Water jet cutting system

OMAX DynaMAX 550P

Year of construction: 2007, condition: refurbished (used), GF AgieCharmilles Progress V3 Year of manufacture 2007 travels: X= 500 mm, Y= 350 mm, Z= 426 mm Travels U/V-axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 (in bath) / 800 (without bath) kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 500 mm²/min Available wire diameters: 0.15 - 0.33 mm Water bath machine with automatic wire threading and rethreading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER- hand box for comfortable set-up AGIE IPG-V generator AGIEVISION 5 control system Bdsdpfemmfwusx Ab Iea Dimensions (length x width x height): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine will be cleaned and overhauled by us after receipt of order. You will receive a warranty of 6 months on all machine parts. We are also happy to offer you commissioning and training

Condition: refurbished (used), functionality: fully functional, travel distance X-axis: 1,390 mm, travel distance Y-axis: 1,390 mm, table length: 2,030 mm, table width: 1,650 mm, warranty duration: 24 months, pump pressure: 4.138 bar, power: 30 kW (40.79 HP), 𝐃𝐢𝐞 𝐊𝐨𝐧𝐟𝐢𝐠𝐮𝐫𝐚𝐭𝐢𝐨𝐧 𝐝𝐞𝐫 𝐖𝐚𝐬𝐬𝐞𝐫𝐬𝐭𝐫𝐚𝐡𝐥𝐬𝐜𝐡𝐧𝐞𝐢𝐝𝐚𝐧𝐥𝐚𝐠𝐞 𝐢𝐬𝐭 𝐟𝐫𝐞𝐢 𝐰ä𝐡𝐥𝐛𝐚𝐫. 𝐌𝐞𝐥𝐝𝐞𝐧 𝐒𝐢𝐞 𝐬𝐢𝐜𝐡 𝐠𝐞𝐫𝐧𝐞 𝐮𝐧𝐝 𝐭𝐞𝐢𝐥𝐞𝐧 𝐒𝐢𝐞 𝐮𝐧𝐬 𝐈𝐡𝐫𝐞 𝐊𝐨𝐧𝐟𝐢𝐠𝐮𝐫𝐚𝐭𝐢𝐨𝐧𝐬𝐰ü𝐧𝐬𝐜𝐡𝐞 𝐦𝐢𝐭. 𝐙𝐮𝐦 𝐁𝐞𝐢𝐬𝐩𝐢𝐞𝐥: OMAX 5555 with 30 kW EnduroMAX pump and Tilt-A-JET cutting head - general overhaul with manufacturer certification and two-year warranty. Bjdsrm I Tqspfx Ab Isda OMAX waterjet cutting machines are ideal for pilot, one-off and small series production. Set-up times are significantly reduced compared to conventional manufacturing processes (e.g. no tool changes, no start hole drilling). The cost-cutting OMAX waterjet cutting machines are revolutionizing toolmaking as well as individual and series production, not including the numerous applications in the fields of mechanical and plant engineering. - 𝐀𝐮𝐟 𝐖𝐮𝐧𝐬𝐜𝐡 𝐅𝐢𝐧𝐚𝐧𝐳𝐢𝐞𝐫𝐮𝐧𝐠 𝐨𝐝𝐞𝐫 𝐋𝐞𝐚𝐬𝐢𝐧𝐠 𝐦ö𝐠𝐥𝐢𝐜𝐡 (𝐳.𝐁. 𝐛𝐢𝐬 𝐳𝐮 𝟖𝟔 𝐌𝐨𝐧𝐚𝐭𝐞𝐧) - up to 20 times faster - up to 50% more cost-efficient - accurate to ± 0.02mm - precise, clean, quiet, user-friendly - Software and machine components based on the latest OMAX technology The Tilt-A-Jet cutting head automatically calculates and compensates for the natural taper. This results in a right-angled cutting edge. In addition, precise small angles can be produced in contours (toolmaking & press molds with small, precise initial angles, etc.). Prompt delivery can be arranged with INNOMAX AG.

