Container belt drying system

NEWtrainer ALLinDRYer M400

Year of construction: 2003, condition: ready for operation (used), Used drum dryer manufactured by SAFEM, extracted from a line of gluten-free products. Fluid: Steam Design pressure: 12 bar Maximum operating pressure: 9,5 bar Iedpfx Asq Nmuwjh Njal Test pressure: 24 bar Maximum operating temperature: 192ºC Volume: 4.55 m3 Pressure x Volume: 54.6 bar x m3

Condition: ready for operation (used), DRUM MOTORS drum motors used large stock of belt width 300-1400 mm Iodpfxoi A Apus Ah Njal

Condition: good (used), Year of construction: 2016, I sell the multirip saw of slovenian production MEBOR VR900. Cutting height under the blade 160mm / possibility of adjustment Isdpfjxxgy Sjx Ah Neal Width of cut on the feed wheel max. 900mm. 1 pc. moving head with laser adjustment. Diameter of main saw blade 300 - 500mm. Motor 55 KW. Total weight approx. 4000kg. Blades and adjusting rings included. The machine is in stock in Kežmarok, Slovakia. Available immediately.

Condition: used, functionality: fully functional, Foundry factory for sale, Property includes 15 buildings, 6 hectares of land. Located at the Karhula industrial site next to the city of Kotka in southeastern Finland, Karhulan Valimo was founded in the 1880’s. In 1902, the foundry was merged with a wood grindery, glass factory, brick factory and engineering works to form the Karhula Oy. In 1915 the Karhula Factories were sold to Ahlström Corporation. Iasdpfxouxmt Tj Ah Nel The current Foundry was built in 1960 and in 2000 Ahlström sold the foundry to Sulzer Pumps Finland. In 2016 Sulzer Pumps decided to close the foundry and it was sold to Karhulan Foundry Oy, which was unfortunately declared bankrupt in March 2021. Throughout its history, the foundry has been known of been able to produce highly demanding castings particularly in high alloyed steels. In 2022 Karhu Assets Oy bought the facilities and machinery of the foundry. Most of the equipment in the fettling shop has already been sold, while most of the machinery in the moulding department and meltshop are intact and available. All heat treatment furnaces, a total of 10 units, are in place and available for sale. Welcome to visit on the site! The equipment is located in Kotka, 48600, Finland, and is sold EXW Kotka in its current condition. The flight time from most European cities to Helsinki, Finland, is approximately 2 hours, and the drive from Helsinki to Kotka via the motorway is about 120 km (1 hour). You are welcome to visit us in person to inspect the foundry machinery! Second-Hand Condition: All machines, equipment, and articles are sold in a used condition. No Warranty, Exchange, or Guarantee: The seller does not offer any warranties or guarantees on the items sold. There is no option for exchange or refund, so the buyer accepts any risks associated with the purchase. As Inspected On Site: The buyer must inspect the goods on-site before making the purchase, as the sale is final once inspected. The seller will not be held responsible for any defects found after the purchase.

Condition: excellent (used), 90 running meters pallet rack Stow Used, very good condition, see pictures height 6 m depth 100 cm beam length 2,70 m Load / compartment 3000 kg Iedpfx Ahjiwkn Ro Njal Frame blue Carrier orange Negotiable price: € 8.650,-- net ex stock Offer consists of: + 33 pcs. frames pre-assembled, 12t field load, depth 100 cm, height 6 m + 192 pcs. beams, length 2,7 m, 3000 kg payload/slot + 384 pcs. suspension locks + 132 pcs. concrete anchors Load plate Goods are in stock. Transport and assembly possible on request. Inspection possible at any time by arrangement. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous articles from various areas broom-clean business clearances company liquidations Fast - flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Year of construction: 2000, condition: excellent (used), functionality: fully functional, Double-shaft trimming saw, manufacturer Link, type CSMK 285 A1 B1, with spraying unit Saw head clamping length: 4 x 125 mm Weight: 17,500 kg Extraction device Av 21 CSMA 540 Extraction SE - separation conveyor Isdpfxswww Iyo Ah Njal Drive power: 4 x 132 kW Feed rate up to 150 m/min

