Plasma/gas cutting machine

Otinus PCV-3015-DG

Condition: new, Year of construction: 2022, Power: 1,1kW Drilling capacity steel / continuous drilling capacity: 30mm / 25mm diameter Speed range: 120 - 1810 rpm Ncjdpfx Ahsgulr Hsvon Speed steps: 9 Spindle mounting: MK-4 Drilling stroke: 120 mm spindle throat: 254 mm table size: 475 mm x 425mm Drilling table lateral tilting / rotating: 45° left / 360°. column diameter: 80 mm Quick chuck: 1 - 16 mm Weight: 132 kg

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), color: red, overall weight: 4,500 kg, empty load weight: 3,000 kg, maximum load weight: 1,500 kg, Year of construction: 2025, FARMER 815T The modern telescopic loader FARMER 815T – professional and robust. The FARMER 815T model is the ideal machine for agricultural operations, construction companies, electricians, installers, renovation firms, and service providers in similar sectors. We also guarantee customer support even after the warranty period has expired. The loaders are manufactured under supervision of European technicians and based on European technology. The machine is built on a stable chassis and can perform reliably under all conditions. The comfortable, glazed cab ensures safe and pleasant working conditions. TECHNICAL DATA: Model: FARMER 815T Total weight: 3000 kg Overall dimensions (L×W×H): 4100×1520×2450 mm Rated bucket capacity: 0.25 m³ Maximum lifting capacity: 1500 kg Dump height: 2200–3000 mm Lifting height: 3450 mm Discharge height (maximum reach when dumping): 700 mm Wheelbase: 2100 mm Track width: 1405 mm Rear chassis articulation angle: 8° Maximum steering angle: 31° Total cycle time: 11 s ENGINE: Model: YUNNEI Power: 25 HP Type: Direct injection, horizontal, water-cooled, 4-stroke, 3-cylinder Rated output: 18.8 kW Rated speed: 2400 rpm Minimum fuel consumption: ≤1800 g/kW·h HYDRAULIC SYSTEM: Working pressure: 18 MPa Boom lifting time: 4 s Nedexp Ibxopfx Ahvocn Total boom lift/lower time: 7 s Fuel tank capacity: 55 l Hydraulic tank capacity: 65 l Automatic leveling: YES DRIVE SYSTEM: Standard: Fully hydraulic Transmission type: Fixed-axle, constant mesh gearbox Gear range: 2 forward gears / 2 reverse gears Maximum speed: 22 km/h BRAKE SYSTEM: Service brake: Foot-operated, drum brake (mechanical) Parking brake: Hand-operated, disc brake (mechanical) TYRES: Standard tyres: 31×15.5-15 Optional tyres: 19.0/45-17/MP Tyre pressure front: 320 kPa Tyre pressure rear: 320 kPa PRICE: €21,700 net €25,823 gross KINGWAY DEUTSCHLAND is the exclusive point-of-sale distributor for the Kingway brand in Germany. Here, you can inspect and test all machines on site. We are the largest importer of construction and agricultural machinery in Europe and the Kingway headquarters in Germany. We have a huge selection in stock, with around 100 machines available at any time. We deliver machines throughout Germany, Austria, Switzerland, Italy, and other neighboring countries, and we offer our customers access to all spare parts and mobile service. KINGWAY DEUTSCHLAND Jakub Dylus 84098 Hohenthann Gambacherstr. 4 STOCK: Untergambach 10 84098 Hohenthann

Year of construction: 2009, operating hours: 11,300 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Preperation for grab use and oscillator Nodpfx Ahjh Ty Arsvjcn MAN Engine LD 2842 LE 103 with 670 kW 2x 30To Winches with 36mm ropes 25 to hook Basismast, Mast: 2x 6m + Masthead

Condition: new, Capacity, mm ----- 25 x 2 mm Radius, min/max ----- 10/100 mm Radius difference ----- 90 mm Bending speed/repeatability ----- 500º/s. ±0.05 Tube length ----- 1 350 ∞ mm Weight ----- 2200 kg Machine dimensions ----- 3.0 x 1.2 x 1.3 m Tube rotation ----- 0-850°/sec Ncjdpfx Aega T Exehvon Length feeding ----- Standard 0-2 400 mm/sec Booster ----- 0-1 200 mm/sec Degree of tolerance ----- 0,05°/mm Bending head rotation ----- 0,75 sec Standard components conform to VDMA, ISO and DIN standards. OPTIONS * Online connection with CAD system and measuring machine * Automatic tube magazine with free programmable robot or loading arm arm * Weld seam detector and tube positioner electromagnetic or optic detection * Free radius bending * Simulation/Collision Control * Bed length extension

Condition: new, shaft diameter: 80 mm, - Ring bending machine - Shaft diameter 80 mm - The two lower rollers are moved hydraulically - Three rollers are driven - Two digital displays - Brake motor - Can be used horizontally/vertically - Mobile control panel - Emergency stop Ncsdpfoucqquex Ahvsn - Documentation - 400 V