Condition: refurbished (used), functionality: fully functional, travel distance X-axis: 1,320 mm, travel distance Y-axis: 660 mm, table length: 3,680 mm, table width: 1,910 mm, warranty duration: 24 months, pump pressure: 4.138 bar, power: 30 kW (40.79 HP), 𝐃𝐢𝐞 𝐊𝐨𝐧𝐟𝐢𝐠𝐮𝐫𝐚𝐭𝐢𝐨𝐧 𝐝𝐞𝐫 𝐖𝐚𝐬𝐬𝐞𝐫𝐬𝐭𝐫𝐚𝐡𝐥𝐬𝐜𝐡𝐧𝐞𝐢𝐝𝐚𝐧𝐥𝐚𝐠𝐞 𝐢𝐬𝐭 𝐟𝐫𝐞𝐢 𝐰ä𝐡𝐥𝐛𝐚𝐫. 𝐌𝐞𝐥𝐝𝐞𝐧 𝐒𝐢𝐞 𝐬𝐢𝐜𝐡 𝐠𝐞𝐫𝐧𝐞 𝐮𝐧𝐝 𝐭𝐞𝐢𝐥𝐞𝐧 𝐒𝐢𝐞 𝐮𝐧𝐬 𝐈𝐡𝐫𝐞 𝐊𝐨𝐧𝐟𝐢𝐠𝐮𝐫𝐚𝐭𝐢𝐨𝐧𝐬𝐰ü𝐧𝐬𝐜𝐡𝐞 𝐦𝐢𝐭. 𝐙𝐮𝐦 𝐁𝐞𝐢𝐬𝐩𝐢𝐞𝐥: OMAX 2626 with 22 OR 30 kW EnduroMAX pump and OMAX cutting head - general overhaul with manufacturer certification and two-year warranty. OMAX waterjet cutting machines are ideal for pilot, one-off and small series production. Set-up times are significantly reduced compared to conventional production methods (e.g. no tool changes, no start hole drilling). The cost-cutting OMAX waterjet cutting machines are revolutionizing toolmaking as well as individual and series production, not including the numerous applications in the fields of mechanical and plant engineering. - 𝐀𝐮𝐟 𝐖𝐮𝐧𝐬𝐜𝐡 𝐅𝐢𝐧𝐚𝐧𝐳𝐢𝐞𝐫𝐮𝐧𝐠 𝐨𝐝𝐞𝐫 𝐋𝐞𝐚𝐬𝐢𝐧𝐠 𝐦ö𝐠𝐥𝐢𝐜𝐡 (𝐳.𝐁. 𝐛𝐢𝐬 𝐳𝐮 𝟖𝟔 𝐌𝐨𝐧𝐚𝐭𝐞𝐧) - up to 20 times faster Bdodpfx Aet A Az Tjb Ija - up to 50% more cost-efficient - accurate to ± 0.02mm - precise, clean, quiet, user-friendly - Software and machine components based on the latest OMAX technology The Tilt-A-Jet cutting head automatically calculates and compensates for the natural taper. This results in a right-angled cutting edge. In addition, precise small angles can be produced in contours (toolmaking & press molds with small, precise initial angles, etc.). The A-Jet is fully software-controlled, the multi-axis accessory allows angles of up to 60° to be cut in relation to the vertical. The A-Jet cuts countersinks and any contour chamfers. This accessory is also used to produce weld seam preparations. Prompt delivery can be arranged with INNOMAX AG.

Year of construction: 1999, condition: excellent (used), Glass tilting and transport table TRIULZI-IG Hydraulic With castor rollers Rollers are moving down for 360 degree glass movement (for sealing) 3600 mm length and 2400 mm working height Good working order Good condition Bodpfx Abjiy Dtbj Ijda As is Available immediately

Year of construction: 2021, condition: new, Derryglan Ltd - offer a wide range of industrial washer for every application, food, meat, butcher, bakery, pharma, labs, processors and general industry. Bdedpsgq N Ezofx Ab Ija Washers for Utensils, Crates, Bins, Knife, Tray cleaning applications. JEROS Washers have a specially designed lid which opens fully to allow easy operation and loading without causing backstrain to operators. The special JEROS features provide easy installation of the machines. Even in the smallest production areas. Further, the machine can be used as a sink when not in use as an automatic Utensil Washer. The flush hose The flush hose makes it possible to reuse the wash water e.g. for cleaning the floors. The flush hose can also be mounted on the mixer tap if required. Mixer tap Built-in mixer tap allows washer to be used as a sink with separate drainage. Fulfils the highest hygiene standards Even the most persistent dirt is removed! The fully automatical detergent dispenser ensures the optimum dosage of soap. The powerfull pumps and rotating wash arms provide a brilliant wash result.The end rinse pump guarantees a constant temperature of 85?C during the entire rinse period and sanitisation of the utensils is achieved. An additional advantage of the high temperature rinse is the fast drying of utensils by evaporation, a rinse aid can be automatically added to assist with this process The New Generation The 9100 Series comprises a total of five new models: 9110 / 9115 with rotating wash systems and 9117 / 9120 / 9130 with wash frame system. Inside, the machines have been thoroughly redesigned, focusing on hygiene and easy cleaning. The inside surfaces and rounded to ensure quick and automatic flow of water back to the filter and pumps. Filters, wash arms and wash frames come in electropolished surface finishes leaving the stainless surface completely smooth to prevent dirt from sticking to surfaces of the machine. This makes it easier to clean and maintain the machine Efficiency and optimum hygiene safty, including HACCP, form the base of the JEROS, set of values. Energy saving up to 25 % All the machines are now available with 'i-version' as standard. This means that all machines have water saving rinse nozzles and that both the wash and rinse tanks are isolated, as also the lid is with double wall and isolated. The machines therefore require less operating power, resulting in energy and water savings of up 25 % for all the models. It is also possible now to set the machines to 'auto off', as required, so that they do not have to be left unnecessarily in standby mode if they are not used for prolonged periods of time, etc. Eco wash As standard all models includes an environmentally friendly 'ECO wash' programme for less dirty objects. Pushing 'ECO wash', the machines wash with a reduced wash temperature and use less soap. Still the rinse with 85? C hot water for guarantee of hygienic result New double Micro-Filter: Unique double filtration system, with a progressive micro-fine filter, provides an efficient filtration of the wash water - thus entails a perfect washing result with less soap consumption and minimal water consumption Larger particles are collected in a coarse filter, wereas smaller particles are captured in the self-cleaning micro-fine filter. During the washing/rinse process, the collected particles are drainet out of the micro-fine filter from the bottom, just as well from the surface of water. this ensure a constant optimum wash water quality

