Parts Cleaning System

Pero KDA50WSNT

Year of construction: 2022, condition: as good as new (ex-display), Aluminum angled conveyor incl. mobile substructure horizontal area 1,100mm Rising area 1,500mm Pitch angle in bend 60° Total conveyor length: 1,750mm Tsdpfxei Igikj Amyea Discharge height: approx. 1,600mm Height of the horizontal: 300mm (feed height) Conveyor belt width 500mm PU conveyor belt including driver and corrugated edge petrol matt Drive: motor 0.25KW, speed 0.2m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 4x freely steerable transport rollers with parking brake 2 pcs. corrugated edges 50x35mm 11 pieces T-50 studs welded on in the middle - 481mm pitch 2-layer particularly laterally stable Usable width 290mm, results as follows: Transverse arrangement -70+30-5+290-5+30-70mm

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, cooling capacity: 680 kW (924.54 HP), Equipment: cooling unit, condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture:2004 Tjdpfx Amsvllxdsyoa Nominal power 680.4 /579.2 kw Refrigerant:R404 Refrigerant content:218.9+25 liters Flow rate: Temperature range: -50°C- +100°C Max pressure: Operating pressure: 28bar/-1bar (performance depends on usage parameters) Number of fans: 5 pcs, diameter 900 mm, Air flow:162500 /131000 m3/h Motor power consumption:17.60/11.50 Kw Heat exchanger aream2 Operating noise 52 dB Length: mm Height: mm Width: mm Weight: ca kg The radiator has been technically inspected, fully functional

Condition: new, Year of construction: 2025, operating hours: 24 h, functionality: fully functional, DOLFİN-PYM2 series parts washing machines are industrial purposed parts cleaning devices that are used before and after revision, particularly in repair and maintenance services. While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labour. It works automatically in accordance with the temperature and time values that are set during operation. In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley. Tedpfx Amsv Sa I Teyja

Condition: new, Year of construction: 2023, total length: 6,700 mm, total width: 1,500 mm, total height: 2,950 mm, warranty duration: 12 months, overall weight: 2,200 kg, power: 12 kW (16.32 HP), Machine height : ~2.950 mm Machine width : ~1.500 mm Machine width with open doors : ~2.950mm Machine length : ~2.950 mm Table diameter : 1.200 mm Tsdpfxjvr Tbas Amyoa Maximum work piece height : 500 mm Maximum table capacity : 500 kg Number of blast wheels : 1 x 7.5kW E-Eco Frequency inverter for turbine : 1 pcs Blasting time : Adjustable PLC : Siemens S7 1200 + TP 4'' Filter : PC2 (1.500m3/h) Total installed power : ~12 kW Application for sandblasting truck rims: YES Application for sandblasting pipes from 1’’(24mm) to 8’’(203mm) :YES This type of machine can be assembled before delivery, it takes just a day to prepare it for work. The machine is in stock. A test of the machine in our premises is possible with prior notice

Condition: used, Washing machine Manufacturer: Nowicki Tsdjttz Urjpfx Amyoa Model: MPU-600/1P Made of stainless steel Dimensions: 390x140x200cm Electric power: 7.7kW Voltage: 3 x 400V 50Hz Weight: 740kg

Condition: used, Parts cleaning system from renowned Austrian company Tsdpfx Ajvcrutomyoa Machine comes from company liquidation, was in operation until the end. Cleaning agents are included.

Condition: new, metric thread diameter (min.): 3 mm, metric thread diameter (max.): 16 mm, overall weight: 500 kg, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 200 mm, torque: 24 Nm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 50 rpm, power: 0.005 kW (0.01 HP), The CMA 3-axis controlled tapping center is designed for the post-processing of laser-cut sheet metal parts and complete processing of small parts and tubes, for example. The machine offers the following processing options: - Thread cutting - Drilling (standard / with chip breaking / hollow profile cycle) - countersinking - Flow drilling (with optimum feed curve) - reaming - Simple graphical programming - Import of 2D DXF or DWG files - Machine table according to System 28 (similar to Demmeler and Siegmund welding tables, among others) Tsdpfx Aerbz T Njmyea - Radial compensation of the tool by means of patented tool holder (accessory) - Tool probe for length measurement and as a breakage detector - Intuitive safety system using light barriers Standard version: Automatic tool changer with 10 positions, mounted on the machine portal

Condition: excellent (used), Year of construction: 2024, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: 111549, air demand: 6 m³/h, operating pressure: 6 bar, total width: 1,300 mm, type of input current: three-phase, inner dimension length: 8,000 mm, I am pleased to present a custom-built Rosler 100-4 HD machine. This machine is used for shot blasting steel parts, where a high surface roughness is required. - Year of manufacture: 2024 - Machine operating time: 4000 hours - Mesh conveyor belt made of manganese steel, 1000 mm wide - Adjustable speed of the conveyor belt - 4 turbines, power 11 kW, Rutten Gamma 330 HD model - Continuously variable turbine speed control Todpfx Amjwvgbgeyja - Automatic part detection - Automatic abrasive flow control - Automatic abrasive filling - Automatic part blow-off - Rosler BF 40/40 dust collection system - The machine is additionally equipped with a wet dust collector, which enables the shot blasting of aluminum parts (additional installation fee applies). - Hot Spot chamber made of manganese steel and tool steel - The machine allows operation with media of the highest hardness (GH, sharp-edged) or cut shot, making it an ideal solution for the rubber industry, where high surface roughness is needed during the rubber vulcanization process. - Turbine blades made of cemented carbide guarantee 30,000 hours of operation. - Turbine housings made of cemented carbide provide even greater protection against wear and tear on the machine body.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 200 V, pressing force: 160 t, table length: 600 mm, overall weight: 19,000 kg, punching force: 160 t, height adjustment type: electric, installation height: 1,900 mm, ram adjustment: 100 mm, stroke adjustment: 130 mm, Equipment: documentation/manual, safety light barrier, Manufacturer: AIDA Type: NC2-160 Push force: 160t Year of manufacture: approx. 1991 Stroke length: 130mm Distance above table: (adjustable) 285-335mm Table size: 1900x600mm Bear size: 1360x585mm Tsdeu D Dhxspfx Amyja Electric power: 3x200V(!!), 15kW - Japanese standard Net weight: 19000kg Size: 2140x2210x3175mm Automatic greasing system. Optionally sheet feeder winder and straightener.

Condition: like new (used), Stainless steel storage tank 5.000 liter Dimensions: (diameter)1.850 mm x (height) 2.200 mm Storecapacity: 5.000 liter Tsdpfjhridcsx Amyoa Material: SS 304