling unit 40000 kg. - payload per vessel device 20000 kg Lhsdpfxjhcnhmj Adweg - workpiece diameter approx. 500 - 3500 mm - Centre distance of the support rollers adjustable via trapezoidal thread spindle - roller diameter 500 mm - roller width 150 mm - driven unit with drive on both sides - infinitely variable rotational speed - manual remote control for Re- and Li.-run - drive 400 V - Both units are mounted on rail trolleys - space requirement with running unit approx. W 3800 x H 1150 x D 1350 mm - Space requirement with running unit approx. W 3600 x H 1150 x D 1350 mm - Weight attached unit approx. 2500 kg - Weight with running unit approx. 1800 kg

Year of construction: 2016, condition: new, 1 piece reconditioned unused industrial bevel helical gearbox from ASUG. TGL 21815 All parts of the gearbox are renewed, except the housing !!! Claw coupling: 800 mm (only one half available) Maximum torque: 27.829 Nm Lhjdpogwlrdofx Adwsg Gear ratio: i= 1:80 max. power: 51 kW oil filling: 170 kg Speed: n1= 1400 Speed: n2= 17,5 weight: 1450 Kg Shaft diameter d1: 65mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Total height h2: 925mm Length from base: 1170 mm !! Gearbox has no oil cooler !