Condition: refurbished (used), functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 660 mm, table length: 2,970 mm, table width: 2,080 mm, warranty duration: 24 months, pump pressure: 4.138 bar, power: 30 kW (40.79 HP), 𝐃𝐢𝐞 𝐊𝐨𝐧𝐟𝐢𝐠𝐮𝐫𝐚𝐭𝐢𝐨𝐧 𝐝𝐞𝐫 𝐖𝐚𝐬𝐬𝐞𝐫𝐬𝐭𝐫𝐚𝐡𝐥𝐬𝐜𝐡𝐧𝐞𝐢𝐝𝐚𝐧𝐥𝐚𝐠𝐞 𝐢𝐬𝐭 𝐟𝐫𝐞𝐢 𝐰ä𝐡𝐥𝐛𝐚𝐫. 𝐌𝐞𝐥𝐝𝐞𝐧 𝐒𝐢𝐞 𝐬𝐢𝐜𝐡 𝐠𝐞𝐫𝐧𝐞 𝐮𝐧𝐝 𝐭𝐞𝐢𝐥𝐞𝐧 𝐒𝐢𝐞 𝐮𝐧𝐬 𝐈𝐡𝐫𝐞 𝐊𝐨𝐧𝐟𝐢𝐠𝐮𝐫𝐚𝐭𝐢𝐨𝐧𝐬𝐰ü𝐧𝐬𝐜𝐡𝐞 𝐦𝐢𝐭. 𝐙𝐮𝐦 𝐁𝐞𝐢𝐬𝐩𝐢𝐞𝐥: OMAX 2626 with 22 OR 30 kW EnduroMAX pump and OMAX cutting head - general overhaul with manufacturer certification and two-year warranty. OMAX waterjet cutting machines are ideal for pilot, one-off and small series production. Set-up times are significantly reduced compared to conventional manufacturing processes (e.g. no tool changes, no start hole drilling). The cost-cutting OMAX waterjet cutting machines are revolutionizing toolmaking as well as individual and series production, not including the numerous applications in the fields of mechanical and plant engineering. - 𝐀𝐮𝐟 𝐖𝐮𝐧𝐬𝐜𝐡 𝐅𝐢𝐧𝐚𝐧𝐳𝐢𝐞𝐫𝐮𝐧𝐠 𝐨𝐝𝐞𝐫 𝐋𝐞𝐚𝐬𝐢𝐧𝐠 𝐦ö𝐠𝐥𝐢𝐜𝐡 (𝐳.𝐁. 𝐛𝐢𝐬 𝐳𝐮 𝟖𝟔 𝐌𝐨𝐧𝐚𝐭𝐞𝐧) - up to 20 times faster - up to 50% more cost-efficient - accurate to ± 0.02mm - precise, clean, quiet, user-friendly Bdodpfx Abot A Azms Ija - Software and machine components based on the latest OMAX technology The Tilt-A-Jet cutting head automatically calculates and compensates for the natural taper. This results in a right-angled cutting edge. In addition, precise small angles can be produced in contours (toolmaking & press molds with small, precise initial angles, etc.). The A-Jet is fully software-controlled, the multi-axis accessory allows angles of up to 60° to be cut in relation to the vertical. The A-Jet cuts countersinks and any contour chamfers. This accessory is also used to produce weld seam preparations. Prompt delivery can be arranged with INNOMAX AG.

