Control unit

Oto Mills Joint Strip - Giunta Nastri

Condition: ready for operation (used), approx. 120 pieces = 480 running meters of safety conductor rails Number of conductors / number of poles: 5 in standard lengths of: 4 m Busbar cross section: 10 mm² for mains voltage up to: 500 V Iisdpfxjd Hurbo Aa Ejd Load capacity at 100% ED: 60 A Weight per meter: 2.1 kg

Condition: used, Cut To Length CTL 2000x8, made by BRONX Strip width: 600 - 2.000 mm Isdpfx Aaoymclbe Esid Strip Thickness: 2 - 8 mm Coil max. weight: 30 Tn Coil Outer Diameter: Up to 2.100 mm Coil Inner Diameter: 508mm - 610mm - 762mm with filler segments Sheet Length Stacker: 600 - 8.000 mm Stacking Capacity: 1 x 8000mm long x 2000mm wide packs Stacking: 10000kg maximum uniformly distributed over 5000mm sheet length Pack Height: 750 mm Max. speed: 60 m/min

Year of construction: 1990, condition: good (used), coil weight: max. 15 t coil OD: max. 1.800 mm Isdpfsbibu Tjx Aa Eeid

Condition: used, functionality: fully functional, machine/vehicle number: T331051593, Year of construction: 2006, operating hours: 5,323 h, load capacity: 16,000 kg, lifting height: 3,980 mm, fuel type: diesel, mast type: simplex, construction height: 3,920 mm, power: 147 kW (199.86 HP), fork carriage width: 2,950 mm, fork length: 2,400 mm, empty load weight: 24,300 kg, drive type: Diesel, construction width: 2,950 mm, Heavy-duty forklift - diesel Chassis number: T331051593 Load center: 1200 Fork width: 250 mm Fork thickness: 100 mm ISO class: Terminal West Mast type: Standard Transmission: Dana Clark 342TE13310-20 Condition: Operational and fully functional Technical condition: Good Front tires type: Pneumatic Front tires size: 12.00-20 Front tires condition: 40 - 60% Rear tires type: Pneumatic Iiodpfx Aaoyy Effj Esd Rear tires size: 12.00-20 Rear tires condition: 20 - 40% Description: Overhauled transmission with warranty (repaired for €17,000.00) 2,950 mm wide fork carriage Side shifter, fork positioner, 3rd valve, 4th valve, front work lights, heater, fully enclosed cab,

Year of construction: 2018, condition: refurbished (used), Flying cutoff unit TCC 120/168, made by OTO MILLS Recently revamped Complete flying cutoff unit including: Isdpfx Aovtpp Noa Eeid - Accelerator (carriage transmission) - Main carriage motor - Cutoff unit TCC120 with base with linear guides, cutting head, clamping unit and support for tube at exit side - Control panel RENEWED - Electrical cabinet RENEWED - Hydraulic group - Cable chain - All existing documentation, manuals, drawings Specifications: - Type of saw : Friction - Material thickness : 1 –6 mm - Standard tube length : 3 –12 m - Diameter range : 42 –168 mm - Square tubes : 40x40 –130x130 - Rectangular tube : 50x30 –180x80 - Max. speed : 120 m/min - Length tolerance : +/-2 mm Round tube diameter: 42 – 168 mm Square tube diameter: 40×40 – 130×130 mm Rectangular tube diameter: 50×30 – 180×80 mm Material thickness: 1 – 6 mm Tube length: 3 – 12 m Type of saw: Friction Length tolerance: +/-2 mm Max. speed: 120 m/min

Condition: used, Automatic packing machine Manufacturer : MAIR Model : .90.D.5.SL Automatic strapping machine with automatic wood support insertion Isdpfx Aaovtp Hbo Ejid Manufacturer: ITIPACK Model: SKE/M/TS-31 J-WILT/4MR Working range Diameter round: 16 - 90 mm Thickness range: 0.8 - 5.0 mm Length: 3,5 - 10 m INCLUDING - Rollway (aprox.24m) with 2 sections - MAIR .90/D/5/SL, for hexagonal & rectangular bundles - Bundle lateral conveyor to strapping - AUTOMATIC Strapping machine ITIPACK with wood insertion - Longitudinal chain conveyor of strapped bundles - Bundle weighting and emulsion draining station - Bundles transversal chain for storage section - Electrical control and operator control panel Thickness: 0.8 - 5.0 mm Tube diameter: 16 - 90 mm Length: 3,5 – 10 m Rectangular bundle: 200 x 200 mm - 650 x 520 mm Hexagonal bundle: 230 x 200 mm - 600 x 520 mm Bundle weight: 3 Tn

