Pipe grinding machine

NS Maquinas ML 100

Condition: new, The tube linishing / satin finishing machine – ML100 – is the perfect choice for finishing the surface of round, oval and elliptical tubes. The ML planetary system enables the work without rotating the tube - delivering the best results on both bent and curved tubes. The auto feeding system transports straight tubes safety and automatically through the finishing station, enabling a consistent and high productive tube polishing quality. Minimum tube vibration even on the biggest lengths: With the ML Planetary System the tube is not spinning. The abrasive belts rotate around the tube while it is safely transported by the feeding systems. Straight or curved tubes polishing: ML100 was designed to finish either straight tubes (automatically) or bent tubes (manually). Quick set-up: Simple to work with ML100 tube polishing machine. Automatic feeding is hinge mounted and easily removable for bent tube finishing. Low heat: The soft contact with abrasive belts with ML Planetary System has a very low heat on the tube surface, unlike other conventional systems. Oval tubes: Fgjdod Hfnbepfx Alqeb Oval or elliptical tubes polishing or simply out-of-round tubes can be safety and consistently finished with ML100 Finishing after tube drilling: Maximum adaptability of the abrasive belt to holes or graps in the material surface. Technical Details - ML100: Working capacity (Ø mm) 10 - 114 No. Stations 1 Abrasive belt dimensions (mm) (2x) 50x940 Abrasive belt speed (m/s) 3-22 Feeding speed (m/m) 1-5 Abrasive belts motor (kw) 3 Wheel motor (kw) 1.5 Feeding motor (kw) (2x) 0.12 Total power (kw) 5 Consumption (A) 11 Dust extraction connection (Ømm) 80 Dimensions (mm) 750x1000x1300 Weight (kg) 250

Condition: used, Year of construction: 2004, functionality: fully functional, Amada HFE 220- L Year of construction 2004 Fgodpfx Aleuiwypoqeb Laser height adjustment Working width 3100mm pressing force 220 tons with many tools

Condition: new, Year of construction: 2025, Max Ø 114mm; Straight and bent round tubes; One grinding station; Grinding of straight and bent round tubes up to Ø114mm with maximum flexibility. The ML100 tube grinding machine is the perfect choice for surface grinding and polishing of round, oval and elliptical tubes. The ML planetary belt system allows belt grinding without rotating the tube to deliver the best results. The feed system safely feeds the straight tubes into the grinding station for a consistent and productive surface finish. ML100 Working capacity (Ø mm) 3 - 114 No. of stations 1 Sanding belt, dimensions (mm) (2x) 50x940 Sanding belt speed (m/s) 3-22 Sanding belts Motor (kW) 3 Wheel, motor (kW) 1.5 Total power (kW) 4.5 Power consumption (A) 11 Dust extraction connection (Ø mm) 80 Dimensions (mm) 750x1000x1300 Fsdpfxet Eaw Do Alqjgb Weight (kg) 250

Condition: new, DESCRIPTION DM100 Z2C - performs edge rounding and removes sharp burrs from both the inner and outer edges of steel, stainless steel or aluminium parts after laser, shear or punch cutting of metal parts from 50 x 50 mm up to 1100 x 100 mm in size. Ekdjtxp The 1st station processes the products through a contact roller (approx. 55° shore) with an abrasive belt and removes strong burrs in the first step. The 2nd station processes the products with 2 counter-rotating cross belts each from below and from above. The cross belts round off the parts to be machined on both the inner and outer edges. A big advantage is also the deburring of products with surface protection foil, because only the edges are processed without damaging the foil. Technical data - DM1100 Z2C: Working capacity (Ø mm) 1100x100 No. of belt stations (Z) 1 No. of cross belt stations 2 Abrasive belt, dimensions (mm) 1100x2200 Fgjdpjd Ixadefx Alqjb Abrasive belt speed (m/s) 8-22 Cross belt speed (m/s) 2-8 Feed speed (m/s) 0.6-3.2 Sanding belt motor per head (kW) 18.5 Cross belt motor (kW) (2x) 3 Feed motor (kW) (3x) 0.18 Total power (kW) 33 Power consumption (A) 62 Rod suction connection per head (Ø mm) 150+185 Dimensions (mm) 3600x2330x2350 Weight (kg) 5000