Condition: like new (used), Weinig Hydromat H22N four-side planer - German production Bjdpjpvi Skjfx Ab Ieda - DTR - year of production 1992 - two rollers in the tabletop, milled before the first head - for wet wood TECHNICAL PARAMETERS: - planing width 220 mm - planing height 140 mm - spindle diameter 50 mm 1 lower head 7.5 kW 2 legal head 7.5 kW 3 left head 11 kW 4 upper head 7.5 kW 5 lower head 11 kW hydraulic feed pump motor power 15 kW feed speed smoothly adjustable up to 60 m/min feed on cardan shafts electric height adjustment pneumatic pressure five pulling rollers in the countertop eight steel upper pulling rollers one upper rubber pulling roller rests on horizontal spindles jointer on the lower spindles Transport dimensions 500x200x160 cm weight 4 tons

Condition: excellent (used), Sell well preserved Helmerding eccentric press Very little used! Bdsdjfdnw Hspfx Ab Isa

Condition: refurbished (used), functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,400 mm, table length: 3,900 mm, table width: 2,400 mm, warranty duration: 24 months, pump pressure: 4.138 bar, power: 37 kW (50.31 HP), 𝐃𝐢𝐞 𝐊𝐨𝐧𝐟𝐢𝐠𝐮𝐫𝐚𝐭𝐢𝐨𝐧 𝐝𝐞𝐫 𝐖𝐚𝐬𝐬𝐞𝐫𝐬𝐭𝐫𝐚𝐡𝐥𝐬𝐜𝐡𝐧𝐞𝐢𝐝𝐚𝐧𝐥𝐚𝐠𝐞 𝐢𝐬𝐭 𝐟𝐫𝐞𝐢 𝐰ä𝐡𝐥𝐛𝐚𝐫. 𝐌𝐞𝐥𝐝𝐞𝐧 𝐒𝐢𝐞 𝐬𝐢𝐜𝐡 𝐠𝐞𝐫𝐧𝐞 𝐮𝐧𝐝 𝐭𝐞𝐢𝐥𝐞𝐧 𝐒𝐢𝐞 𝐮𝐧𝐬 𝐈𝐡𝐫𝐞 𝐊𝐨𝐧𝐟𝐢𝐠𝐮𝐫𝐚𝐭𝐢𝐨𝐧𝐬𝐰ü𝐧𝐬𝐜𝐡𝐞 𝐦𝐢𝐭. 𝐙𝐮𝐦 𝐁𝐞𝐢𝐬𝐩𝐢𝐞𝐥: OMAX 55100 with 22, 30 OR 37 kW EnduroMAX pump and OMAX cutting head - general overhaul with manufacturer certification and two-year warranty. OMAX waterjet cutting machines are ideal for pilot, one-off and small series production. Set-up times are significantly reduced compared to conventional manufacturing processes (e.g. no tool changes, no start hole drilling). The cost-cutting OMAX waterjet cutting machines are revolutionizing toolmaking as well as individual and series production, not including the numerous applications in the fields of mechanical and plant engineering. Bodpfx Aorm Imnob Isda - 𝐀𝐮𝐟 𝐖𝐮𝐧𝐬𝐜𝐡 𝐅𝐢𝐧𝐚𝐧𝐳𝐢𝐞𝐫𝐮𝐧𝐠 𝐨𝐝𝐞𝐫 𝐋𝐞𝐚𝐬𝐢𝐧𝐠 𝐦ö𝐠𝐥𝐢𝐜𝐡 (𝐳.𝐁. 𝐛𝐢𝐬 𝐳𝐮 𝟖𝟔 𝐌𝐨𝐧𝐚𝐭𝐞𝐧) - up to 20 times faster - up to 50% more cost-efficient - accurate to ± 0.02mm - precise, clean, quiet, user-friendly - Software and machine components based on the latest OMAX technology The Tilt-A-Jet cutting head automatically calculates and compensates for the natural taper. This results in a right-angled cutting edge. In addition, precise small angles can be created in contours (toolmaking & press molds with small, precise initial angles, etc.). The A-Jet is fully software-controlled, the multi-axis accessory allows angles of up to 60° to be cut in relation to the vertical. The A-Jet cuts countersinks and any contour chamfers. This accessory is also used to produce weld seam preparations. The machine is currently undergoing a general overhaul, so the images are similar to the offer. Prompt delivery can be arranged with INNOMAX AG.

Year of construction: 2011, condition: good (used), Additional equipement not included. Bedpfxepxnwzo Ab Ioda