CNC lathe

Nakamura Tome WT 250 inkl. Portallader GR 203

Condition: good (used), Year of construction: 2014, 900mm Swing, 650mm max. machining diameter, 992 mm maximum turning length, 1000rpm spindle, Gsdswwtrbopfx Agbobg Spindle bore 275mm, 10 station turret 45kW spindle motor, FANUC Series 32i control, 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant,

Condition: new, Year of construction: 2025, Top height 250 mm Spindle bore 103 mm Tip width 1000 mm Circumference diameter over bed 500 mm Circumference diameter in the crank 710 mm Circumference diameter over support 300 mm Speed range 9 - 1600 rpm (24 steps) Spindle nose DIN 55029 Camlock D1-8 Range of longitudinal feeds 0,028 - 6,43 mm / rev; 93 steps Range of feed rates 0,012 - 2,73 mm / rev. 93 steps Metric threads 0.5 - 224 mm; 48 steps Gbedpfx Agjd I A Dhobog Inch thread 72 - 1/8 gear / inch; 49 steps Module thread 0.5 - 112 mm; 42 steps Diametrical thread 56 - 1/4 DP; 42 steps Quill ø 75 mm Quilltravel 150 mm Quill holder Morse cone 5 Motor power 7.5 kW Weight 2,750.00 kg Dimensions 2500 x 1100 x 1380 mm

Condition: excellent (used), Year of construction: 2011, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, nominal power (apparent): 30 kVA, torque: 163 Nm, table load: 400 kg, rotary table diameter: 400 mm, rotational speed (max.): 15,000 rpm, coolant supply: 20 bar, number of spindles: 48, tool length: 300 mm, tool diameter: 70 mm, tool weight: 10 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Technical characteristics: CNC OSP P 200 Chip conveyor 48 tools Continuous table 360,000 pos. 15,000 rpm BT 40 Cooling through spindle 20 Bar Presetting on board table Shower work area washing system Godpfx Asuw Sq Ujgbebg P.S. The machine has always worked in full oil Teflon material

Condition: new, Year of construction: 2023, pipe drilling machine, inclined drilling machine, automatic drilling machine TDM100, manual, with one drilling head IMMEDIATELY AVAILABLE FROM STOCK + TO BE INSPECTED UNDER POWER - minimum quantity lubrication - manual material clamping - manual feed - max. tube length 3.000mm (option 6.000mm) - positioning accuracy +/- 0,2mm - 10 stops (can be extended as required) - manual insertion and removal of material - drill head swivels +/- 50 - manual 360 degree tube swiveling device - power drilling unit 1 x 2,2 kW - motor speed 295 - 2950 rpm - display speed on touch panel - illumination drilling unit Godpfxslgvkij Agbjbg - integrated tool cabinet - round tube up to 114mm - square up to 100 x 100mm - flat material up to 100 x 15mm - T-profile up to 100 x 100 x 12mm - L-profile up to 100 x 100 x 8mm - Double post up to 100 x 15mm - Flow drilling up to M12 - Drilling up to Ø 50mm

Condition: used, Intake opening: 1.200 x 1.600 mm Motor power: 110 kW, without gearbox Rotor flight circle: 380 mm Rotor speed: approx. 470 rpm Cutting system: 66 cutting inserts on toolholder Gbodpfx Agjbq Stqjbog Screen: reinforced screencage, 15 mm perforation Counter knife: with mechanical adjustment device Machine weight: approx. 5.900 kg

Condition: good (used), Year of construction: 2012, Datasheet: Travels: Gbsdpfx Agsq Dpuzjbjg Turning length: 1,000 mm Turning diameter: 360 mm X-axis: 260 mm Z-axis: 1,000 mm C-axis: 0.001 degrees Spindle machining diameter: 410 mm Swing over bed: 580 mm Main spindle: Cross section: 80 mm Spindle drive: 22 kW Spindle speed: 5,000 rpm Torque: 427 Nm Weight and dimensions: 6,000 kg LxWxH: 3,000x1,800x2,3000 mm Touchsetter NC tailstock 12-position turret with driven tools Kitagawa B210 chuck Mayfran chip conveyor 8 bar coolant pump

Year of construction: 2024, condition: new, arm length 5 m total column height 5,5 m weight max. in kg 80 kg travel of hook 4,3 m *NEW*Never used*OVP* Pillar jib crane - lifting capacity 80 kg Gbedpfx Agevzhhtobog with electric chain hoist, crane DEMAG type DCM-Pro 2 80 1/1 HV.3 V16/4 Year of manufacture Hook path max. 4.3 m Chain size 4.2 x 12.2 RDC/TDK Mains connection 380 - 415 v Uc: 24 v

Condition: used, Year of construction: 2004, MORI SEIKI MT 2000 SZ TURN MILL CENTRE MAKE MORI SEIKI MODEL MT 2000 YEAR 2004 CONTROL MSG 501 SWING OVER CROSS SLIDE 599.5 mm SWING 749.0 mm CHUCK SIZE 250.0 mm DISTANCE BETWEEN CENTRE 1280.0 mm Gedjuq Iwpjpfx Agbobg MAX. CUTTING DIAMETER 548.6 mm MAX. CUTTING LENGTH 1018.0 mm BAR CAPACITY 63.5 mm C AXIS 0.001 DEGREE SPINDLE RANGE 4500 rpm SPINDLE MOTOR 20 hp SPINDLE NOSE A2-6 SUB SPINDLE BAR CAPACITY 43.18 mm SUB SPINDLE MOTOR 10 hp SUB SPINDLE SPEED 6000 RPM TOOL CHANGE CAPACITY 60 STATION TURRET 12 STATIONS TRAVEL B AXIS +/- 120 DEGREE Y AXIS +/- 78.7 MM PLUS CNC BARFEED PART CONVAYOR TOOL SETTING PROBE Y AXIS HIGH PRESSURE SWARF CONVAYOR FULL SET OF MANUALS GOOD RANGE TOOLING

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Equipment: documentation/manual, We inform, that we currently only sell or deliver to the D-A-CH and Be-Ne-Lux countries. We ask for your understanding Gbsdpfx Ajxmgwasgbog

Condition: good (used), Year of construction: 2008, In good technical condition and fully operational. Year of manufacture: 2008. Additional Y-axis ±60 mm Maximum spindle speed 3,000 min⁻¹ Spindle motor power 22/18.5 kW Maximum driven tool speed 6,000 min⁻¹ - 300 mm chuck with 90 mm through hole, spindle head A2-8 - Increased power and torque 25/30 kW, 1,000/1,300 Nm - Turning diameter 420-500 mm - Turning length 1,250 mm Gedpfx Aoxdcigogbobg - C-axis, driven tools - NC tailstock, fully programmable, separate motor - Increased Z-axis power - New chip conveyor