Condition: used, SIGNODE AUTOMATIC STRAPPING STATION, model M400 The formed bundle is automatically transferred, by the driven rollers of the evacuation trolley, to the automatic Strapping Station. The bundle will be stopped at the programmed strapping positions to allow the automatic application of the steel strap. It is composed of: - SIGNODE automatic Strapping Machine Model M400/PA/TSM for vertical strapping, - Pneumatic strapping floating head for steel strap of 32 mm. width (1¼") and 0,9 mm. wall thickness; - 450 kg. jumbo coil dispenser with electrical unwinding; - Switchboard. SIGNODE automatic Strapping: Machine Model M400/PA/TSM for vertical strapping Pneumatic strapping floating head: for steel strap of 32 mm. width (1¼") and 0,9 mm. wall thickness Isdpfx Aswxxz Rea Eoid 450 kg. jumbo coil dispenser: with electrical unwinding Switchboard: Included

Year of construction: 2026, condition: refurbished (used), LINEAR CAGE FORMING TUBE MILL VAI 89.5(6) with universal CTA forming Specifications: - Manufacturer: VAI Voest Alpine Industrieanlagenbau - Round tube diameter: 33.7 - 88,9 mm - Square tube: 30x30 - 70x70 mm - Rectangular tube: 40x20 - 100x40 mm - Thickness: 0.8 – 5.0 mm (6.0mm with S235J2) - Speed: 100 m/min Complete line with: - Double expandable mandrel with PEELER OTO AD408 SD - Strip entry line with strip opener, driven pinch-roll, pre-leveller and lateral guiding rolls - Automatic strip joiner - Intermediate strip guding stand - Break down section - Forming section : Universal CTA Forming section VAI CTA90 - Fin pass section - Welding section - Double Cooling tunnel - Sizing section - Off-Line sizing stands - Turk-head section - Motorised Exit roller conveyor Scope of supply: 1. Double expandable mandrel with PEELER OTO AD408 SD - Strip width 500mm - Hydraulic expansion - Snubber roll top/bottom - 8 Tn/arm - Pneumatic servocontrolled brake 2. Strip peeler - Strip opener 3. Strip Guiding 4. Break down section - 2 motorised stands - Monoblock casted stands - Hydraulic gauge compensation and quick setup - Shaft diameter 89mm - Mechanical SIKO indicator - Total installed power 106 kW 5. Forming section - Universal CTA Forming section VAI CTA90 6. Fin pass section - 2 motorised FP with rafted quick change - Monoblock casted stands - Hydraulic gauge compensation and quick setup - Shaft diameter 89mm - Mechanical SIKO indicator - Total installed power 106 kW Ijdpfx Ajy Uhxkea Esid 7. Welding section - 4-roll configuration - Heavy duty welding head with lateral and top adjustment 8. Double Cooling tunnel - 2 x 4000mm With V-rollers support 9. Sizing section - 4 motorised sizing cages - Total installed power 260kW - With quick-change rafted stands - SIKO bottom and top indicators 10. Off-Line sizing stands - 4 motorised sizing cages - Total installed power 260kW - With quick-change rafted stands - SIKO bottom and top indicators 11. Turk-head section - 3 turk-heads - Heavy duty changing plates 12. Complete set of rolls Round tube diameter: 33.7 - 88,9 mm Square tube diameter: 30x30 - 70x70 mm Rectangular tube diameter: 40x20 - 100x40 mm Thickness: 0.8 – 5.0 mm (6.0mm with S235J2) Speed: 100 m/min