Year of construction: 2024, condition: as good as new (ex-display), -usable internal dimensions: D=970mm H=540mm (other sizes on request) -touch screen -injection pressure: 3 bar -basket load: 200kg -Tank volume: 210L -Standard accessories: - Oil skimmer - Frame, cover and housing made of stainless steel - Time-controlled electric steam extraction - Reinforced basket in stainless steel - Stainless steel electric pump - Stainless steel filter on the suction side of the pump - Stainless steel heating elements - Mechanical basket rotation with gear motor - Electrical system IP 65, control via SPS (DGT V4) - Automatic water supply - Safety limit switch monitors the cover opening - Spray nozzles in stainless steel - Weekly timer for heating and oil separator Ncedsf A Nq Uopfx Ahvon - Operating hours counter

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Njdpew Iq Ugsfx Ahvecn Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Condition: used, Year of construction: 2018, operating hours: 16,700 h, functionality: fully functional, We are selling our plasma cutter from MicroStep. If you are interested in the machine, we would be happy to provide you with detailed specifications. Below is the scope of supply as per our original order confirmation: 1. The MasterCut Compact Series | Guide Machine Technical Data: Machine designation: MasterCut Compact 3001.15Prk Machine number: 2534 Cable drag chain side: left Working area: 3,000 x 1,500 mm Permissible sheet thickness: robust design for materials up to 100 mm thick Guides/Drives: high-quality linear guides with backlash-free dual drive Axis control: digital, maintenance-free AC servos with IRC Positioning speed: up to 40,000 mm/min Measuring system: IRC 2500 (incremental encoder) MicroStep® CNC control system iMSNC with integrated network card One LCD control unit on the gantry Laser pointer with automatic offset transfer iMSNC® Module | Expert system iMSNC® Module | CNC program loading assistant - Page 2 of 3 - iMSNC® Module | Automatic mechanical probing calibration "THC" module | Automatic height control via arc voltage 2. Cutting table with zoned fume extraction | 3,000 x 1,500 mm 3. Grid cover for cutting table | 3,000 x 1,500 mm 4. USB 3.0 interface for storage device 5. MicroStep RemoteDiagnostics® remote maintenance module 6. Fully automatic torch support 7. HiFocus 161i neo plasma source from KJELLBERG with automatic gas console and Contour Cut Speed technology 8. Module for automatic gas console control HiFocus 161i neo 9. CNC interface for HiFocus 161i neo | Integration into CNC system 10. TEKA Eco75 filtration system - 7.5 kW with control unit 11. TEKA pre-separator TK-FVS 7000 - 12000 12. Remote control for the filtration system 13. Second hard drive with mirrored data (RAID system) 14. "MasterCut" plasma rotator with fully automatic support 15. ACTG® - Automatic calibration unit for the beveling system 16. ACTG® Calibration Report Njdpew I Sunofx Ahvjcn 17. "AsperWin Basic" CAM software for programming (single-user license) 18. "AsperWin BevelCut" module for bevel cutting (single-user license)

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ---- For the production of pipe geometries with bending radii from 1.5xD → Maximum bending capacity: pipe 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity: pipe 30 x 30 x 3 mm → Maximum bending capacity: pipe 42.4 x 2 mm (stainless steel max. Rp0.2 260 N/mm²) → Total connected load 3 kW → Pipe insertion length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and twisting axes. The control system's touchscreen display enables simple and intuitive programming and operation of the system. After the pipe is inserted, it is secured in the carriage by the chuck. This enables precise positioning of the pipe and thus the creation of dimensionally accurate geometries. The standard also includes a check of the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine will not issue a release. This eliminates the risk of incorrect operation. Optional additional features provide greater convenience and increase output, thus increasing the efficiency of the system. Data exchange from the optional TBS-3D pipe calculation program (PC version) takes place via USB stick or network. Existing pipe geometries can be imported using the software. Standard equipment: → 1.5 kW servo drive for the bending axis → Adjustable speed → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 120 mm → Bending shaft diameter 50 mm → Feed servo drive → Rotation servo drive → Three-jaw chuck for locking the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction Nedetr U Hlspfx Ahvjcn PLC control: → 10" color touchscreen → ETH 10/100, X2X Link, 2xUSB → Foot switch operation → Data transfer via LAN or USB network → Material database Unique graphical programming: Simple geometries can be calculated directly on the machine. The control system calculates the feed values and bending angles directly after entering the length and angle. Power consumption: 400V 16A Dimensions: L: 2.3 m x W: 1m x H: 1.4m Weight: approx. 1200 kg

Condition: good (used), Year of construction: 2012, CNC gantry plasma cutting machine Manufacturer: Microstep Model: SPL PAA 9001.25 Year of manufacture: 2012 CNC control Ncjdou U Hm Aspfx Ahvjn Working area: 2,500 x 9,000 mm 1 plasma torch with Kjellberg HiFocus 280i power source 2 oxy-fuel torches (propane) Beuting oscillating conveyor table Donaldson DFPRO12 filtration system for outdoor installation 25226ä