Condition: excellent (used), Year of construction: 2020, Manufacturer: Greif Velox Year of manufacture: 2020 Type: BVP Particle sizes: 30 μ - 5 mm Bag size: 9.5 - 30 kg Bag capacity: up to 250/h Iaedpfx Aswcfwysh Nel Containers: Valve bags made of paper, PE, PP fabric Fully automatic single-spout system with bag feeder, 500-liter pre-bin, dust extraction without collection container, control panel 1x conveyor belt 650 x 2,000 mm

Condition: excellent (used), functionality: fully functional, machine/vehicle number: Deilman S, Second hand but fully renovated dipping tank for wood treatment. 6,5m long, 1,35m wide and 1,5m high with loading platform 6m. Automatic steering with 4 programs of dipping. Ready for work. Can dipp packets 1,2 x 1,2m - ideal for pallet boards Iaedsudwdwjpfx Ah Nsl

Year of construction: 2024, condition: new, Overview - of the different variants *Not every position is required: Optional: -Bale shredder MHB from 24.990 € net -MHZ straw mill from € 7,980 net -Special hopper 970 € net -Cyclone from € 3,750 net -Sheet metal silo demonstrator with discharge (only sketched in the picture) *optional, if you want to load with the wheel loader Unit price net from € 14,750 - Demonstrator -Dedusting auger - length approx. 4 m 4 sieves are mounted on the underside, which are extracted. Unit price net from: 9.750 € - Extraction parts / hoses flat rate 945 € net - Complete control system Net unit price: € 2,750 Ijdpsff Sbijfx Ah Noal -Demonstrator extraction unit MMJET 160 Demonstrator, with cleaning Connection 160, fan 2,2kw air capacity 1850m³ /400 V Automatic compressed air cleaning Unit price net from: 6.950 € -Baler B 400 Bales approx. 400x400x800 (height adjustable) Up to 30 bales per hour with + - 20 kg from 59.995 € net *A reference system (baler) is located in zip code: 64579 Gernsheim Technical data: Bale size (WxDxH): 400 x 400 x 800 (height can be adjusted on request) Bale weight +/- 20 KG (depending on material) Capacity: approx. 30 bales per hour Storage container approx. 0.7m³ capacity Filling level sensors for min./max. filling level in the container Hydraulic pre-compressor Hydraulic compression ram Hydraulic unit, valve block with oil tank Pump 18.5 KW / 50 liters Rollers in the bale chamber for easy bale push-off Dimensions (l x w x h) 3105x2830x2455 mm Weight approx. 1500 KG mütek baling presses / wrapping machines are designed for the production of bales from a wide variety of materials such as shredded micanthus or elephant grass, wood chips, sawdust and shredded straw. straw. The machine is characterized by a robust design that guarantees consistent quality in continuous operation. quality in continuous operation. The baler compacts the material filled into the storage container without the addition of binding agents and packs the material into plastic bags. The volume of the material can be considerably with the baling press. The volume reduction rate depends on the material. The maximum material moisture content must not exceed 18 % Atro. The container of the mütek baler can be fed automatically or manually and has a volume of approx. 0.7 m³. volume of approx. 0.7 m³. Containers with a larger volume or with an attached suction and filter system as a complete disposal unit are also available. In addition to automatic filling via deduster, mütek also offers filling by means of screw conveyors. With both variants, automatic automatic dedusting is possible. mütek baling presses are equipped with a control cabinet for the control system. In the standard version, the dimensions of the bales (width x depth x height) are 400 x 400 x 800 mm. However, the height can be adapted to your requirements on request. The following advantages arise in the production of bales: - simple and safe storage - No loose dust - Minimization of the storage volume - Low transport volume *Requirements for source material: - dry (max. 30 % ATRO) - Maximum length 35 mm

Condition: good (used), Bale-Pak for pressing shavings in good condition including a scraper conveyor, an ABB stacking robot and an automatic plastic wrapper Isdpfxjimv N To Ah Noal