Year of construction: 2021, condition: ready for operation (used), total height: 1,300 mm, product length (max.): 4,500 mm, Used Pipe Production Line Brand: Bazhou Wanxin Industrial and Trading Year of manufacture: 2021 Pipe Production Line Consists of: Dual-Station Decoiler Function: Passively unwinds the coil. Construction: Dual-station design with 180° rotation; manual expansion. Advantages: Fast loading, simple and convenient operation. Hydraulic Shear and Butt-Welding Machine Function: Cuts the front and rear ends of the strip, centers the strip, and welds it back together. Construction: Manual hydraulic shear with boom, front and rear pressure rollers, front and rear centering rollers, welding device. Cutting Method: Hydraulic shear Pressing Method: Double-cylinder press Welding Method: Manual welding Coil Accumulator Function: To ensure continuous production of the welded pipe, a storage unit is installed after the shear and butt-welding platform. It continuously feeds the strip while the material is prepared for loading, unwinding, cutting, and welding. Construction: Frame type, with movable and fixed frames (including feeding device). Feeding Speed: max. 120 m/min Storage Speed: max. 200 m/min Stored Strip Length: 200-400 m Pinching Roller Motor: AC 11 kW Forming and Calibration Machine Working Height: +850 mm Power: AC/DC Motor 160 kW, 1000-2000 rpm Reducer: Gear-hardened Arrangement: Passive 5-roll straightener, vertical rolls for strip feeding; forming via 7 horizontal roll stands and 8 vertical roll stands; guiding, pressing, deburring, cooling, and calibration via 6 horizontal roll stands and 5 vertical roll stands; 1 round calibration stand. Round Calibration Stand: 1 set of smoothing device; 2 sides with 8 rolls, 4 rolls per side; Ø30 mm, 40Cr, quenched, tempered, and hardened. Horizontal Roller Shaft: Ø60 mm, bearing position 55, material 40Cr Horizontal Roll Surface Treatment: Surface hardening, HRC 50-55 Bearing Slider: Forged steel 45# Vertical Roller Shaft: Ø40 mm, material 40Cr, quenched, tempered, and hardened Vertical and Horizontal Rollers - Stand Style: Gantry type, opening width 120 mm, horizontal roller stand clamping adjustable via worm gear Material of Horizontal and Vertical Roller Stands: Welded, followed by aging annealing Gearbox: Spiral bevel gear Pinching Roller Shaft: Ø50 mm, 2 rollers for pinching, adjustable via manual screw rod Guide Shaft: Ø40 mm Deburring Knife: 2 pcs, one in operation, one as spare Cooling Tank Cold Saw Function: The cold saw is one of the key machines in the ERW mill line. It can cut the pipes to the preset length during high-speed production. Type: KK-5-50 Iijdpjyhfvlsfx Aa Esd Pipe Diameter: Round pipes Ø16-63.5 mm and corresponding square and rectangular pipes Cutting Length: Any length between 1-6 m Material Thickness: 0.6-2.5 mm Saw Motor: 11 kW AC motor with frequency inverter Feeding Motor: 2.9 kW servo, Yaskawa Drive Motor: 11 kW servo, Yaskawa Feeding Mode: Servo multi-stage speed feeding Speed Following: max. 110 m/min Clamping Force: Pneumatic Saw Blade: Ø400 mm Saw Reducer Model: KK-80 Sawing Stroke (Rack Length): 3 m Machine Dimensions: 4500 × 1500 × 1300 mm Conveyor Track, Table, and Packing Machine Function: Formed pipes are automatically transferred from the roll to the table. They are packaged into hexagonal bundles using a simple packing machine. Roller Track Length: 16 m, 1 motor YCT200-4A, 5.5 kW Note: The technical data and descriptions are transcribed from the original order confirmation. They are for informational purposes only and are not binding.

Condition: good (used), machine/vehicle number: 3375, Year of construction: 2007, load capacity: 15,000 kg, lifting height: 4,000 mm, mast type: duplex, fork carriage width: 280 mm, fork length: 2,200 mm, total length: 5,250 mm, total width: 2,950 mm, operation weight: 24,180 kg, additional equipment features: Warning triangle, Centralized greasing system, Front mud guards, Equipment: lighting, Kalmar DCE150-12 from Uniktruck Wheel type – Drive wheel: Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 12.00-20 Wheel size – Steering wheel: 12.00-20 Iisdpfoyuic Njx Aa Eed