Condition: good (used), Year of construction: 2019, functionality: unexamined, machine/vehicle number: 10021711, overall weight: 1,400 kg, load capacity: 210 kg, controller manufacturer: KUKA, controller model: KRC 4, 1. Robot Arm Fgedpsv Tyw Defx Alqsb • Manufacturer: KUKA Deutschland GmbH • Type: KR 210 R3100 Ultra (KR210R3100 ULTRA C4 FLR) • Item number: 10021711 • Serial number: 1239324 • Year of manufacture: 04/2019 • Weight: 1154 kg • Payload: 210 kg • Reach: 3096 mm • Country of origin: Germany 2. Robot Controller • Type: VKR C4 • Item number: 1106074 • Serial number: 3007941 • Year of manufacture: 10/2019 • Weight: 168 kg • Supply voltage: 3x400V • Mains frequency: 50/60 Hz • Full load current: 22 A • Mains fuse: 25 A • Country of origin: Hungary 3. Extraction system • Manufacturer: ESTA Apparatebau GmbH & Co. KG • Type: Small Dust Collector OM-8 • Serial Number: 19002523 • Year of Manufacture: 2019 • Voltage: 400 V • Power: 0.55 kW • Current Consumption: 1.4 A • Noise Level: 10A [dBA] • Volume Flow (Max.): 600 m³/h • Weight: 60 kg • Protection Class: IP44 • Max. Negative Pressure: 1600 Pa • Country of Origin: Germany 4. Equipment & Special Features • Teach panel with connection cable (visible in the control cabinet) • External electrical/control cabinet installation with Ethernet and safety connections (typical for KUKA) • Additional attachment mounted on the robot flange, for special applications (e.g. B. Grinding or deburring applications) • Base for stationary floor mounting • Control and power cables pre-assembled and integrated • System is stored on pallets and ready for transport

Condition: used, Year of construction: 1983, Technical details: Pressure: 160 t throat: 360 mm max. ram stroke: 500 mm distance table/ram: 800 mm clamping plate on table: 1250x630x100 mm passage opening in table: 4x Ø 62mm mm ram speed - forward: 200 mm/s ram speed - reverse: 125 mm/S ram surface area: 450 x 850 mm mortise hole in ram: Ø 49 mm height over floor: 810 mm total power requirement: 17 kW weight of the machine ca.: 7200 kg dimension machine xH: 2,1 x 1,4 x 3,4 m Fgjdpfxou Nfvuo Alqsb manual counter *

Condition: new, Year of construction: 2024, functionality: fully functional, Universal CNC cylindrical grinding machine for high-precision internal & external cylindrical grinding MBF 453U from the MaiBase platform The machine is a completely new development with strong dimensions in a small space! Technical data: Center width: 430 mm Standard center height: 200 mm Grinding length: 400 mm Grinding wheel diameter: 500 mm Fsdpfx Aetrf Smelqegb Z-axis adjustment path: 550 mm X-axis travel: 385 mm Dimensions and weight: 2200 x 2500 x 2400 mm // 6500 kg Equipment of the machine: - FANUC Oi-F Plus control system - Grinding headstock (swiveling) with 15kW motor spindle - Workpiece headstock MK5 - Tailstock MK3 with 20 mm stroke (optional 60 mm / 120 mm) - Handwheel for manual axis movement - Z-axis - X-axis - C-axis - B-axis - Glass scales for X- and Z-axis - Internal grinding spindle FISCHER UJ80 - Internal grinding spindle (GMN motor spindle) optional - Dressing spindle attached to the workpiece headstock for rotary dressing - Automatic door drive

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, load capacity: 210 kg, arm reach: 2,696 mm, control cabinet width: 560 mm, control cabinet height: 1,060 mm, type of input current: DC, workpiece weight (max.): 1,111 kg, control cabinet length: 800 mm, throat depth: 2,696 mm, Product description: 24 pieces In stock Industrial KUKA KR 210 R2700 Prime KR C4 Manufacturer: Kuka Year of manufacture: 06:2014 Serial number:635949 Type: KRC4 Load capacity:210 kg Axles: 6 Reach: 2696 mm Repeatability: ± 0.06 mm Scope of delivery - Robot - control cabinet - cable - Teach box Prices are net plus VAT Can be viewed at any time under power. Robot is in very good used condition Delivery time subject to immediate prior sale Fjdpfxoqv D Tps Alqsgb Upon delivery you will receive an invoice with VAT shown Item condition "New" - partly without original packaging, traces of storage possible, delivery as pictured Item condition "Used" - items show signs of use, these are therefore not described further,

Condition: new, functionality: fully functional, input voltage: 230 V, Cobot palletising solution - Relieves employees from heavy lifting and monotonous physical strain - System can be configured and adapted to individual requirements - Requires less floor space than conventional palletising solutions (dimensions: 2,650 x 1,600 mm) Fgedpfx Aljrbz Rxoqeb - No stationary safety technology required, making UNIPAL easy and flexible to use - Dashboard for process overview - Up to 22 kg payload and 2,200 mm palletising height - Fast and easy retooling - Plug-and-play (requires 230 V mains supply) and 6 bar compressed air

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, saw blade diameter: 460 mm, cutting range round steel at 90°: 150 mm, working height: 1,030 mm, MSK 471 NA automatic straight cut circular saw for HSS and carbide saw blades Cutting range round up to 150 mm, square up to 140 mm Suitable for almost all profile shapes and solid material Fgedpfsubbw Aex Alqob Automatic cut-off sorting by means of cut-off gripper Machine tested at KALTENBACH, wear parts replaced